3 hours and $32.00 and.... Voila - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Suicide-D · 05-23-2003, 11:06 PM

We have a cab stand!! I know I made mine alot shorter than most of ya'lls but I don't have to do anything to bottom of the cab thats going on it. Just some firewall shaving and filler neck elimination... I have been waiting to work on this cab for over a year I think...and I still have to wait till I get it ver here tommorrow.

dons72 · 05-24-2003, 07:10 AM

Nice I see you put the casters with the brakes on it. What were the dimensions on this.

Seke69 · 05-24-2003, 08:04 AM

yeah it looks like it'd work well. I could also use some dimensions (if you don't mind).

Did you use 5 8ft 2x4s? if that's the case it should only be about $7 for me (I already have a million casters (none that fancy though!)).

**old Rusty C10** · 05-24-2003, 09:44 AM

looks good post a pic of the cab on it

Suicide-D · 05-27-2003, 10:26 AM

I put lag screws in the front to hold the cab down and I will have to pick it up and put it on jack stands to drill a hole through the back to put some all thread through the back mounts. I'll post pics of the cab on it tonight.

**Yukon Jack** · 05-27-2003, 10:55 AM

Looks very stout!

Suicide-D · 05-27-2003, 07:59 PM

here she is...waiting

Suicide-D · 05-27-2003, 08:00 PM

a shot of the seats in her...

casey · 05-27-2003, 09:59 PM

nice buckets they'll look sweet in there, are you doing it the same color, I like that color

Suicide-D · 05-27-2003, 10:34 PM

the color is still a toss up... either metallic green or shadow grey... I have mixed emotions...

Orence1 · 05-28-2003, 01:16 AM

Nice seats. Exactly like mine.

Suicide-D · 05-28-2003, 09:41 AM

Orence1- I see 2 things in your picture and I have questions... I see you are using the middle seat and A mega shifter. is that correct? I can't really tell in the picture but it looks like a mega shifter. anyway how do those two work together? I thought after mocking mine up that I couldnt use the middle seat and still reach the shifter. I don't have the shifter yet so I may be wrong.

Thanks to all for the comments

Orence1 · 06-01-2003, 08:55 PM

Dirt,
Yes I am using the middle seat and it is a Starshifter. I have plenty of room in the park position as far as the bottom of the dash is concerned. The handle is a bit close to the middle seat in the ratchet "low" position but does not prevent full movement. I will solve that by raising the shifter with a bracket of some sort for it to sit on and by using a longer plastic base cover that I understand B&M has for the taller truck versions. If I can be of any help, let me know.
Larry

05-23-2003, 11:06 PM	#1
Suicide-D Registered User Join Date: Jan 2001 Location: Katy, TX...but the love of my life resides in Dublin,OH. Posts: 1,408	3 hours and $32.00 and.... Voila We have a cab stand!! I know I made mine alot shorter than most of ya'lls but I don't have to do anything to bottom of the cab thats going on it. Just some firewall shaving and filler neck elimination... I have been waiting to work on this cab for over a year I think...and I still have to wait till I get it ver here tommorrow. Attached Images

05-24-2003, 07:10 AM	#2
dons72 Registered User Join Date: Mar 2003 Location: Newport News, Va Posts: 230	Nice I see you put the casters with the brakes on it. What were the dimensions on this. __________________ 72 cheyenne super

05-24-2003, 09:44 AM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,268	looks good post a pic of the cab on it __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-27-2003, 10:26 AM	#5
Suicide-D Registered User Join Date: Jan 2001 Location: Katy, TX...but the love of my life resides in Dublin,OH. Posts: 1,408	it worked good.... I put lag screws in the front to hold the cab down and I will have to pick it up and put it on jack stands to drill a hole through the back to put some all thread through the back mounts. I'll post pics of the cab on it tonight. Attached Images

05-27-2003, 10:55 AM	#6
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Looks very stout! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

05-24-2003, 08:04 AM	#3
Seke69 Space Cadet Join Date: Mar 2003 Location: Twin Cities Posts: 132	yeah it looks like it'd work well. I could also use some dimensions (if you don't mind). Did you use 5 8ft 2x4s? if that's the case it should only be about $7 for me (I already have a million casters (none that fancy though!)).

05-27-2003, 07:59 PM	#7
Suicide-D Registered User Join Date: Jan 2001 Location: Katy, TX...but the love of my life resides in Dublin,OH. Posts: 1,408	as promised here she is...waiting Attached Images

05-27-2003, 08:00 PM	#8
Suicide-D Registered User Join Date: Jan 2001 Location: Katy, TX...but the love of my life resides in Dublin,OH. Posts: 1,408	a shot of the seats in her... Attached Images

05-27-2003, 09:59 PM	#9
casey Registered User Join Date: Jan 2003 Location: Kelowna B.C. Canada Posts: 2,048	nice buckets they'll look sweet in there, are you doing it the same color, I like that color

05-27-2003, 10:34 PM	#10
Suicide-D Registered User Join Date: Jan 2001 Location: Katy, TX...but the love of my life resides in Dublin,OH. Posts: 1,408	the color is still a toss up... either metallic green or shadow grey... I have mixed emotions...

05-28-2003, 01:16 AM	#11
Orence1 Registered User Join Date: Jan 2000 Location: Bothell, WA Posts: 548	Nice seats. Exactly like mine. Attached Images

05-28-2003, 09:41 AM	#12
Suicide-D Registered User Join Date: Jan 2001 Location: Katy, TX...but the love of my life resides in Dublin,OH. Posts: 1,408	Orence1- I see 2 things in your picture and I have questions... I see you are using the middle seat and A mega shifter. is that correct? I can't really tell in the picture but it looks like a mega shifter. anyway how do those two work together? I thought after mocking mine up that I couldnt use the middle seat and still reach the shifter. I don't have the shifter yet so I may be wrong. Thanks to all for the comments

06-01-2003, 08:55 PM	#13
Orence1 Registered User Join Date: Jan 2000 Location: Bothell, WA Posts: 548	Dirt, Yes I am using the middle seat and it is a Starshifter. I have plenty of room in the park position as far as the bottom of the dash is concerned. The handle is a bit close to the middle seat in the ratchet "low" position but does not prevent full movement. I will solve that by raising the shifter with a bracket of some sort for it to sit on and by using a longer plastic base cover that I understand B&M has for the taller truck versions. If I can be of any help, let me know. Larry



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.