Update Photos - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NPilot1975 · 05-30-2003, 02:31 AM

Just thought I would show you guys a little of the progress I have made on my truck. These are engine and interior pictures. I will have some new under the hood parts and a new underbed tank soon.

NPilot1975 · 05-30-2003, 02:32 AM

Another engine pic.

NPilot1975 · 05-30-2003, 02:33 AM

Another

NPilot1975 · 05-30-2003, 02:34 AM

Dash

NPilot1975 · 05-30-2003, 02:35 AM

Seats

NPilot1975 · 05-30-2003, 02:36 AM

Passenger Seat

NPilot1975 · 05-30-2003, 02:38 AM

The new painless fuse block, mounted in the driver's side kick panel vent. As you can see, I have a lot of wiring to do.

GMC JUNKIE TOO · 05-30-2003, 02:53 AM

Lookin sharp I really like the no limit dash. My friend is about to install a painless wiring kit in his 57 they make a really good product.

**Yukon Jack** · 05-30-2003, 09:46 AM

Engine looks very at home in there.

*Randy70C-10* · 05-30-2003, 09:50 AM

Damn!

XXL · 05-30-2003, 10:03 AM

Nice.

So can you say whether the Painless wiring product is very painless??

bouncytruck · 05-30-2003, 11:38 AM

Very Nice looking. I like the painted inner fenders with that engine. Where did you get the dash panel?

Pumkin Truck · 05-30-2003, 11:53 AM

NICE!

Smooth68 · 05-30-2003, 12:51 PM

hey...thats a similar spot as to where I mounted my fuse panel. Trucks looking good.

67chevemall · 05-30-2003, 01:43 PM

Doesn't that fuse panel get wet in there?

jay-dawg · 05-30-2003, 01:52 PM

lookin good.

Chevyguy111786 · 05-30-2003, 03:23 PM

what are your seats out of?? around how much did you get em for?? thanks...trucks lookin sweet! i wish i could see some progress like that on mine...LOL

NPilot1975 · 05-30-2003, 05:03 PM

XXL So far the kit has been painless, it come with some good instructions. I haven't gotten everything wired up, but most of the right plugs, etc are there. I can tell you more in a few weeks, when I finish it.

bouncytruck The dash is from No Limit www.nolimit.net, it is billet aluminum.

67chevemall I cut through the cowl section behind the fender. I am making pieces to finish it so it will essentually be the same as the firewall. It just allows me to smooth the firewall that much more.

Chevyguy111786 The seats are from Steel Horse, which is no longer around. I bought them from Autobahn, they have a website. They cost around $800. They still may have some. The quality is good, all but the mounting brackets. I am going to make my own

DevinM · 06-01-2003, 11:21 PM

What kind of headers are those?

NPilot1975 · 06-01-2003, 11:27 PM

They are street and performance ceramic coated headers. They cost around $400 dollars. They are very well made. All the welds are ground completely smooth.

9teen69 · 06-02-2003, 12:03 AM

Looks good...even with a big motor there's still a lot of room under the hood.

72shadetree · 06-02-2003, 12:16 AM

looking good

05-30-2003, 02:31 AM	#1
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Update Photos Just thought I would show you guys a little of the progress I have made on my truck. These are engine and interior pictures. I will have some new under the hood parts and a new underbed tank soon. Attached Images __________________ 1972 Blazer body...need to get a thread started for the rest of the story

05-30-2003, 02:32 AM	#2
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Another engine pic. Attached Images __________________ 1972 Blazer body...need to get a thread started for the rest of the story

05-30-2003, 02:33 AM	#3
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Another Attached Images __________________ 1972 Blazer body...need to get a thread started for the rest of the story

05-30-2003, 02:34 AM	#4
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Dash Attached Images __________________ 1972 Blazer body...need to get a thread started for the rest of the story

05-30-2003, 02:35 AM	#5
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Seats Attached Images __________________ 1972 Blazer body...need to get a thread started for the rest of the story

