Feedback on reporduction high humps? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jmh68C10 · 02-04-2018, 05:22 PM

Anyone have first hand expierence with reproductions steel high humps? I dont really like the idea of running a fiberglass one and havent had much luck finding a original. Anyone have good or bad to say about these?
https://www.brotherstrucks.com/67-72...tinfo/HHC6772/

https://cooperrestorations.com/produ...p-trans-cover/

http://www.jegs.com/i/Key-Parts/576/...hoCuyoQAvD_BwE

harpo231 · 02-04-2018, 05:43 PM

I'd get the cheap one,make it fit and carpet it over...

B. W. · 02-04-2018, 07:50 PM

Can't believe Brother's price! They are all using the same stock photo in their ads. Willing to bet they are all from the same supplier.

bill3rail · 02-04-2018, 10:07 PM

Quote:

Originally Posted by B. W.

Can't believe Brother's price! They are all using the same stock photo in their ads. Willing to bet they are all from the same supplier.

Damn! My mama told me, You better shop around.

toolboxchev · 02-05-2018, 04:40 AM

Marketing 101 class now open!

**special-K** · 02-05-2018, 07:58 AM

Quote:

Originally Posted by B. W.

Can't believe Brother's price! They are all using the same stock photo in their ads. Willing to bet they are all from the same supplier.

Yes, by KeyParts. Good old all American capitalism at work here. I have no experience with them. Seems if you really wanted an OEM cover you would find one. Maybe not instantly, like one of these reproductions. If you find one with holes for shifters you don't need, patch the hole up. It gets covered and no one could tell

**KP Jon** · 02-05-2018, 10:48 AM

We made the part and I feel it's very true to the original. We decided to leave it without shifter/transfer case, etc. holes due to the variety of them that were used (We have at least five different style original samples out here)

67ChevyRedneck · 02-05-2018, 10:57 AM

They pop up on the parts forum fairly often, but for $90, I'd get the new one. It's not like a fender that has to fit right. Seam sealer, bolt it down, carpet and it will never be seen again

**Ol Blue K20** · 02-05-2018, 11:21 AM

I didn't know they were being repoped.

B. W. · 02-05-2018, 11:33 AM

Quote:

Originally Posted by KP Jon

We made the part and I feel it's very true to the original. We decided to leave it without shifter/transfer case, etc. holes due to the variety of them that were used (We have at least five different style original samples out here)

Who is "We"?

**KP Jon** · 02-05-2018, 11:38 AM

Quote:

Originally Posted by B. W.

Who is "We"?

Key Parts

**Ol Blue K20** · 02-05-2018, 12:05 PM

I think it's fantastic that hard to find parts are repoped. It's making hoarded stashes like mine less necessary. Have we thought about the towhooks? Hint hint

harpo231 · 02-05-2018, 12:28 PM

Quote:

Originally Posted by Ol Blue K20

I think it's fantastic that hard to find parts are repoped. It's making hoarded stashes like mine less necessary. Have we thought about the towhooks? Hint hint

Lexco and Columbus Mckinnon manufacture tow hooks , they might wanna know about pricey tow hook market !

B. W. · 02-05-2018, 01:59 PM

Thanks! I guess I'm slow, that's what KP stands for!

02-04-2018, 05:22 PM	#1
Jmh68C10 Registered User Join Date: Nov 2016 Location: Richmond Va Posts: 68	Feedback on reporduction high humps? Anyone have first hand expierence with reproductions steel high humps? I dont really like the idea of running a fiberglass one and havent had much luck finding a original. Anyone have good or bad to say about these? https://www.brotherstrucks.com/67-72...tinfo/HHC6772/ https://cooperrestorations.com/produ...p-trans-cover/ http://www.jegs.com/i/Key-Parts/576/...hoCuyoQAvD_BwE __________________ 68 c10- Under construction

02-04-2018, 05:43 PM	#2
harpo231 Registered User Join Date: Nov 2014 Location: Lincoln City DE Posts: 1,292	Re: Feedback on reporduction high humps? I'd get the cheap one,make it fit and carpet it over... __________________ Stan 67 swb BLU MULE posted via flip-fone

02-04-2018, 07:50 PM	#3
B. W. Registered User Join Date: Nov 2014 Location: Bigfork, Montana Posts: 1,137	Re: Feedback on reporduction high humps? Can't believe Brother's price! They are all using the same stock photo in their ads. Willing to bet they are all from the same supplier.

02-05-2018, 04:40 AM	#5
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: Feedback on reporduction high humps? Marketing 101 class now open!

02-05-2018, 10:48 AM	#7
KP Jon Active Member Join Date: Dec 2015 Location: Forest, VA Posts: 152	Re: Feedback on reporduction high humps? We made the part and I feel it's very true to the original. We decided to leave it without shifter/transfer case, etc. holes due to the variety of them that were used (We have at least five different style original samples out here)

02-05-2018, 10:57 AM	#8
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Feedback on reporduction high humps? They pop up on the parts forum fairly often, but for $90, I'd get the new one. It's not like a fender that has to fit right. Seam sealer, bolt it down, carpet and it will never be seen again __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

02-05-2018, 11:21 AM	#9
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: Feedback on reporduction high humps? I didn't know they were being repoped. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

02-05-2018, 12:05 PM	#12
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: Feedback on reporduction high humps? I think it's fantastic that hard to find parts are repoped. It's making hoarded stashes like mine less necessary. Have we thought about the towhooks? Hint hint __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

02-05-2018, 01:59 PM	#14
B. W. Registered User Join Date: Nov 2014 Location: Bigfork, Montana Posts: 1,137	Re: Feedback on reporduction high humps? Thanks! I guess I'm slow, that's what KP stands for!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.