MN Parting out a rusty 70. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 01-20-2014, 05:47 PM

Not alot here but will start with these. I will also add parts as i pull them or if you see something ask and i will price it. Here goes...
Aluminum slot wheels (4) $200 no shipping.
Engine with all pullies and brackets $175. 350 that ran but had a noise in it. Turns by hand and has oil in it. Builder.
Upper door retainers. Driver condition. $30 shipped
Door mechanisims $65 shipped. Pass window mech is a little loose but works fine, and pass latch relay has a broken spring. I think all the little clips and screws are there.
Gauges and knobs. $50 shipped. Looks like a clean unit, bezel is bad. PC looks good.
Lens lot. All decent drivers with a piece missing off the bottom of a tail light lens. $45 shipped.
Visors /arm rest lot. $70 shipped. One arm rest is dirty with a small split. Visors and clips look good. Mirror has typical hazing around the edges.
Seat belts. $40 shipped. Work fine, one boot is broken up. You get the floor pieces still bolted to the outers.

These pieces are off a 44 year old truck. Ask if you see anything else.

**too much stuff** · 01-20-2014, 05:51 PM

Pics of the low rider...

**too much stuff** · 01-20-2014, 05:55 PM

And more pics...

**too much stuff** · 01-20-2014, 05:58 PM

Was a nice truck in its day. (glove box door not for sale)

Kennuck · 01-20-2014, 06:37 PM

I will take the gauges and knobs.
Thanks
Ken
48060

kaphillips · 01-20-2014, 06:54 PM

I am interested in the wood bed cross sill braces if they are in good shape. Lmk with pictures, thanks.

rusty knuckles 5 · 01-20-2014, 07:49 PM

HI! I noticed on your spid that it said that that truck came with a factory tool storage box it is not clear on the picture of the truck body that there is a box on there, if it does have one what is the condition of door ass'y and is it for sale thanks

**Clatterville trolley** · 01-20-2014, 09:05 PM

If it is a "low rider" - and the pictures do seem to bear that out - what about the means used to lower it? Does it have dropped spindles? Are the coil springs the aftermarket replacement shorter ones used to lower a C10?? If so, is any of it for sale and how much?

Thanks, Jay

dec010974 · 01-20-2014, 09:50 PM

hello. I'm looking for a set of rear bumper brackets. shipping to Miami, Florida 33176, if you have them.

**too much stuff** · 01-20-2014, 10:19 PM

Quote:

Originally Posted by Kennuck

I will take the gauges and knobs.
Thanks
Ken
48060

Will send a PM..

Quote:

Originally Posted by kaphillips

I am interested in the wood bed cross sill braces if they are in good shape. Lmk with pictures, thanks.

Steel floor, sorry.

Quote:

Originally Posted by rusty knuckles 5

HI! I noticed on your spid that it said that that truck came with a factory tool storage box it is not clear on the picture of the truck body that there is a box on there, if it does have one what is the condition of door ass'y and is it for sale thanks

No tool box, box has been changed at some point.

Quote:

Originally Posted by Clatterville trolley

If it is a "low rider" - and the pictures do seem to bear that out - what about the means used to lower it? Does it have dropped spindles? Are the coil springs the aftermarket replacement shorter ones used to lower a C10?? If so, is any of it for sale and how much?

Thanks, Jay

Just a quick look looks like cut springs.

Quote:

Originally Posted by dec010974

hello. I'm looking for a set of rear bumper brackets. shipping to Miami, Florida 33176, if you have them.

Sorry, no rear bumper or brackets on this one. If i run across a set, i will post them up for you.

**too much stuff** · 01-21-2014, 06:55 PM

Quote:

Originally Posted by Kennuck

I will take the gauges and knobs.
Thanks
Ken
48060

Gauges sold to ken. Thanks.

**too much stuff** · 01-21-2014, 08:20 PM

More...
Pair of kick panel vents for non a/c. Decent shape, $27.50 shipped.

Parts lot... A/c controler has a decent face. Top arm has been repaired. switch needs work. Cables are good. Better for parts maybe. Center vent has a crack in the bezel, otherwise looks fine. Lighter housing and harness look good, lighter is missing the element.
$45 shipped for all 3 parts.

kda2000 · 01-22-2014, 01:02 AM

Is the power brake & MC unit, brackets, pedal rod? -- can you check that PB unit holds vacuum? Price and shipping to 78737?

Also, I'll take the kick panel vents - will need payment instructions - Thanks, Ken

**too much stuff** · 01-25-2014, 12:18 AM

Off to scrap tomorrow...

