Roushinator's 72 C10 Stepside Restore/Build - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cooperhw · 12-29-2015, 12:01 PM

Quote:

Originally Posted by swamp rat

Personally i think this thread deserves an ongoing and updated parts list so rookies like me can put 2 and 2 together and figure out how to build one of these things! LOL!

Lets just say this would be a go to thread for tho's of us that need more than pictures.

Awesome work!

Ongoing and parts list;'

Time, time, money, money, money, time, money, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,< = more time and money.

68GMCCustom · 12-30-2015, 11:15 PM

Nice work.... and parts too! I'm particularly fond of the No Limit R&P upgrade...something I'm looking at myself.

**roushinator** · 01-17-2016, 10:45 AM

Nothing real exciting.... But i ordered all my fuel line and fittings. Black nylon braided hose with Black AN fittings. I still have to order a few more pieces. Also i made my top radiator hose and bottom. Not real happy with the bottom so i might redo it.

Bottom..

Top...

**roushinator** · 03-20-2016, 04:27 PM

A lot of learning has been going on but not a whole lot of progress... Where do i begin.

I am still working on exhaust. I think i figured out how to support it while i fabricate it. Will show that later. Still need to run Fuel lines. Learned how to make the AN fittings to the hoses.

Now to the fun stuff..

I found the correct adapter plate and installed my TB and fuel line between the fuel rails. I used that to learn how to make the AN fitting connections. Oh and after much trial and error i found the correct length belt.

Well i did not realize that the injectors from the Camaro are compact versions and would not fit in my intake. They are the EV14 compact but i need the LS1 size injectors.

So i started looking for adapters. I found these and bought them.

But they were still a little too short and i was worried about leakage from the way it was designed. So i called the guy at Fuel Injection Connection and he told me to buy his adapters and the ones i had were crap. LOL So i did. Their adapters are WAY better and are the correct length. And as you can see these have a lock to keep them in place.

So i still have to install them but decided to wait until i got the intake bolted down. Ii had to measure to find the correct ARP bolts and had to get some Felpro gaskets since the stock intake came with individual oring gaskets. So i when i bolted it down i noticed that it was hitting on someting and would not bolt down all the way. Below is each side of the intake.

Upon further investigation the intake cross supports were hitting on the edges of the valley cover plate. So i started looking into options... I think i found a solution. I found that the LSA supercharged engines use a metal/oring gasket that is thicker.

I ordered a set and they line up and everything appears to work good. Everything lines up.

Ran out of time to finish bolting it up but will do that this week.

I did install some locking header bolts and got one of the PS hoses made.

**roushinator** · 03-20-2016, 04:28 PM

So here is how i made sure the gaskets stayed in place for the install...

All bolted down. The gaskets worked perfect!

Injectors, Fuel Rails and TB Installed!

All i need to do now is.... Two PS lines, Transmission lines, Fuel Lines and get y new wiring harness and this can be started!

69short · 03-20-2016, 05:07 PM

Great work. It's looking good. Clean build

sperger72 · 03-21-2016, 08:57 AM

Ryan looks awesome. You could come help with my c10.

Zach

sperger72 · 03-21-2016, 09:47 AM

Ryan looks awesome. You could come help with my c10.

Zach

knomadd · 03-21-2016, 11:26 AM

Looking good!

**roushinator** · 03-21-2016, 12:55 PM

Quote:

Originally Posted by sperger72

Ryan looks awesome. You could come help with my c10.

Zach

I would love to. You probably would teach me a thing or two..

Quote:

Originally Posted by knomadd

Looking good!

Thanks!

**roushinator** · 03-29-2016, 02:10 PM

Changed up the fuel line up front. Went under instead of over. I think it looks better...

Started running the fuel lines. This may change a little.

More work this week....

trkfrk · 03-29-2016, 11:45 PM

I can't believe I haven't come across your build before now! Wow!!

knomadd · 03-30-2016, 02:20 PM

The front fuel line does look better routed under the throttlebody. Nice work!

swamp rat · 03-31-2016, 01:52 AM

Nice work!

**roushinator** · 04-10-2016, 04:52 PM

So here is where i am going to mount my coil packs...

Also i was not sure what this was at first but found it it is a steam port. Well it was on the wrong side for my new radiator so i relocated it...

knomadd · 04-11-2016, 05:14 PM

Nice! How are you running the plug wires, above or below the headers? Those steam port pieces look nice too!

sperger72 · 04-12-2016, 04:07 PM

Ryan,

The Mac's engine left is the way to go. Just used it to install my sons LS in his 49. Awesome product. I am ready to see both of our trucks done. We both have a ways to go. I definitely do.

