Door window weatherstripping kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72LSLB · 03-13-2017, 01:18 PM

I'm going to replace all of my 72 c10 lwb door window and vent weather-stripping, felt etc; was going to purchase from LMC; are their kits ok quality wise or should I be looking at another vendor? Also; the drivers side window has to be messed with to get it to come down from the most upward position, it gets hung up; is that a regulator issue or is there something else I can adjust? Thanks!

Toads70 · 03-13-2017, 02:13 PM

Precision makes the best from everyone i ask.That is what i bought from gmcpauls though other vendors sell them as well. lmc makes great products i do not know what brand they sell. hope this helps

67ChevroletDude · 03-13-2017, 02:36 PM

I have heard lots of negatives on LMC. I'm replacing all my weatherstripping too and X2 on Precision Brand and GMCPauls stuff!

I order the vent window weatherstripping from Classic Parts because of this:
http://67-72chevytrucks.com/vboard/s...=660294&page=2

**DaHos** · 03-13-2017, 03:08 PM

Precision is what I sell and use.

The hang up issue may be regulator but also may be the vent window and/or the rear window channel run seal, they deteriorate and "gum up" the channels.

jgr · 03-13-2017, 03:51 PM

Who sells Precision Brand?

72LSLB · 03-13-2017, 04:37 PM

Quote:

Originally Posted by DaHos

Precision is what I sell and use.

The hang up issue may be regulator but also may be the vent window and/or the rear window channel run seal, they deteriorate and "gum up" the channels.

It's hanging up near the far left side (on drivers door). I have to grab the upper left of the glass and lift it to get it to start going down.

What is the name of your company so I can check out your prices on a complete kit.

**DaHos** · 03-13-2017, 04:55 PM

Quote:

Originally Posted by 72LSLB

It's hanging up near the far left side (on drivers door). I have to grab the upper left of the glass and lift it to get it to start going down.

What is the name of your company so I can check out your prices on a complete kit.

You may also want to check the window sash on the bottom of the glass, they tend to rust and may be loose on the glass (my guess the rear channel run is brittle and not allowing it to run square in the channel)

No website, just a small local shop. Im a vendor for Precision, stock items or drop ship. I will send you a PM.

72LSLB · 03-13-2017, 04:56 PM

Quote:

Originally Posted by DaHos

You may also want to check the window sash on the bottom of the glass, they tend to rust and may be loose on the glass (my guess the rear channel run is brittle and not allowing it to run square in the channel)

No website, just a small local shop. Im a vendor for Precision, stock items or drop ship. I will send you a PM.

Thank you sir!

**samkost** · 03-13-2017, 05:37 PM

I also recommend Precision brand rubber.
I am using Precision products (Doors, Cab, Windshield and Back Glass) that I purchased from Wes at Classic Heartbeat.
http://www.classicheartbeat.com
He has dealt with Precision to reproduce the best quality aftermarket rubber products for our trucks.
Give him a call, he will answer all your questions.

03-13-2017, 01:18 PM	#1
72LSLB Registered User Join Date: Feb 2017 Location: Harvard Illinois Posts: 76	Door window weatherstripping kit I'm going to replace all of my 72 c10 lwb door window and vent weather-stripping, felt etc; was going to purchase from LMC; are their kits ok quality wise or should I be looking at another vendor? Also; the drivers side window has to be messed with to get it to come down from the most upward position, it gets hung up; is that a regulator issue or is there something else I can adjust? Thanks! __________________ 1972 C10 Custom Deluxe 4.8 LS 4l60e

03-13-2017, 02:13 PM	#2
Toads70 Registered User Join Date: Aug 2016 Location: Marietta Georgia Posts: 8	Re: Door window weatherstripping kit Precision makes the best from everyone i ask.That is what i bought from gmcpauls though other vendors sell them as well. lmc makes great products i do not know what brand they sell. hope this helps

03-13-2017, 02:36 PM	#3
67ChevroletDude Registered User Join Date: Aug 2016 Location: Azle, Texas Posts: 38	Re: Door window weatherstripping kit I have heard lots of negatives on LMC. I'm replacing all my weatherstripping too and X2 on Precision Brand and GMCPauls stuff! I order the vent window weatherstripping from Classic Parts because of this: http://67-72chevytrucks.com/vboard/s...=660294&page=2

03-13-2017, 03:08 PM	#4
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,854	Re: Door window weatherstripping kit Precision is what I sell and use. The hang up issue may be regulator but also may be the vent window and/or the rear window channel run seal, they deteriorate and "gum up" the channels. __________________ 1967 C10 SWB Owner - Rustbelt Restorations

03-13-2017, 03:51 PM	#5
jgr Registered User Join Date: Apr 2016 Location: saginaw Mi. Posts: 70	Re: Door window weatherstripping kit Who sells Precision Brand?

03-13-2017, 05:37 PM	#9
samkost Senior Member Join Date: Sep 2014 Location: Lake Tapps, Wa. Posts: 607	Re: Door window weatherstripping kit I also recommend Precision brand rubber. I am using Precision products (Doors, Cab, Windshield and Back Glass) that I purchased from Wes at Classic Heartbeat. http://www.classicheartbeat.com He has dealt with Precision to reproduce the best quality aftermarket rubber products for our trucks. Give him a call, he will answer all your questions.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.