My latest project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Yukon Jack** · 06-07-2002, 09:37 AM

Last couple evenings I have been making side boards for my flatbed. I still have to finish the board for the rear of the bed and modify the stakes that will be at the front of the bed.

I counter-sunk the inside of the board so the bolts and nuts are flush with the inside of the board and I am very happy with how that turned out. Broke out a cigar while I was doing the work and before I knew it, it was midnight. Hopefully I will finish the back board tonight. I need to run over to a friend's to do the last cut as I don't have a radial arm saw and I suck at using a skill saw.

*Randy70C-10* · 06-07-2002, 09:43 AM

That's cool as hell dude! I'll update my website when I get home.

**Yukon Jack** · 06-07-2002, 10:07 AM

Here's a couple pics of the counter-sunk holes.

And here's a pic of where the front stake will go into the steel pocket. Makes it very stable.

Finally, this is what it looks like when an idiot parks really close to the back of my truck. Hope I don't roll backwards!

dubie · 06-07-2002, 10:20 AM

I will be building similar ones for mine too. You did a great job on those rails Yukon!!! Just adds to the whole toughness thing that truck of yours has goin' on. Mine is gonna look like a junior 72 compared to that monster.

Update: The bed is being removed on Monday and construction of the flatbed will start on Tuesday

VNMOUS · 06-07-2002, 11:22 AM

COOL!! I'M THINKING ABOUT BUILDING SOME OUT OF OAK FOR MY STEP SIDE.

Big69C20 Toy · 06-07-2002, 11:47 AM

Looks totally sweet! Better coat those boards though, unless you dont mind losing them when it gets all wet.

barn9 · 06-07-2002, 12:35 PM

Lookin' good, and no more worries about stuff sliding off the bed. I like whole setup, hope to get something similar one ot these days. By the way, there is a truck/car show down here in Winfield on Sunday, June 23rd, at the fairgrounds. Come down and visit, I'll have the truck there unless something bad happens between now and then. It would be nice to meet you in person.

barn9 · 06-07-2002, 12:38 PM

I forgot to ask you something. How did you post multiple pics on your post?

**Yukon Jack** · 06-07-2002, 02:05 PM

I used treated lumber so I should be fine on the weather issued.

Barn9 - I will make a real effort to make it. I check my calendar tonight to see how it looks. Would be great to meet you. You ought to post a separate topic letting the nearby memebers know about it - we have quite a few in the area now.

As far as the multiple pics, I just did the old [ img ] mysite [ /img ] link and it works fine for me. On the 4x4 site though when I try it only gives a link and doesn't show the pics. Strange. Also, are other people getting e-mail notifications on your messages? I've got mine set up to do so, but I'm getting no notifications.

barn9 · 06-07-2002, 03:25 PM

Hey, good to hear from you. I am supposed to get my entry form today or tomorrow, and then I'll have some more details to post. I didn't have the e-mail box checked, but I do now, so I'll see if it works if you give me a reply. The guy that is starting this show is a 20 year vet of Tumbleweeds car club in Ark City, and he dicided to start one here in Winfield because we have the fairgrounds, which is a far better location for a car show. Also, he wanted to have a show for the truck guys to be a bigger part of, which is great. His plan is that this will be the first of an annual event. It's just going to be a 1 day show, so I'm not sure how the turnout will be. On the plus side, he travels to a lot of car shows with his T-shirt business, so he knows a lot of people in this part of the country. I'll get the info posted just as soon as I get the details. Cya!

**Yukon Jack** · 06-07-2002, 03:46 PM

The guy who is going to help me swap my tranny is maybe available on June 22 - if so I sure hope we get it done. I would hate to be able to come up on Sunday but not be able to drive my truck. Will be looking forward to the details.

**68SWB4x4** · 06-07-2002, 03:54 PM

hahaha what kind of moron would park with a hitch level with their windsheild?

barn9 · 06-07-2002, 04:21 PM

Got your e-mail notification, so it's working for me anyway. Good luck on the tranny swap, that's one of those jobs that I consider NO FUN! That guy was a moron wasn't he? He-hee, I could see a new aerodynamic deflection groove mysteriously appearing, compliments of the truck gods, he-hee!

Mike C · 06-07-2002, 10:11 PM

Looks awesome Mark! I think you could use a drop hithc, though...

BLAZERMAN · 06-07-2002, 10:55 PM

Lookin tougher all the time, I really like that last pic, just a few inches closer and that guy would have a 2" trailer ball for a hood ornament.

J · 06-07-2002, 11:14 PM

Very nice.

