52 short box bed mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dirtywelder · 09-23-2018, 10:19 PM

Does anyone make a kit to not have to use the wood block to bolt down the bed to the frame?

MARTINSR · 09-23-2018, 11:58 PM

Yep, Filling station. I was just looking at it in the catalog this morning.

Here you go. https://www.fillingstation.com/shop/...&searchtype=FT

Brian

mr48chev · 09-24-2018, 01:19 AM

They have a lot of nifty stuff at great prices but don't get in a snit of it takes a lot longer than you think it should for the parts to show up. I ordered a park light lens for my 77 and it took over a week to get. Lens was perfect but a previous owner had installed a left side park light/turn signal housing in the right side of the truck. That whole truck was a cobbled together mess when I got it though.

If you can figure out the heights you need you could weld some up out of square tubing and use a piece of sidewall from a junk tire for the rubber insulator.

MiraclePieCo · 09-24-2018, 03:02 AM

I've seen guys make steel extensions for the body mounts out of square tubing.

MARTINSR · 09-24-2018, 09:41 AM

Filling station was damn good in my first order, had my goodies in a couple of days.

Brian

mr48chev · 09-24-2018, 02:18 PM

It may have just been what I ordered or when I ordered it. Sometimes it is just how the post office, UPS or Fed Ex routes the package during shipping.

Almost all UPS or Fedex packages coming from Cali or Oregon into Central Washington go past my house at 4 am when both the fed ex and UPS trucks roll up the road together. I knew I was on time headed to work when they passed my driveway when I was pulling out to go to work.

**joedoh** · 09-24-2018, 02:53 PM

Quote:

Originally Posted by mr48chev

It may have just been what I ordered or when I ordered it. Sometimes it is just how the post office, UPS or Fed Ex routes the package during shipping.

Almost all UPS or Fedex packages coming from Cali or Oregon into Central Washington go past my house at 4 am when both the fed ex and UPS trucks roll up the road together. I knew I was on time headed to work when they passed my driveway when I was pulling out to go to work.

I have been spoiled with fast shipping so much that when my last order from LMC took 6 days (4 business days) to get, I was a little out of sorts. of course LMC is only 2 1/2 hours away, had I known I would have just driven there and saved the 30 dollars in shipping (gas likely would have been 30 dollars)

GreasyLikeaBurger · 09-26-2018, 12:55 AM

Quote:

Originally Posted by MARTINSR

Yep, Filling station. I was just looking at it in the catalog this morning.

Here you go. https://www.fillingstation.com/shop/...&searchtype=FT

Brian

I have a set of the rubber mounts in my 52, I dont remember where I had ordered them from. Probably 10 years ago or more. I installed them when trying to get my truck out of storage and mounting the bed for the first time in 20 years. I think they are at 2.25 x 2.25in . I can double check. I might actually have a spare or two laying around.

dirtywelder · 09-29-2018, 04:06 PM

Thanks for the info. I didn't want to put together with the wood blocks again. I replaced the 20 years ago. I feel I got my moneys worth but there had to be a better way.

MiraclePieCo · 09-29-2018, 10:16 PM

Quote:

Originally Posted by dirtywelder

Thanks for the info. I didn't want to put together with the wood blocks again. I replaced the 20 years ago. I feel I got my moneys worth but there had to be a better way.

I've disassembled many a Model A that the wooden components outlasted the steel.

09-23-2018, 10:19 PM	#1
dirtywelder Registered User Join Date: Aug 2007 Location: moses lake,wa Posts: 2	52 short box bed mounts Does anyone make a kit to not have to use the wood block to bolt down the bed to the frame?

09-23-2018, 11:58 PM	#2
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,001	Re: 52 short box bed mounts Yep, Filling station. I was just looking at it in the catalog this morning. Here you go. https://www.fillingstation.com/shop/...&searchtype=FT Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

09-24-2018, 01:19 AM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,284	Re: 52 short box bed mounts They have a lot of nifty stuff at great prices but don't get in a snit of it takes a lot longer than you think it should for the parts to show up. I ordered a park light lens for my 77 and it took over a week to get. Lens was perfect but a previous owner had installed a left side park light/turn signal housing in the right side of the truck. That whole truck was a cobbled together mess when I got it though. If you can figure out the heights you need you could weld some up out of square tubing and use a piece of sidewall from a junk tire for the rubber insulator. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

09-24-2018, 03:02 AM	#4
MiraclePieCo Registered User Join Date: Sep 2014 Location: USA Posts: 2,249	Re: 52 short box bed mounts I've seen guys make steel extensions for the body mounts out of square tubing. __________________ 1951 Chevy Panel Truck

09-24-2018, 09:41 AM	#5
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,001	Re: 52 short box bed mounts Filling station was damn good in my first order, had my goodies in a couple of days. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

09-24-2018, 02:18 PM	#6
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,284	Re: 52 short box bed mounts It may have just been what I ordered or when I ordered it. Sometimes it is just how the post office, UPS or Fed Ex routes the package during shipping. Almost all UPS or Fedex packages coming from Cali or Oregon into Central Washington go past my house at 4 am when both the fed ex and UPS trucks roll up the road together. I knew I was on time headed to work when they passed my driveway when I was pulling out to go to work. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

09-29-2018, 04:06 PM	#9
dirtywelder Registered User Join Date: Aug 2007 Location: moses lake,wa Posts: 2	Re: 52 short box bed mounts Thanks for the info. I didn't want to put together with the wood blocks again. I replaced the 20 years ago. I feel I got my moneys worth but there had to be a better way.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.