project BIG RED (gen3 on air)

[68 short step]

Originally Posted by RaceAGMC

Yet another sweet build. Any chance you have part nuMbers for all the steering hose fittings. I am working on plumbing my steering I also have a Gen III swap in my truck with a factory power steering chassis.
Posted via Mobile Device

you are in luck, i just PMd someone that ezact same question a few days ago...
i make my own lines, i use AN fittings from summit.. the power steering resovior is 16mm x 1.5 o ring earl part # 991955erl..
for the gear box on the truck (assuming it is the stock unit) it is 11/16-18 earl PN 991950erl and 5/8-18 PN 991947erl....those are for a -6AN line, which is the size id recomend

then pending on how you route the lines, you'll need a few 90*, maybe a streight, or ???????.... normally for these style trucks, with the stock inner fenders, i get (in addition to above P/Ns)... Also on all powersteering ftngs id recomend earls brand....the summit brand cant handle the pressure
(1) 90* -6AN
(2) 120* -6AN

[RaceAGMC]

Thanks so much, I happen to have some extra -6 line leftover from plumbing my fuel system, I will order up those fittings and get it all fixed up.
Posted via Mobile Device

[1968gm]

Very cool, keep up the good work!!!

[70onB.A.D.'s]

Great Build man, subscribiing to this one. Any chance any body can stop by and see the progree I am only about 30 min away.

[68 short step]

Originally Posted by 70onB.A.D.'s

Great Build man, subscribiing to this one. Any chance any body can stop by and see the progree I am only about 30 min away.

well, if you come to some of tulsas car show, you may just see it.....
here are some more progress pics.... i ran the wiring for the air managment, and didnt want to have a groumet with all those wires coming in the cab, so i went with a 1/4 lock bulkhead... the connection will be hidden under the seat, and should the cab need to come off, its a simple twist to seperate the wiring going into the cab...

[trashmanryan]

68 short step, I've looked through all your builds. Awesome work man!
Posted via Mobile Device

[67cheby]

That is to cool , where are they from ?
Posted via Mobile Device

[gringoloco]

Looks like aircraft parts. Cool!

[68 short step]

Originally Posted by gringoloco

Looks like aircraft parts. Cool!

yelp they are... ill have to look at the bag, to see where they came from...

[FRENCHBLUE72]

Mcmaster car has those connections as does d.i.yautomotive..