*racedvl* · 06-07-2002, 11:26 PM

Man I'm digg'n your truck!! Remind me, did you build that bed or buy it?

**Yukon Jack** · 06-09-2002, 10:06 AM

Mike C - My flatbed trailer is really tall - I told my wife that's why I had to lift my truck - to make it line up with the trailer . . . they don't make drop hitches that I could have turned over, yea that's it. I actually do need to flip the hitch bar so the ball is about one inch lower to make the trailer sit right. Now if I was pulling a horse trailer or a normal height trailer I definitely need a real drop hitch.

Racedvl - I had the bed custom built - had modifications done to the standard flat beds that a local company, Bradtech, sells. I had the lights added in the headache rack, louvers with the center cut out for a slider window (got to get one someday), higher gussets that tie the headache rack to the bed (going to have a custom gas tank built that will be on top of the bed and follow the lines of the gussets), different brake and backup lights, treadplate for rear apron, and then I whimped out and let them install the receiver hitch. Was going to do that myself then decided to go the easy route and get it done all at one time.

Thanks for the great comments - Friday afternoon I went and got a load of sand and it sure was helpful having those side boards. Full dozer bucket of sand squated the truck down a bit. (Pics, of course I took a pic) The truckin front of me was a little Sonoma. Had ground effects that went over the wheel wells. Was kinda fun watching it nearly hit the ground when the dozer operator dropped that load of sand. I was about a 1/2 mile from the sand pit and looked over at a turn out and that guy was standing next to his Sonoma. I stopped and he said the tires were rubbing real bad. Offered to help him push some of the sand off, he said he was just going to go very slow. Poor guy, bet he didn't make it very far.

Mike C · 06-09-2002, 11:36 AM

LOL! Fortunately steel flat beds are a lot cheaper than lift hitches so you didn't have to go that way

06-07-2002, 09:37 AM	#1
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	My latest project Last couple evenings I have been making side boards for my flatbed. I still have to finish the board for the rear of the bed and modify the stakes that will be at the front of the bed. I counter-sunk the inside of the board so the bolts and nuts are flush with the inside of the board and I am very happy with how that turned out. Broke out a cigar while I was doing the work and before I knew it, it was midnight. Hopefully I will finish the back board tonight. I need to run over to a friend's to do the last cut as I don't have a radial arm saw and I suck at using a skill saw. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 01-12-2008 at 08:19 AM.

06-07-2002, 10:07 AM	#3
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Here's a couple pics of the counter-sunk holes. And here's a pic of where the front stake will go into the steel pocket. Makes it very stable. Finally, this is what it looks like when an idiot parks really close to the back of my truck. Hope I don't roll backwards! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 01-12-2008 at 09:29 AM.

06-07-2002, 10:20 AM	#4
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	I will be building similar ones for mine too. You did a great job on those rails Yukon!!! Just adds to the whole toughness thing that truck of yours has goin' on. Mine is gonna look like a junior 72 compared to that monster. Update: The bed is being removed on Monday and construction of the flatbed will start on Tuesday __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

06-07-2002, 11:22 AM	#5
VNMOUS Step Side's Rule Join Date: Feb 2002 Location: LEIGHTON,AL USA Posts: 227	COOL!! I'M THINKING ABOUT BUILDING SOME OUT OF OAK FOR MY STEP SIDE. __________________ DANO 07 Silverado Classic 67shortstep 76 stingray 95 cobra 66 Mustang Coupe 289

06-07-2002, 11:47 AM	#6
Big69C20 Toy Livin' it up. Join Date: Nov 2001 Location: Richland, MI Posts: 2,212	Looks totally sweet! Better coat those boards though, unless you dont mind losing them when it gets all wet. __________________ -Greg; Sold the 69 C20. It's off to a better home with more love! Now onto the 86 CUCV M1009; K5 blazer with 6.2L diesel, corp 10 bolt axles, Detroit locker in the rear, trutrac front, 3.73 gears, 35" tires.

06-07-2002, 09:43 AM	#2
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	That's cool as hell dude! I'll update my website when I get home.

