|
02-07-2018, 01:28 PM
|
#1 |
|
Registered User
Join Date: Aug 2009
Location: Preston, ID
Posts: 123
|
Flywheel
Will the flywheel from a 292 fit a 350, and can I use the starter from the six, it looks like it mounts to the bell housing, on the 350.
|
|
|
|
02-07-2018, 09:13 PM
|
#2 |
|
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,709
|
Re: Flywheel
I would guess a 292 is internal balance and uses a zero balance flywheel like the other contemporary Chevy motors. So most likely you can use the flywheel. Probably true with the starter as well but you should test fit because it can make a difference on the diameter of the flywheel which dictates how many teeth are on the starter ring gear.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
|
|
|
|
02-08-2018, 12:11 AM
|
#3 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
|
Re: Flywheel
Yes the 292 flywheel will bolt up to a '68-'85 350. However I believe with 292 flywheel is drilled to accept 1/2" bolts instead of the typical 7/16" bolts used on most other I6 and GEN I small blocks. Yes you can use the same bellhousing mounted starter.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