SMKN TA 95 · 04-13-2016, 03:41 PM

What did you end up using for a Power Steering reservoir?

**RRR18** · 04-13-2016, 04:10 PM

Damn

**roushinator** · 05-17-2016, 09:30 AM

Not much going on lately but things will be moving fast here soon. But in the meantime i picked up some new items...

New Custom Fender badges..

And Custom Valve Cover Insert...

Zoomin · 05-17-2016, 10:03 AM

Awesome!!!

jwilb88 · 05-17-2016, 01:06 PM

This thread is responsible for me ordering a complete set of mounts and cross members from PB fab today... Those mounts are sweet!

**roushinator** · 05-17-2016, 01:28 PM

Quote:

Originally Posted by jwilb88

This thread is responsible for me ordering a complete set of mounts and cross members from PB fab today... Those mounts are sweet!

I am glad to be of help. LOL

FullThrottle · 05-24-2016, 09:33 PM

Such a sweet restomod! I'm hoping to start on my '84 soon.
Posted via Mobile Device

sperger72 · 05-25-2016, 10:19 AM

Ryan,

Engine is looking great. What coil pack mounts are you using? We could use this idea on the 49 5 window truck. you can PM me if you would rather

I have not had a lot of time to work on my 67, with oldest son's 49 and my wife's firebird starting. I do have my truck in the body shop getting slicked off and ready for paint.

12-30-2015, 11:15 PM	#227
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Roushinator's 72 C10 Stepside Restore/Build Nice work.... and parts too! I'm particularly fond of the No Limit R&P upgrade...something I'm looking at myself. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

01-17-2016, 10:45 AM	#228
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Nothing real exciting.... But i ordered all my fuel line and fittings. Black nylon braided hose with Black AN fittings. I still have to order a few more pieces. Also i made my top radiator hose and bottom. Not real happy with the bottom so i might redo it. Bottom.. Top... __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

03-20-2016, 04:27 PM	#229
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build A lot of learning has been going on but not a whole lot of progress... Where do i begin. I am still working on exhaust. I think i figured out how to support it while i fabricate it. Will show that later. Still need to run Fuel lines. Learned how to make the AN fittings to the hoses. Now to the fun stuff.. I found the correct adapter plate and installed my TB and fuel line between the fuel rails. I used that to learn how to make the AN fitting connections. Oh and after much trial and error i found the correct length belt. Well i did not realize that the injectors from the Camaro are compact versions and would not fit in my intake. They are the EV14 compact but i need the LS1 size injectors. So i started looking for adapters. I found these and bought them. But they were still a little too short and i was worried about leakage from the way it was designed. So i called the guy at Fuel Injection Connection and he told me to buy his adapters and the ones i had were crap. LOL So i did. Their adapters are WAY better and are the correct length. And as you can see these have a lock to keep them in place. So i still have to install them but decided to wait until i got the intake bolted down. Ii had to measure to find the correct ARP bolts and had to get some Felpro gaskets since the stock intake came with individual oring gaskets. So i when i bolted it down i noticed that it was hitting on someting and would not bolt down all the way. Below is each side of the intake. Upon further investigation the intake cross supports were hitting on the edges of the valley cover plate. So i started looking into options... I think i found a solution. I found that the LSA supercharged engines use a metal/oring gasket that is thicker. I ordered a set and they line up and everything appears to work good. Everything lines up. Ran out of time to finish bolting it up but will do that this week. I did install some locking header bolts and got one of the PS hoses made. __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

03-20-2016, 04:28 PM	#230
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build So here is how i made sure the gaskets stayed in place for the install... All bolted down. The gaskets worked perfect! Injectors, Fuel Rails and TB Installed! All i need to do now is.... Two PS lines, Transmission lines, Fuel Lines and get y new wiring harness and this can be started! __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

03-20-2016, 05:07 PM	#231
69short Registered User Join Date: May 2012 Location: DeKalb, MO Posts: 508	Re: Roushinator's 72 C10 Stepside Restore/Build Great work. It's looking good. Clean build __________________ -Justin '69 SWB \| Zoie Jane \| Porterbuilt, LQ9, 20"/22" wheels

03-21-2016, 08:57 AM	#232
sperger72 Registered User Join Date: May 2015 Location: Whitehouse TX Posts: 132	Re: Roushinator's 72 C10 Stepside Restore/Build Ryan looks awesome. You could come help with my c10. Zach