05-30-2003, 02:36 AM	#6
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Passenger Seat Attached Images __________________ 1972 Blazer body...need to get a thread started for the rest of the story

05-30-2003, 02:38 AM	#7
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	The new painless fuse block, mounted in the driver's side kick panel vent. As you can see, I have a lot of wiring to do. Attached Images __________________ 1972 Blazer body...need to get a thread started for the rest of the story

05-30-2003, 02:53 AM	#8
GMC JUNKIE TOO THE QUICKER FIXERUPER Join Date: Jul 2002 Location: Ok Posts: 615	Lookin sharp I really like the no limit dash. My friend is about to install a painless wiring kit in his 57 they make a really good product.

05-30-2003, 09:46 AM	#9
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Engine looks very at home in there. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

05-30-2003, 09:50 AM	#10
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Damn!

05-30-2003, 10:03 AM	#11
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Nice. So can you say whether the Painless wiring product is very painless?? __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

05-30-2003, 11:38 AM	#12
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Very Nice looking. I like the painted inner fenders with that engine. Where did you get the dash panel? __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

05-30-2003, 11:53 AM	#13
Pumkin Truck Thats just prime! Join Date: Mar 2002 Location: TEXAS Posts: 720	NICE! __________________ 69 GMC short bed stepside with a wimpy six that can barely pull itself. 99 Chevrolet Camaro Z-28 1 Bad 5.7ltr LS1

05-30-2003, 12:51 PM	#14
Smooth68 Registered User Join Date: Aug 2001 Location: West Fork, Arkansas - Razorback Country Posts: 1,826	hey...thats a similar spot as to where I mounted my fuse panel. Trucks looking good. __________________ Smooth68's Web Site WTB 64-66 project or frame/cab, SWB or LWB...I have the fever! Whatcha got?? '68 Short Step - Shaved Body, Soon Bagged - *SOLD* Driver-2004 GMC Z-71 Ext-cab

05-30-2003, 01:43 PM	#15
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Doesn't that fuse panel get wet in there?



Register or Log In To remove these advertisements.

05-30-2003, 01:52 PM	#16
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	lookin good. __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

05-30-2003, 03:23 PM	#17
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	what are your seats out of?? around how much did you get em for?? thanks...trucks lookin sweet! i wish i could see some progress like that on mine...LOL

05-30-2003, 05:03 PM	#18
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	XXL So far the kit has been painless, it come with some good instructions. I haven't gotten everything wired up, but most of the right plugs, etc are there. I can tell you more in a few weeks, when I finish it. bouncytruck The dash is from No Limit www.nolimit.net, it is billet aluminum. 67chevemall I cut through the cowl section behind the fender. I am making pieces to finish it so it will essentually be the same as the firewall. It just allows me to smooth the firewall that much more. Chevyguy111786 The seats are from Steel Horse, which is no longer around. I bought them from Autobahn, they have a website. They cost around $800. They still may have some. The quality is good, all but the mounting brackets. I am going to make my own __________________ 1972 Blazer body...need to get a thread started for the rest of the story

06-01-2003, 11:21 PM	#19
DevinM Registered User Join Date: Jan 2002 Location: Deerfield, MA USA Posts: 198	What kind of headers are those? __________________ '71 Chevy C-10 - Current '62 Imapla SS - Traded for my current '73 Nova Hatch - traded for ATC-350X '73 Chevelle Deluxe - First car (R.I.P) DEERFIELD, MA

06-01-2003, 11:27 PM	#20
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	They are street and performance ceramic coated headers. They cost around $400 dollars. They are very well made. All the welds are ground completely smooth. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

06-02-2003, 12:03 AM	#21
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Looks good...even with a big motor there's still a lot of room under the hood. __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

06-02-2003, 12:16 AM	#22
72shadetree KEEP ON TRUCKING Join Date: Sep 2000 Location: martinsville va Posts: 2,563	looking good __________________ 72 cheyenne 2wd lwb 71 k20 sons bassett va

Register or Log In To remove these advertisements.