06-07-2002, 12:35 PM	#7
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	Lookin' good, and no more worries about stuff sliding off the bed. I like whole setup, hope to get something similar one ot these days. By the way, there is a truck/car show down here in Winfield on Sunday, June 23rd, at the fairgrounds. Come down and visit, I'll have the truck there unless something bad happens between now and then. It would be nice to meet you in person. __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

06-07-2002, 12:38 PM	#8
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	I forgot to ask you something. How did you post multiple pics on your post? __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

06-07-2002, 02:05 PM	#9
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	I used treated lumber so I should be fine on the weather issued. Barn9 - I will make a real effort to make it. I check my calendar tonight to see how it looks. Would be great to meet you. You ought to post a separate topic letting the nearby memebers know about it - we have quite a few in the area now. As far as the multiple pics, I just did the old [ img ] mysite [ /img ] link and it works fine for me. On the 4x4 site though when I try it only gives a link and doesn't show the pics. Strange. Also, are other people getting e-mail notifications on your messages? I've got mine set up to do so, but I'm getting no notifications. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

06-07-2002, 03:25 PM	#10
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	Hey, good to hear from you. I am supposed to get my entry form today or tomorrow, and then I'll have some more details to post. I didn't have the e-mail box checked, but I do now, so I'll see if it works if you give me a reply. The guy that is starting this show is a 20 year vet of Tumbleweeds car club in Ark City, and he dicided to start one here in Winfield because we have the fairgrounds, which is a far better location for a car show. Also, he wanted to have a show for the truck guys to be a bigger part of, which is great. His plan is that this will be the first of an annual event. It's just going to be a 1 day show, so I'm not sure how the turnout will be. On the plus side, he travels to a lot of car shows with his T-shirt business, so he knows a lot of people in this part of the country. I'll get the info posted just as soon as I get the details. Cya! __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

06-07-2002, 03:46 PM	#11
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	The guy who is going to help me swap my tranny is maybe available on June 22 - if so I sure hope we get it done. I would hate to be able to come up on Sunday but not be able to drive my truck. Will be looking forward to the details. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

06-07-2002, 03:54 PM	#12
68SWB4x4 Strongman Garage Join Date: Apr 2000 Location: Salinas, CA Posts: 10,241	hahaha what kind of moron would park with a hitch level with their windsheild? __________________ Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE

06-07-2002, 04:21 PM	#13
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	Got your e-mail notification, so it's working for me anyway. Good luck on the tranny swap, that's one of those jobs that I consider NO FUN! That guy was a moron wasn't he? He-hee, I could see a new aerodynamic deflection groove mysteriously appearing, compliments of the truck gods, he-hee! __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

06-07-2002, 10:11 PM	#14
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,714	Looks awesome Mark! I think you could use a drop hithc, though... __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

06-07-2002, 10:55 PM	#15
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Lookin tougher all the time, I really like that last pic, just a few inches closer and that guy would have a 2" trailer ball for a hood ornament. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C



Register or Log In To remove these advertisements.

06-07-2002, 11:14 PM	#16
J Registered User Join Date: Oct 2001 Location: Yuma, AZ Posts: 164	Very nice. __________________ '72 C-10 '99 Silverado '91 S-Dime

06-07-2002, 11:26 PM	#17
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Man I'm digg'n your truck!! Remind me, did you build that bed or buy it?

06-09-2002, 10:06 AM	#18
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Mike C - My flatbed trailer is really tall - I told my wife that's why I had to lift my truck - to make it line up with the trailer . . . they don't make drop hitches that I could have turned over, yea that's it. I actually do need to flip the hitch bar so the ball is about one inch lower to make the trailer sit right. Now if I was pulling a horse trailer or a normal height trailer I definitely need a real drop hitch. Racedvl - I had the bed custom built - had modifications done to the standard flat beds that a local company, Bradtech, sells. I had the lights added in the headache rack, louvers with the center cut out for a slider window (got to get one someday), higher gussets that tie the headache rack to the bed (going to have a custom gas tank built that will be on top of the bed and follow the lines of the gussets), different brake and backup lights, treadplate for rear apron, and then I whimped out and let them install the receiver hitch. Was going to do that myself then decided to go the easy route and get it done all at one time. Thanks for the great comments - Friday afternoon I went and got a load of sand and it sure was helpful having those side boards. Full dozer bucket of sand squated the truck down a bit. (Pics, of course I took a pic) The truckin front of me was a little Sonoma. Had ground effects that went over the wheel wells. Was kinda fun watching it nearly hit the ground when the dozer operator dropped that load of sand. I was about a 1/2 mile from the sand pit and looked over at a turn out and that guy was standing next to his Sonoma. I stopped and he said the tires were rubbing real bad. Offered to help him push some of the sand off, he said he was just going to go very slow. Poor guy, bet he didn't make it very far. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

06-09-2002, 11:36 AM	#19
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,714	LOL! Fortunately steel flat beds are a lot cheaper than lift hitches so you didn't have to go that way __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

Register or Log In To remove these advertisements.