03-21-2016, 09:47 AM	#233
sperger72 Registered User Join Date: May 2015 Location: Whitehouse TX Posts: 132	Re: Roushinator's 72 C10 Stepside Restore/Build Ryan looks awesome. You could come help with my c10. Zach

03-21-2016, 11:26 AM	#234
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Roushinator's 72 C10 Stepside Restore/Build Looking good! __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

03-29-2016, 02:10 PM	#236
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Changed up the fuel line up front. Went under instead of over. I think it looks better... Started running the fuel lines. This may change a little. More work this week.... __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

03-29-2016, 11:45 PM	#237
trkfrk Registered User Join Date: Jul 2010 Location: Las Vegas, NV Posts: 969	Re: Roushinator's 72 C10 Stepside Restore/Build I can't believe I haven't come across your build before now! Wow!! __________________ Mark 1972 C10 SWB LS1/T56 6 speed trans/4:56 posi with 5.5"-7" static drop/Boss 338 Wheels 18"x20" My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=424609. My first start up http://youtu.be/R899YQ1OcjU

03-30-2016, 02:20 PM	#238
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Roushinator's 72 C10 Stepside Restore/Build The front fuel line does look better routed under the throttlebody. Nice work! __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

03-31-2016, 01:52 AM	#239
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Roushinator's 72 C10 Stepside Restore/Build Nice work! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

04-10-2016, 04:52 PM	#240
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build So here is where i am going to mount my coil packs... Also i was not sure what this was at first but found it it is a steam port. Well it was on the wrong side for my new radiator so i relocated it... __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

04-11-2016, 05:14 PM	#241
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Roushinator's 72 C10 Stepside Restore/Build Nice! How are you running the plug wires, above or below the headers? Those steam port pieces look nice too! __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

04-12-2016, 04:07 PM	#242
sperger72 Registered User Join Date: May 2015 Location: Whitehouse TX Posts: 132	Re: Roushinator's 72 C10 Stepside Restore/Build Ryan, The Mac's engine left is the way to go. Just used it to install my sons LS in his 49. Awesome product. I am ready to see both of our trucks done. We both have a ways to go. I definitely do.



Register or Log In To remove these advertisements.

04-13-2016, 03:41 PM	#243
SMKN TA 95 Registered User Join Date: Sep 2014 Location: Wyanet, IL Posts: 179	Re: Roushinator's 72 C10 Stepside Restore/Build What did you end up using for a Power Steering reservoir? __________________ -1998 Formula WS6 1LE- LSX 427 4.58 @ 162 mph, 1.12 60' 2017 Silverado 3500 High Country DRW DMAX, 20" Fuel Wheels 1972 Chevrolet C10 Cheyenne - SOLD *RaceWire Solutions*

04-13-2016, 04:10 PM	#244
RRR18 Senior Member Join Date: Nov 2010 Location: Lordstown, OH / Wentzville, MO Posts: 870	Re: Roushinator's 72 C10 Stepside Restore/Build Damn __________________ '67 BAD IDEA Follow on Instagram https://www.instagram.com/rtimes3c10/ Ryan

05-17-2016, 09:30 AM	#245
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Not much going on lately but things will be moving fast here soon. But in the meantime i picked up some new items... New Custom Fender badges.. And Custom Valve Cover Insert... __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

05-17-2016, 10:03 AM	#246
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Roushinator's 72 C10 Stepside Restore/Build Awesome!!! __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

05-17-2016, 01:06 PM	#247
jwilb88 Registered User Join Date: May 2016 Location: Lucedale, Ms Posts: 61	Re: Roushinator's 72 C10 Stepside Restore/Build This thread is responsible for me ordering a complete set of mounts and cross members from PB fab today... Those mounts are sweet! __________________ 67 Short Step http://67-72chevytrucks.com/vboard/s...d.php?t=706656

05-24-2016, 09:33 PM	#249
FullThrottle Registered User Join Date: May 2016 Location: Lumberton, TX Posts: 1	Such a sweet restomod! I'm hoping to start on my '84 soon. Posted via Mobile Device

05-25-2016, 10:19 AM	#250
sperger72 Registered User Join Date: May 2015 Location: Whitehouse TX Posts: 132	Re: Roushinator's 72 C10 Stepside Restore/Build Ryan, Engine is looking great. What coil pack mounts are you using? We could use this idea on the 49 5 window truck. you can PM me if you would rather I have not had a lot of time to work on my 67, with oldest son's 49 and my wife's firebird starting. I do have my truck in the body shop getting slicked off and ready for paint.

Register or Log In To remove these advertisements.