Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jmedero · 12-02-2012, 12:01 AM

I'm in....
Posted via Mobile Device

2002yanks · 12-03-2012, 12:48 AM

cant wait to see what you come up with for it.

Mad Rods · 12-03-2012, 01:40 AM

im scribed!

**67cheby** · 12-03-2012, 10:28 AM

Thanks guys, well i got the interior pretty much gutted this week....found a little rust , couple small parts right at the very back of the tub by the gate then on each side of the riser where the floor steps up behind the front seats and then when i pulled the rubber off from around the drivers rocker a couple spots of that lip are gone so i guess i will replace the drivers rocker panel and seeing that there is no seams i am going have to look and see what you guys have found is the best way to replace these ! I also cleaned up the transmission and transfer case to put it on Craigslist

**LEEVON** · 12-03-2012, 10:44 AM

Was there a pack of wild dogs living in there??!!

**67cheby** · 12-03-2012, 11:00 AM

LOL...it looks like it ! it was NASTY ! the transmission and transfer case was in the back and of course the carpet and everything was soaked with trans fluid !

jlsanborn · 12-03-2012, 11:45 AM

Yummy! Did you find any quarters in there? Every little bit helps

**67cheby** · 12-03-2012, 11:51 AM

not one !! LOL, they must have cleaned it out !

**67cheby** · 12-03-2012, 11:54 AM

posted up all of the parts that are coming off on the parts board http://67-72chevytrucks.com/vboard/s...d.php?t=554613

aggie91 · 12-03-2012, 01:17 PM

I tuned in REAL late on Cloud9. It has only be 3 days since you started this and it is already 5 pages and 109 posts.

Looking forward to this one. I have always liked the Blazers.

I got a picture of a blazer interior that was laid out that reminded me of the interior in Cloud9 just a different color. When I can get it downloaded I will post it up....

**67cheby** · 12-03-2012, 01:30 PM

looking forward to seeing it , thanks man !

72BlckButy · 12-03-2012, 02:40 PM

Nice progress this weekend Mike.

aggie91 · 12-03-2012, 03:06 PM

Here it is. It was a '75 ish Blazer laid out on Coys. It needed paint but was cool...

I did not get a picture of the whole truck for some reason...

**67cheby** · 12-03-2012, 03:20 PM

sweet , i need to see some more pics of what they did in the back with the seat ! Do you have any other pics ?

**LEEVON** · 12-03-2012, 03:33 PM

It's blocked up (see pic) and moved forward for sure. I wonder how small of a notch you can get away with?

Remember the rear-facing station wagon seats?...that would be cool!

truckzilla · 12-03-2012, 04:09 PM

Quote:

Originally Posted by 67cheby

And now ...on another note ! I recieved an UNBELIEVABLE call from a company last night , that i will share with you next week as soon as we have all of the details wrapped up !!! I AM EXTREMELY EXCITED !

Hey Mike, when are you going to announce who the mystery sponsor is? Either that, or I'm guessing that someone is going to do a reality show on you while you do your Blazer! I know I'd sure as heck watch!

truckzilla · 12-03-2012, 04:10 PM

Quote:

Originally Posted by aggie91

Here it is. It was a '75 ish Blazer laid out on Coys. It needed paint but was cool...

I did not get a picture of the whole truck for some reason...

Plaidzilla!

**Dieselwrencher** · 12-03-2012, 04:30 PM

Nice score and sweet project Mike. I have a couple of ideas for you since I see you're going the different and modified look here. On the hood, the 73-80 has a more square body line in the center of it where as the 81-87 comes up to a point. You were saying you wanted to retain the cowl panel seperate from the hood. Now, when you cut the 2 hoods to do this the sheet metal won't want to line up. But, I think you could weld the 2 hoods together and get a steel cowl scoop and then use it as a seam blocker and add looks.

On the rear seat: Place the lower cusion smack on the floor even with your new floor hump. Use the top of the floor hump as half of the lower portion of the seat frame and then add a back to it. This way you might try to still keep it as low as you can without kiddos wacking their heads as much.

**67cheby** · 12-03-2012, 04:45 PM

Quote:

Originally Posted by 67cheby

sweet , i need to see some more pics of what they did in the back with the seat ! Do you have any other pics ?

Quote:

Originally Posted by LEEVON

It's blocked up (see pic) and moved forward for sure. I wonder how small of a notch you can get away with?
i am going to make it as small as possible, you are right i see the blocks but why blocks ? that would lift it ?
Remember the rear-facing station wagon seats?...that would be cool!

lOL

Quote:

Originally Posted by truckzilla

Hey Mike, when are you going to announce who the mystery sponsor is? Either that, or I'm guessing that someone is going to do a reality show on you while you do your Blazer! I know I'd sure as heck watch!

Probably Friday, LOL a reality show would be great...carsalesman by day car builder by night !

Quote:

Originally Posted by Dieselwrencher

Nice score and sweet project Mike. I have a couple of ideas for you since I see you're going the different and modified look here. On the hood, the 73-80 has a more square body line in the center of it where as the 81-87 comes up to a point. You were saying you wanted to retain the cowl panel seperate from the hood. Now, when you cut the 2 hoods to do this the sheet metal won't want to line up. But, I think you could weld the 2 hoods together and get a steel cowl scoop and then use it as a seam blocker and add looks.

On the rear seat: Place the lower cusion smack on the floor even with your new floor hump. Use the top of the floor hump as half of the lower portion of the seat frame and then add a back to it. This way you might try to still keep it as low as you can without kiddos wacking their heads as much.

great ideas !

