The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-16-2018, 03:36 PM   #101
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,773
Re: Starting a 52 Chevy 3100 Project.

have you done a "tire on and suspension at full compression" turning test to ensure the rubber doesn't tear a fender off when turned all the way and the suspension bottoms? with the spacers the tires do more of a sweep during a turn so they may get closer to the wheel openings than you may realize. it would suck to find that out too late.
I am sure you have done the research and found the video on scrub radius, tire size and wheel offset issues and steering included angle etc. your truck, do it like you want. as long as it is safe to drive on the same roads as the rest of us and our kids.
dsraven is offline   Reply With Quote
Old 10-16-2018, 04:55 PM   #102
28TudorAZ
Registered User
 
28TudorAZ's Avatar
 
Join Date: May 2018
Location: Phoenix, AZ
Posts: 314
Re: Starting a 52 Chevy 3100 Project.

Quote:
Originally Posted by dsraven View Post
have you done a "tire on and suspension at full compression" turning test to ensure the rubber doesn't tear a fender off when turned all the way and the suspension bottoms? with the spacers the tires do more of a sweep during a turn so they may get closer to the wheel openings than you may realize.
Considering I just put them on there 3 days ago and the cab and front end are still off what do you think? I guess I will see when it actually runs and drives and adjust accordingly.

Last edited by 28TudorAZ; 10-16-2018 at 05:06 PM.
28TudorAZ is offline   Reply With Quote
Old 10-16-2018, 05:58 PM   #103
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,773
Re: Starting a 52 Chevy 3100 Project.

oh hey, sorry man.
bye bye
dsraven is offline   Reply With Quote
Old 10-17-2018, 03:28 AM   #104
MiraclePieCo
Registered User
 
MiraclePieCo's Avatar
 
Join Date: Sep 2014
Location: USA
Posts: 2,249
Re: Starting a 52 Chevy 3100 Project.

Quote:
Originally Posted by 28TudorAZ View Post
Exactly. Everyone has heard. I researched it quite a bit and never found anyone who actually had the issue.
Awesome, lol - opinions are plentiful, experience is rare!
__________________
1951 Chevy Panel Truck
MiraclePieCo is offline   Reply With Quote
Old 10-17-2018, 11:08 AM   #105
mikebte
Registered User
 
Join Date: Oct 2011
Location: Tucson, AZ
Posts: 639
Re: Starting a 52 Chevy 3100 Project.

Quote:
Originally Posted by 28TudorAZ View Post
Exactly. Everyone has heard. I researched it quite a bit and never found anyone who actually had the issue..
Crazy the stuff people make up. Porsche used wheel spacers from the factory on the 928 and it would run 170MPH. I think if used correctly you will have no issues. Correctly being the key word.

I remember 10 years ago I was telling people how an electric fan was better than a mechanical fan. You would think I was taking ways peoples kids, they would tell me how wrong I was and it was a phase. Now look. Most people speak hear say and not facts.

Keep up the good work, enjoying you build
mikebte is offline   Reply With Quote
Old 10-18-2018, 04:15 AM   #106
Jesse Z
Account Suspended
 
Join Date: Aug 2016
Location: Florida, USA
Posts: 290
Re: Starting a 52 Chevy 3100 Project.

Quote:
Originally Posted by mikebte View Post
Crazy the stuff people make up. Porsche used wheel spacers from the factory on the 928 and it would run 170MPH.
I remember 10 years ago I was telling people how an electric fan was better than a mechanical fan. You would think I was taking ways peoples kids, they would tell me how wrong I was and it was a phase. Now look. Most people speak hear say and not facts.

Their opinions are typically given with dire warnings about you killing busloads of orphans and not being on the same highway with their family, lol!

Enough digression: back to the build thread please!
Jesse Z is offline   Reply With Quote
Old 10-20-2018, 12:53 AM   #107
GreasyLikeaBurger
Registered User
 
GreasyLikeaBurger's Avatar
 
Join Date: Oct 2015
Location: Costa Mesa, CA
Posts: 190
Re: Starting a 52 Chevy 3100 Project.

Quote:
Originally Posted by mikebte View Post
Crazy the stuff people make up. Porsche used wheel spacers from the factory on the 928 and it would run 170MPH. I think if used correctly you will have no issues. Correctly being the key word.

I remember 10 years ago I was telling people how an electric fan was better than a mechanical fan. You would think I was taking ways peoples kids, they would tell me how wrong I was and it was a phase. Now look. Most people speak hear say and not facts.

