|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-08-2010, 01:33 PM
|
#1 |
|
It's alsways something.....
 
Join Date: Nov 2008
Location: Douglasville GA
Posts: 1,171
|
03 2500HD needs raised in front
Hey Guys, I usually post on the 67-72 area since my 'hobby' truck is a 67 SB. I just bought a 03 2500HD 4x4 with duramax and the front suspension needs to come up some (needs more suspension travel) It nearly sits on the bumpers on the A arms and rides rough. I assume that the torsion bars are adjustable. Can someone fill me in on the details? Thanks! Chuck
Last edited by chuckmc8; 05-08-2010 at 02:58 PM. |
|
|
|
05-11-2010, 03:38 PM
|
#2 |
|
He's got mean nasty FANGS!
 
Join Date: Dec 1999
Location: Rockwell, NC
Posts: 6,508
|
Re: 03 2500HD needs raised in front
You can adjust the torsion bars up as long as you use a tape measure to keep it even side to side. You will have to have it aligned however as ride height changes will completely change the alignment and cause tire wear.
__________________
2004 K2500 Burb 1999 C3500 1985 Cutlass Supreme 1969 C-10 1967 C-10 Panel josh@67-72chevytrucks.com |
|
|
|
|
05-11-2010, 07:20 PM
|
#3 |
|
Registered User
Join Date: Feb 2010
Location: Parsons, KS
Posts: 357
|
Re: 03 2500HD needs raised in front
the easiest way to make sure you keep both sides level with each other is just count the number of turns you go on each bolt and keep them equal and like said have it aligned as soon as possible after doing it.
__________________
James 94' Chevy K1500 Extended Cab 4x4 5.7 72' Chevy LWB K10, 350, SM465, NP205 Project "Daily Driver" |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
