The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-18-2012, 12:15 AM   #1
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
67' C10 Build V8 Conversion & 700r4 trans



I am starting the build/conversion of my 67',

From: a 250ci I6 engine & three speed Manual trans.
To: 350ci V8, Vortec Heads, among other parts

Along the way i will be upgrading and converting various systems that will be needed to make this conversion into a balanced vehicle, that could be a daily driver.
I will be lowering the truck and changing to different rims/tires.

Here are a few pictures As it looked Last week
Attached Images
   
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,

Last edited by westgl; 01-18-2012 at 12:32 AM.
westgl is offline   Reply With Quote
Old 01-18-2012, 12:18 AM   #2
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

Those were the before Pic's

Here are some Before pictures also, But with the Shell Off, these were taken today, she is in the shop, waiting for part's that were ordered Yesterday to start trickling in.

Sorry But these pictures are at night, under shop light's and a roll up door was blocking some of the lights so they may be Dark in certain ares of the picture

I still have not washed this truck in over 2 Years.

I did not think that the shell weighed that much, but i drove the truck with the shell off and it seemed much lighter, and it moved better.

Cant wait to double my H.P. & torque
Attached Images
     
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,

Last edited by westgl; 01-18-2012 at 12:37 AM.
westgl is offline   Reply With Quote
Old 01-18-2012, 12:22 AM   #3
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

Here is the intake Manifold & Valve Covers that I was thinking of using
Attached Images
 
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,
westgl is offline   Reply With Quote
Old 01-18-2012, 12:23 AM   #4
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

Well maybe i leave that as wall art in the shop

That came off of a 58' Corvette that i have, you can see the accelerator pedal on the wall too
Attached Images
 
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,
westgl is offline   Reply With Quote
Old 01-18-2012, 12:27 AM   #5
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

Here is a the Engine.
Attached Images
   
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,
westgl is offline   Reply With Quote
Old 01-18-2012, 12:35 AM   #6
Constructor1
Registered User
 
Join Date: Jan 2011
Location: Phoenix, AZ
Posts: 89
Re: 67' C10 Build V8 Conversion & 700r4 trans

Looks like you have a great project going. I really like those valve covers. Keep us posted on your progress and remember lots of pics.

What kind of bender is that next to your compressor? Do you use it for much? I have a Hossfeld Bender that is collecting dust - wish I could utilize it more.
Constructor1 is offline   Reply With Quote
Old 01-18-2012, 12:40 AM   #7
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

Cleaned the shop today to get it ready for the fun to begin.

I guess i could start tearing the front end off for access
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,
westgl is offline   Reply With Quote
Old 01-18-2012, 12:55 AM   #8
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

That bender is really nice, I have only played with it, i also bought a tube notcher at the same time.

I am going to build Two Hot rod frame's, after the truck Build.
I also have a 29' T-bucket, steel body & the 58' Vette.

The Hot rods I am going to build, First one will have a very short frame, with a Chevy 250 h.p. 4.3L v6, Radiator in the rear, I have a 72' Complete Corvette IRS.
Key is Short and Light. Narrowed Corvette rear and front suspension. Weight Goal on this is 1500-lbs or less, frame tubes will also be doing double duty as the cooling tube for the rear Radiator

Both will be open Hot Rods

Other hot rod is same concept short and light using a two wheels in front probably either 195-205, and one 275 single rear tire shaft drive, 130 -140h.p. 6 speed trans about 1100lbs, power to weight ratio should be excellent. throttle steer/drift should be easily done

If i have time i may take a picture of that engine trans setup.

If i can remember to i will get a few pics of under the hood for the before pictures
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,

Last edited by westgl; 01-18-2012 at 01:13 AM.
westgl is offline   Reply With Quote
Old 01-18-2012, 05:33 PM   #9
67cheby
67cheby

 
67cheby's Avatar
 
Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,877
Re: 67' C10 Build V8 Conversion & 700r4 trans

great build started , i will watch
67cheby is offline   Reply With Quote
Old 01-18-2012, 08:02 PM   #10
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

Took some more,

Before pics, of Engine Compartment. (Engine room we need more power captain, BS you better start pedaling there aint no moe).