Keep up the good work, enjoying you build
Well I actually work for Porsche as a tech, 10-15mm spacers are nothing to bump out a wheel for fitment. But when you increase that to 3+inches, you are changing the geometry of the front end.
GreasyLikeaBurger is offline   Reply With Quote
Old 10-23-2018, 12:51 AM   #108
28TudorAZ
Registered User
 
28TudorAZ's Avatar
 
Join Date: May 2018
Location: Phoenix, AZ
Posts: 314
Re: Starting a 52 Chevy 3100 Project.

So I got the cab back on over the weekend and welded up the firewall holes and bolted it up. Also today I had the day off and put the 2" lowering blocks on the back axle and welded up a bunch of holes on the inside and old fuel filler hole. I also ordered a steering column, steering shaft, steering joints, transmission cooler, a 16 inch fan and a pedal assembly today. This should keep me busy for a while. Not that I don't have anything to do but I like to skip around so I don't get frustrated or bored. Plus I can't put the front end back on till all of this is on there.
Attached Images
  

Last edited by 28TudorAZ; 10-25-2018 at 07:42 PM.
28TudorAZ is offline   Reply With Quote
Old 10-25-2018, 07:34 PM   #109
28TudorAZ
Registered User
 
28TudorAZ's Avatar
 
Join Date: May 2018
Location: Phoenix, AZ
Posts: 314
Re: Starting a 52 Chevy 3100 Project.

Finally got the dash ready for paint.
Attached Images
 
28TudorAZ is offline   Reply With Quote
Old 10-25-2018, 07:48 PM   #110
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,746
Re: Starting a 52 Chevy 3100 Project.

looks great!
__________________
the mass of men live lives of quiet desperation


if there is a problem, I can have it.

new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393
joedoh is offline   Reply With Quote
Old 10-28-2018, 12:50 AM   #111
28TudorAZ
Registered User
 
28TudorAZ's Avatar
 
Join Date: May 2018
Location: Phoenix, AZ
Posts: 314
Re: Starting a 52 Chevy 3100 Project.

Built the brackets for the radiator support, fan brackets and mounted the transmission cooler today.
Attached Images
  
28TudorAZ is offline   Reply With Quote
Old 11-03-2018, 06:43 AM   #112
54ChevyLs
Registered User
 
54ChevyLs's Avatar
 
Join Date: Jul 2018
Location: Oaks, Pennsylvania
Posts: 138
Re: Starting a 52 Chevy 3100 Project.

Your doing some excellent work! Keep it up!
54ChevyLs is offline   Reply With Quote
Old 11-03-2018, 09:44 PM   #113
28TudorAZ
Registered User
 
28TudorAZ's Avatar
 
Join Date: May 2018
Location: Phoenix, AZ
Posts: 314
Re: Starting a 52 Chevy 3100 Project.

Quote:
Originally Posted by 54ChevyLs View Post
Your doing some excellent work! Keep it up!
Thanks. Got the steering column mount made up.
Attached Images
 
28TudorAZ is offline   Reply With Quote
Old 11-04-2018, 08:36 AM   #114
8man
Senior Member
 
Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,258
Re: Starting a 52 Chevy 3100 Project.

Nice looking dash, good work on the vents.

I got the same steering column installed with my buddy in the 48.
__________________
8man-aka Robert
1948 on a S10 Frame, small block with a carb
1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD
Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL]
[/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204
8man is offline   Reply With Quote
Old 11-04-2018, 05:32 PM   #115
28TudorAZ
Registered User
 
28TudorAZ's Avatar
 
Join Date: May 2018
Location: Phoenix, AZ
Posts: 314
Re: Starting a 52 Chevy 3100 Project.

Got the power booster and pedal assembly put in. If you don't use the s10 pedal setup you can cut the end of the brake rod and tap it to use with aftermarket pedal assembly.
Attached Images
  
28TudorAZ is offline   Reply With Quote
Old 11-04-2018, 10:00 PM   #116
mikebte
Registered User
 
Join Date: Oct 2011
Location: Tucson, AZ
Posts: 639
Re: Starting a 52 Chevy 3100 Project.

Quote:
Originally Posted by 28TudorAZ View Post
Got the power booster and pedal assembly put in. If you don't use the s10 pedal setup you can cut the end of the brake rod and tap it to use with aftermarket pedal assembly.
That's looking great! Keep it up
mikebte is offline   Reply With Quote
Old 11-06-2018, 07:53 PM   #117
28TudorAZ
Registered User
 
28TudorAZ's Avatar
 
Join Date: May 2018
Location: Phoenix, AZ
Posts: 314
Re: Starting a 52 Chevy 3100 Project.

