The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-01-2018, 07:52 PM   #1
farmall
Registered User
 
Join Date: Jun 2011
Location: Central OR
Posts: 323
Aftermarket F/I and dual tanks 81 K30

I was looking at an F/I system with the fuel pump in a small tank in the engine compartment thinking that would save me from 2 in tank pumps and return lines but it looks like it still uses return lines. I have no return lines now.

I also have an 87 parts truck with dual tanks. Did those TBI 87s have pumps in the tanks that might be compatible with an aftermarket system?

Any advise or recommendations please. What have you all done?
__________________
1955 GMC 250 8 Flatbed
1971 C30 157" 350 4spd PS PB White With Blue Int 10' Flatbed
81 GMC K30 CnC 9' Flatbed 454 T400
71 LT1 Convertible, 72 Coupe
69 CJ5 V6, 75 CJ6 V8
67 M715, 72 M35A2 Bobbed, 95 XLC2
farmall is offline   Reply With Quote
Old 12-01-2018, 08:15 PM   #2
hatzie
Senior Member
 
hatzie's Avatar
 
Join Date: Oct 2008
Location: Wentworth, NH
Posts: 3,165
Re: Aftermarket F/I and dual tanks 81 K30

What is the fuel pressure in the aftermarket system?

Some new Pollack dual tank valves are rated at 65PSI but that's the limit using the near stock valve.

You can install higher pressure and higher volume Walbro fuel pumps in the tank but it's not plug N play. You need to modify the electrical connection to the fuel pump.
__________________
1959 M35A2 LDT465-1D
1967 Dodge W200 B383, NP420/NP201
1969 Dodge Polara 500 B383, A833
1972 Ford F250 FE390, NP435/NP205
1976 Chevy K20, 6.5L, NV4500/NP208
1986 M1008 CUCV
2000 GMC C2500, TD6.5L, NV4500
2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263
2009 Impala SS LS4 V8


RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials...Please include at least the year and model in your threads. It'll be easier to answer your questions.
And please let us know if and how your repairs were successful.
hatzie is online now   Reply With Quote
Old 12-01-2018, 10:11 PM   #3
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 1,238
Re: Aftermarket F/I and dual tanks 81 K30

i just finished this kind of setup . i kept it stupid simple .

2 tanks . pic a side for primary with psi pump specs the efi needs . it gets the job of the efi system only .

other tank is a transfer tank with a std tbi pump on it .

send fuel over to the other primary tank and tee in to the filler neck vent hose right at the tank as its all up hill from there to the filler neck / cap area . fuel has to go down hill in to the tank .

next i rewired my indash switch for power feed out only to transfer tank .

next i installed a seperate gauge ( if you want one ) and a BIG red light that only lights when pumping fuel over .

i tried it for the first time yesterday and was impressed . no waiting in line at the fuel station just pic a pump with 2 tanks . just so happened i had pass side open and mine is the transfer tank on the pass . i filled it up full . took off down the road and flipped my switch and in 5 miles my driver side tank went from 1/8 to 3/4 tanks .

this is just my simple what i had version and do as you wish . good luck and remember to double check them fuel lines for leaks
Attached Images
 
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
sweetk30 is offline   Reply With Quote
Old 12-03-2018, 02:53 PM   #4
RADustin
Senior Member
 
Join Date: Jun 2017
Location: New Orleans
Posts: 293
Re: Aftermarket F/I and dual tanks 81 K30

depending on your flow requirements, the selector valve should work- it'll switch the feeds, returns, and senders.
__________________
1949 Chevy 3100 P/U
http://67-72chevytrucks.com/vboard/s...d.php?t=302780

1976 GMC Sierra Classic C35 CCSB
http://67-72chevytrucks.com/vboard/s...25#post8188825
RADustin is offline   Reply With Quote
Old 12-03-2018, 09:33 PM   #5
dieseldawg142
Registered User
 
dieseldawg142's Avatar
 
Join Date: Jul 2011
Location: back 40, bc
Posts: 2,759
Re: Aftermarket F/I and dual tanks 81 K30

i've been running an edbrock pro-flo on my 454 for over 15 yrs. ('85 K30 crew)
i also have dual tanks as well. my vent lines stayed vent lines, the orig fuel line became my return, and i used a bigger line for the fuel. all the lines hook right up to the selector switch, so it functions just as stock, and i used the external fuel pump that came with the system, it's installed on the frame in front of the selector switch. in all the time i've had the p. flow, only thing i've done to it is replace the fuel pump once, couple yrs ago, which was my fault, too far out in the bush and had to run my tanks almost empty to get back to civilization....
in cab switch and fuel gauge work as they should, no probs
dieseldawg142 is offline   Reply With Quote
Old 12-03-2018, 10:28 PM   #6
SunSoaked
Senior Member
 
Join Date: Dec 2011
Location: Yuma Arizona
Posts: 862
Re: Aftermarket F/I and dual tanks 81 K30

I recently ran a sniper (60 psi) in my 85 with dual tanks. I used the Edelbrock remote sump mounted near the driver side headlight. Ran the stock mechanical fuel pump to the sump and a high pressure line to the sniper. Worked like a charm. Didn't have to mess with the original tank, valve or wiring.
SunSoaked is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:21 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com