Stock I6 250ci 140-155h.p. Head was rebuilt two years ago.

Engine runs really good, and has decent power now that that heavy Shell is off her back, stops better too.
Attached Images
     
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,
westgl is offline   Reply With Quote
Old 01-18-2012, 08:06 PM   #11
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

Centerline Wheels has their sales.

I just ordered some Forged Billet Wheels from Centerline Wheels, NICE!!!
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,
westgl is offline   Reply With Quote
Old 01-18-2012, 08:08 PM   #12
67c10rustbuket
Registered User
 
67c10rustbuket's Avatar
 
Join Date: Apr 2011
Location: Mustang, Oklahoma
Posts: 2,806
Re: 67' C10 Build V8 Conversion & 700r4 trans

Man thats one clean looking body! and one awesome new engine, I like it.

are those hood pins ?
__________________
Dan <---(my name)



67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car
67c10rustbuket is offline   Reply With Quote
Old 01-18-2012, 08:11 PM   #13
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

They are hood Locks, that lock the hood to the frame
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,
westgl is offline   Reply With Quote
Old 01-18-2012, 08:21 PM   #14
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

I debating on whether to leave the engine painted Silver,

or paint the engine Chevy Engine Red-Orange.

I wanted it to be a little different, but there is something about those red-orange engines that make my blood boil.
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,
westgl is offline   Reply With Quote
Old 01-18-2012, 08:50 PM   #15
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

Here are a few engine pics of the 130-140 h.p. & 130 lbs /ft or torque. power to weight ratio is less than 8 lbs per H.P. Low seat, light weight, narrow, and short.

You dont get a sense of the size of the engine fuel injected, 1800cc, 109c.i. 4.4" bore/Piston (bigger pistons than a 454ci), 5 Speed manual Trans. they claim, it is the largest bore of any Gasoline production Car or motorcycle. It is a very torquey engine with a 7,500 rpm, red line. 4 large valves per cylinder. This engine actually has Two oil pumps.

All in a light weight package.

I bought the crashed bike at auction bike was only a few months old less than 1,800 miles on it.
Attached Images
  
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,

Last edited by westgl; 01-18-2012 at 09:07 PM.
westgl is offline   Reply With Quote
Old 01-18-2012, 09:10 PM   #16
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

sorry for steering off coarse, a couple goldwing converted to Naked bikes, gone are the saddle bags and trunk and Fairing/winshield they are also very short and about 400lbs lighter.

The trike has a Narrowed, 2006 mustang GT 8.8" rear end, w/disc brakes 3.08 gears posi., That is driveable but need to build the body and finish some of the electrical routing, horns lights, after the body build.
That trike is also a 1800 cc but it is a 6 cylinder and about 115h.p. with 110 lbs ft of torque, twin carbs.

Those are just the project in the shop, I also have a low mile, 2006 Toyota 4runner V6 complete drive train, engine,trans rear end drive shaft, and complete electrical, as another project

Ok no more talk about other projects.

back to trucks
Attached Images
     
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,

Last edited by westgl; 01-18-2012 at 09:23 PM.
westgl is offline   Reply With Quote
Old 01-18-2012, 09:45 PM   #17
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

Hey thanks for the comps, but i have not washed that truck in 2 years,

So, it's not that clean, but yeah, i think it will make a nice one.

That truck was owned by a little old guy, and that truck was his pride and joy.
He really took very good care of it, Garaged always, he was the original owner.

He died and i bought it from his brother, that was selling his stuff.

It had 112,000 original miles when i bought it.