Quote:
Originally Posted by mikebte View Post
That's looking great! Keep it up

Thanks. Got the brake lines cut and took them to a shop last night and got them crimped. Bolted them on late last night. Put some fluid in and we have a pedal. Still need to properly bleed. Probably the first time in 25 years the truck had working brakes.
Attached Images
 
28TudorAZ is offline   Reply With Quote
Old 11-06-2018, 07:59 PM   #118
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,746
Re: Starting a 52 Chevy 3100 Project.

working brakes are a good thing! great progress!
__________________
the mass of men live lives of quiet desperation


if there is a problem, I can have it.

new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393
joedoh is offline   Reply With Quote
Old 11-07-2018, 12:20 AM   #119
mikebte
Registered User
 
Join Date: Oct 2011
Location: Tucson, AZ
Posts: 639
Re: Starting a 52 Chevy 3100 Project.

Very nice, hope you make it down to Tucson in that rig. I would love to have a look once it's running.
mikebte is offline   Reply With Quote
Old 11-07-2018, 06:41 PM   #120
28TudorAZ
Registered User
 
28TudorAZ's Avatar
 
Join Date: May 2018
Location: Phoenix, AZ
Posts: 314
Re: Starting a 52 Chevy 3100 Project.

Ok picked this up at a junkyard. I think I need another inch. Any thoughts? The yoke seems pretty short.
Attached Images
 
28TudorAZ is offline   Reply With Quote
Old 11-07-2018, 09:33 PM   #121
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,746
Re: Starting a 52 Chevy 3100 Project.

is the truck on the ground? the way the leafs lean forward on an s10 means the driveshaft will move into the trans when you lower it.

if the truck is on the ground, I would say you need a little more. I have had good luck with reg cab shortbed driveshafts, I think they are around 53", I used a trailblazer shaft on one and it was just a hair too short, I think it was 51.5"
__________________
the mass of men live lives of quiet desperation


if there is a problem, I can have it.

new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393
joedoh is offline   Reply With Quote
Old 11-07-2018, 09:48 PM   #122
mikebte
Registered User
 
Join Date: Oct 2011
Location: Tucson, AZ
Posts: 639
Re: Starting a 52 Chevy 3100 Project.

Agreed, I spent some time at the junk yard but finally found a 53” for mine. It was out of a 2wd blazer and worked great. Blazers have verying lengths as well as the trailblazer.
mikebte is offline   Reply With Quote
Old 11-07-2018, 10:28 PM   #123
28TudorAZ
Registered User
 
28TudorAZ's Avatar
 
Join Date: May 2018
Location: Phoenix, AZ
Posts: 314
Re: Starting a 52 Chevy 3100 Project.

It's on the ground. Its from a short bed s10. I guess I need 54.
28TudorAZ is offline   Reply With Quote
Old 11-07-2018, 11:09 PM   #124
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,746
Re: Starting a 52 Chevy 3100 Project.

well thats terrible, especially since my advice to use a rcsb driveshaft led you there.

but I think your tall valve cover is the culprit. I tuck my motor way back against the firewall as far as it can go, but I use the stock (low) valve cover. with a tall valve cover, the motor cant go back as far.
__________________
the mass of men live lives of quiet desperation


if there is a problem, I can have it.

new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393
joedoh is offline   Reply With Quote
Old 11-08-2018, 12:55 AM   #125
28TudorAZ
Registered User
 
28TudorAZ's Avatar
 
Join Date: May 2018
Location: Phoenix, AZ
Posts: 314
Re: Starting a 52 Chevy 3100 Project.

Quote:
Originally Posted by joedoh View Post
well thats terrible, especially since my advice to use a rcsb driveshaft led you there.

but I think your tall valve cover is the culprit. I tuck my motor way back against the firewall as far as it can go, but I use the stock (low) valve cover. with a tall valve cover, the motor cant go back as far.
I measured it before I left and it was around 53". I didn't change out the yoke. Maybe its different. Oh well $110 to have someone shorten the old one and its aluminum. It doesn't have tall valve covers. Possibly my cab placement was 1/2 inch difference and then then my motor placement was 1/2 inch difference that would make up the extra inch.
28TudorAZ is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:29 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com