Rusbuilt · 12-04-2012, 02:39 PM

Awesome Mike I'm gonna keep tabs on this build!

**67cheby** · 12-04-2012, 02:58 PM

Thanks man, should be some real progress starting very soon !

aggie91 · 12-04-2012, 03:06 PM

That's the only picture I have of it. Sorry...
Posted via Mobile Device

67cheby'sGirl · 12-04-2012, 03:28 PM

.... just thought I'd come meet everyone that my husband is in an "online relationship" with...

**67cheby** · 12-04-2012, 03:35 PM

LOL...arent you the funny one !

**67cheby** · 12-04-2012, 03:45 PM

can i get a moderator to help put my wifes build thread link at the bottom of her posts ?

12-02-2012, 12:01 AM	#101
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy I'm in.... Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

12-03-2012, 12:48 AM	#102
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy cant wait to see what you come up with for it. __________________ My build thread!! http://67-72chevytrucks.com/vboard/s...d.php?t=474018

12-03-2012, 01:40 AM	#103
Mad Rods Chevy Only Tx Join Date: May 2009 Location: Pecos,Tx Posts: 1,061	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy im scribed! __________________ Chevy Only Tx.........

12-03-2012, 10:28 AM	#104
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Thanks guys, well i got the interior pretty much gutted this week....found a little rust , couple small parts right at the very back of the tub by the gate then on each side of the riser where the floor steps up behind the front seats and then when i pulled the rubber off from around the drivers rocker a couple spots of that lip are gone so i guess i will replace the drivers rocker panel and seeing that there is no seams i am going have to look and see what you guys have found is the best way to replace these ! I also cleaned up the transmission and transfer case to put it on Craigslist Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-03-2012, 10:44 AM	#105
LEEVON Registered User Join Date: Jul 2006 Location: Ozark, MO Posts: 4,887	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Was there a pack of wild dogs living in there??!! __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

12-03-2012, 11:00 AM	#106
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy LOL...it looks like it ! it was NASTY ! the transmission and transfer case was in the back and of course the carpet and everything was soaked with trans fluid ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-03-2012, 11:45 AM	#107
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,367	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Yummy! Did you find any quarters in there? Every little bit helps __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

12-03-2012, 11:51 AM	#108
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy not one !! LOL, they must have cleaned it out ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-03-2012, 11:54 AM	#109
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy posted up all of the parts that are coming off on the parts board http://67-72chevytrucks.com/vboard/s...d.php?t=554613 __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-03-2012, 01:17 PM	#110
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy I tuned in REAL late on Cloud9. It has only be 3 days since you started this and it is already 5 pages and 109 posts. Looking forward to this one. I have always liked the Blazers. I got a picture of a blazer interior that was laid out that reminded me of the interior in Cloud9 just a different color. When I can get it downloaded I will post it up.... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square Last edited by aggie91; 12-03-2012 at 01:18 PM. Reason: last note added...

12-03-2012, 01:30 PM	#111
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy looking forward to seeing it , thanks man ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-03-2012, 02:40 PM	#112
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Nice progress this weekend Mike. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

12-03-2012, 03:06 PM	#113
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Here it is. It was a '75 ish Blazer laid out on Coys. It needed paint but was cool... I did not get a picture of the whole truck for some reason... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

12-03-2012, 03:20 PM	#114
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy sweet , i need to see some more pics of what they did in the back with the seat ! Do you have any other pics ? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-03-2012, 03:33 PM	#115
LEEVON Registered User Join Date: Jul 2006 Location: Ozark, MO Posts: 4,887	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy It's blocked up (see pic) and moved forward for sure. I wonder how small of a notch you can get away with? Remember the rear-facing station wagon seats?...that would be cool! __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids



Register or Log In To remove these advertisements.

12-03-2012, 04:30 PM	#118
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,133	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Nice score and sweet project Mike. I have a couple of ideas for you since I see you're going the different and modified look here. On the hood, the 73-80 has a more square body line in the center of it where as the 81-87 comes up to a point. You were saying you wanted to retain the cowl panel seperate from the hood. Now, when you cut the 2 hoods to do this the sheet metal won't want to line up. But, I think you could weld the 2 hoods together and get a steel cowl scoop and then use it as a seam blocker and add looks. On the rear seat: Place the lower cusion smack on the floor even with your new floor hump. Use the top of the floor hump as half of the lower portion of the seat frame and then add a back to it. This way you might try to still keep it as low as you can without kiddos wacking their heads as much. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

12-04-2012, 02:39 PM	#120
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Awesome Mike I'm gonna keep tabs on this build! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

12-04-2012, 02:58 PM	#121
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Thanks man, should be some real progress starting very soon ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-04-2012, 03:06 PM	#122
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy That's the only picture I have of it. Sorry... Posted via Mobile Device __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

12-04-2012, 03:28 PM	#123
67cheby'sGirl Registered User Join Date: Dec 2012 Location: Siloam Springs AR Posts: 32	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy .... just thought I'd come meet everyone that my husband is in an "online relationship" with...

12-04-2012, 03:35 PM	#124
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy LOL...arent you the funny one ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-04-2012, 03:45 PM	#125
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy can i get a moderator to help put my wifes build thread link at the bottom of her posts ? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172 Last edited by 67cheby; 12-04-2012 at 04:24 PM.

Register or Log In To remove these advertisements.