It was converted to a internal volt reg. alternator, Looks like the radiator was replaced with a 4 row that has a Trans cooler in it, even though truck is a manual trans.
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,
westgl is offline   Reply With Quote
Old 01-19-2012, 11:34 PM   #18
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

I think i found the wheels I want to use. 17x8 Front, 17x9-1/2 Rear
Attached Images
File Type: pdf Centerline Wheels Compress.pdf (95.4 KB, 156 views)
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,
westgl is offline   Reply With Quote
Old 01-19-2012, 11:46 PM   #19
67c10rustbuket
Registered User
 
67c10rustbuket's Avatar
 
Join Date: Apr 2011
Location: Mustang, Oklahoma
Posts: 2,806
Re: 67' C10 Build V8 Conversion & 700r4 trans

Thats a nice looking wheel, looks similar to mine. those will looks great on your truck. So is this going to get the short bed treatment ? air bagged ? I like the silver painted engine, never seen one painted silver before, looks clean.
__________________
Dan <---(my name)



67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car
67c10rustbuket is offline   Reply With Quote
Old 01-20-2012, 12:02 AM   #20
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

Well after 2- years i finally wash the darn truck, I didn't get any pics as it was dark and cloudy out, But color is more vibrant and shiny than it was.

It cleaned up very nice and looks much better.

I have been cleaning my shop getting the last few projects cleared out of the way.

I received a UPS Label confirmation that My parts are shipping tomorrow.

I should have them by Monday.

I am going to start taking the 67' apart tomorrow.

The short term Plan;

Pull front end Sheet metal off fenders, inner fenders, Hood, Cowl Cover, Radiator Mount, By Sunday

Get Old Engine and Trans Pulled out of vehicle by Tuesday.

Remove Front Suspension, Clean & ready for primer/paint, by Sunday.

End week one;

Wire brush Frame from Front to Firewall, and ready for Primer/paint by Wednesday
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,
westgl is offline   Reply With Quote
Old 01-20-2012, 12:20 AM   #21
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

I think i may leave it as a Long bed.

No air Bags

I will do a 3.5x5" drop

Front Disks

Front 1-1/4" Sway bar

Power brakes

Power Steering

Rebuild Front Suspension

Rebuild Rear suspension

Weld strap/plates on Rear Trailing arms

among other things

I have a lot of parts coming.

I will be using it as a truck, and i would like to have the 8 ft bed.

I do like the look of the longer bed.

But anything can happen during a build, we will have to wait and see.
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,

Last edited by westgl; 01-20-2012 at 12:27 AM.
westgl is offline   Reply With Quote
Old 01-20-2012, 05:45 PM   #22
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

I started working on the 67' today, this is how far i got until i hit a snag that stopped me.

Damn Windshield wipers, I cannot get them off

Help?
Attached Images
  
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,

Last edited by westgl; 01-20-2012 at 05:52 PM.
westgl is offline   Reply With Quote
Old 01-20-2012, 05:48 PM   #23
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

I have the front radiator cowl loose and waiting to get the fenders loosened up.

But i cannot get the windshield wipers off the firewall cover below the windshield wiper is loose and ready but i cannot get the windshield wipers off

Crap!!


Help! anyone know these come off?
Attached Images
  
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,
westgl is offline   Reply With Quote
Old 01-20-2012, 11:11 PM   #24
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

I was able to find a thread on how the windshield wipers are removed.

But they were a real pain in the Bleep!!

PO had painted the splined nut and then put on the windshield wiper so they were glued on with the paint.

I got them wipers off and removed the top firewall cover & the front Fenders too.
I did what i wanted too + some.

Not Bad for the first day.

I would like to get the engine & trans pulled next, maybe I'll have them out by Sunday
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,

Last edited by westgl; 01-20-2012 at 11:37 PM.
westgl is offline   Reply With Quote
Old 01-21-2012, 11:48 PM   #25
westgl
Registered User
 
westgl's Avatar
 
Join Date: Oct 2009
Location: Central Point, Oregon
Posts: 166
Re: 67' C10 Build V8 Conversion & 700r4 trans

Second Day,

Motor mounts are loose, and I disconnected all life support from the old engine.

All wiring is tagged and out of the way.

here are a few pics

Looks like I may have to rent a pickle fork to get the steering components apart.
Attached Images
   
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,
westgl is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:53 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com