Kick panels vents are sold.

barracuda5K · 01-28-2014, 05:13 PM

this is barracuda 5k. IF YOU ARE PARTING OUT THIS A/C CAB I NEED THE ENTIRE FIREWALL. YOU CAN E MAIL@ BARRACUDA 5 K@YAHOO.COM WITH PRICE &SHIPPING CHARGES. THANK YOU

**too much stuff** · 01-28-2014, 05:29 PM

Quote:

Originally Posted by barracuda5K

this is barracuda 5k. IF YOU ARE PARTING OUT THIS A/C CAB I NEED THE ENTIRE FIREWALL. YOU CAN E MAIL@ BARRACUDA 5 K@YAHOO.COM WITH PRICE &SHIPPING CHARGES. THANK YOU

Already on the trailer and heading to scrap in the morning...

01-20-2014, 05:47 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,703	Parting out a rusty 70. Not alot here but will start with these. I will also add parts as i pull them or if you see something ask and i will price it. Here goes... Aluminum slot wheels (4) $200 no shipping. Engine with all pullies and brackets $175. 350 that ran but had a noise in it. Turns by hand and has oil in it. Builder. Upper door retainers. Driver condition. $30 shipped Door mechanisims $65 shipped. Pass window mech is a little loose but works fine, and pass latch relay has a broken spring. I think all the little clips and screws are there. Gauges and knobs. $50 shipped. Looks like a clean unit, bezel is bad. PC looks good. Lens lot. All decent drivers with a piece missing off the bottom of a tail light lens. $45 shipped. Visors /arm rest lot. $70 shipped. One arm rest is dirty with a small split. Visors and clips look good. Mirror has typical hazing around the edges. Seat belts. $40 shipped. Work fine, one boot is broken up. You get the floor pieces still bolted to the outers. These pieces are off a 44 year old truck. Ask if you see anything else. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-20-2014, 05:51 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,703	Re: Parting out a rusty 70. Pics of the low rider... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-20-2014, 05:55 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,703	Re: Parting out a rusty 70. And more pics... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-20-2014, 05:58 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,703	Re: Parting out a rusty 70. Was a nice truck in its day. (glove box door not for sale) Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-20-2014, 06:37 PM	#5
Kennuck Registered User Join Date: Oct 2013 Location: Dresden, Ontario Posts: 647	Re: Parting out a rusty 70. I will take the gauges and knobs. Thanks Ken 48060 __________________ 1970 Short Wide 5.3 4L60E BlackBear tune 3:73 gears, Boyd's Tank 2.5 / 4 drop 5 lug disc brakes Vintage Air 18x8 Ridlers 255/55 frt. 18x9.5 275/60 rear

01-20-2014, 06:54 PM	#6
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: Parting out a rusty 70. I am interested in the wood bed cross sill braces if they are in good shape. Lmk with pictures, thanks.

01-20-2014, 07:49 PM	#7
rusty knuckles 5 Registered User Join Date: Dec 2011 Location: coulterville calif Posts: 263	Re: Parting out a rusty 70. HI! I noticed on your spid that it said that that truck came with a factory tool storage box it is not clear on the picture of the truck body that there is a box on there, if it does have one what is the condition of door ass'y and is it for sale thanks

01-20-2014, 09:05 PM	#8
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,934	Re: Parting out a rusty 70. If it is a "low rider" - and the pictures do seem to bear that out - what about the means used to lower it? Does it have dropped spindles? Are the coil springs the aftermarket replacement shorter ones used to lower a C10?? If so, is any of it for sale and how much? Thanks, Jay

01-20-2014, 09:50 PM	#9
dec010974 Registered User Join Date: Oct 2012 Location: Miami, Florida Posts: 911	Re: Parting out a rusty 70. hello. I'm looking for a set of rear bumper brackets. shipping to Miami, Florida 33176, if you have them.

01-21-2014, 08:20 PM	#12
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,703	Re: Parting out a rusty 70. More... Pair of kick panel vents for non a/c. Decent shape, $27.50 shipped. Parts lot... A/c controler has a decent face. Top arm has been repaired. switch needs work. Cables are good. Better for parts maybe. Center vent has a crack in the bezel, otherwise looks fine. Lighter housing and harness look good, lighter is missing the element. $45 shipped for all 3 parts. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-22-2014, 01:02 AM	#13
kda2000 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 170	Re: Parting out a rusty 70. Is the power brake & MC unit, brackets, pedal rod? -- can you check that PB unit holds vacuum? Price and shipping to 78737? Also, I'll take the kick panel vents - will need payment instructions - Thanks, Ken

01-25-2014, 12:18 AM	#14
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,703	Re: Parting out a rusty 70. Off to scrap tomorrow... Kick panels vents are sold. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-28-2014, 05:13 PM	#15
barracuda5K Registered User Join Date: Jan 2014 Location: Harding Posts: 17	Re: Parting out a rusty 70. this is barracuda 5k. IF YOU ARE PARTING OUT THIS A/C CAB I NEED THE ENTIRE FIREWALL. YOU CAN E MAIL@ BARRACUDA 5 K@YAHOO.COM WITH PRICE &SHIPPING CHARGES. THANK YOU



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.