1972 chevy LS-1 swap - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

twp1 · 10-04-2016, 09:16 PM

I will use cable and when I bought the engine the guy already programed the computer for this! I may change tanks but not sure at the moment and for the gauges he did a great job but I may not go that elaborate!!

twp1 · 10-11-2016, 10:02 PM

Getting closer!!! Putting in new wiring also added some photos of the process!

NRFD79 · 10-12-2016, 10:55 AM

I did this swap on a 57 chevy pickup. I used a set of Cast manifolds made by Hooker. They worked great and the nice thing is that they never leak like Headers. I painted them with high temp exhaust paint and they look great 4 years later. Thats my opinion. They dump back and followed the firewall body line which made the exhaust nice and easy to bend. I think i got them from Summit Racing for a couple hundred.. Good luck

hemi43 · 10-12-2016, 11:07 AM

Good choice on going the drive by cable route. I used the drive by wire on my build and I don't like the pedal feel.

**7D2N** · 10-20-2016, 08:28 PM

That is a very nice truck, thank you for posting your build. I am leaning toward an LS motor for mine.

Thanks
7D2N

twp1 · 10-26-2016, 10:04 PM

Ask Hemi43 questions he has a lot of answers!!!

hemi43 · 10-27-2016, 01:21 PM

Quote:

Originally Posted by twp1

Ask Hemi43 questions he has a lot of answers!!!

Hmmm... Not sure how to take that comment?

twp1 · 10-27-2016, 08:20 PM

Compliment!! You did a very nice LS build!!!!

hemi43 · 10-27-2016, 11:41 PM

Quote:

Originally Posted by twp1

Compliment!! You did a very nice LS build!!!!

Thanks TWP, much appreciated. I'm enjoying your build and the quality work that you've put into it. I was so close to choosing that color for my truck, but made a last minute change. I love orange for these trucks.

68c10airstream · 10-28-2016, 06:27 AM

GM man, i did the ls1 nova cluster in my 68c10 ls swap and one of my favorite items to blend old with new. The factory dash since i had my first 69 c20 in high school was a favorite. Remember that the ls spins higher than the 5,000 stock tach can handle and you need this 8,000 rpm tach conversion kit in hand BEFORE you start the ls1nova cluster job because the lens for the 8K tach has to be modified for new speedo numbers.

You most likely will have an issue with the tach working correctly being driven from your pcm. My gm pcm #411 got sent to a member here under the avatar name of "CRITTER". He runs lone star dyno in texas and was fantastic to deal with this issue.

10-04-2016, 09:16 PM	#51
twp1 Registered User Join Date: Aug 2014 Location: Arkansas Posts: 351	Re: 1972 chevy LS-1 swap I will use cable and when I bought the engine the guy already programed the computer for this! I may change tanks but not sure at the moment and for the gauges he did a great job but I may not go that elaborate!!

10-11-2016, 10:02 PM	#52
twp1 Registered User Join Date: Aug 2014 Location: Arkansas Posts: 351	Re: 1972 chevy LS-1 swap Getting closer!!! Putting in new wiring also added some photos of the process! Attached Images

10-12-2016, 10:55 AM	#53
NRFD79 Registered User Join Date: Jul 2016 Location: Wi Posts: 46	Re: 1972 chevy LS-1 swap I did this swap on a 57 chevy pickup. I used a set of Cast manifolds made by Hooker. They worked great and the nice thing is that they never leak like Headers. I painted them with high temp exhaust paint and they look great 4 years later. Thats my opinion. They dump back and followed the firewall body line which made the exhaust nice and easy to bend. I think i got them from Summit Racing for a couple hundred.. Good luck

10-12-2016, 11:07 AM	#54
hemi43 Registered User Join Date: Mar 2015 Location: Ontario Canada Posts: 1,499	Re: 1972 chevy LS-1 swap Good choice on going the drive by cable route. I used the drive by wire on my build and I don't like the pedal feel.

10-20-2016, 08:28 PM	#55
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 645	Re: 1972 chevy LS-1 swap That is a very nice truck, thank you for posting your build. I am leaning toward an LS motor for mine. Thanks 7D2N __________________ Just for the fun of it

10-26-2016, 10:04 PM	#56
twp1 Registered User Join Date: Aug 2014 Location: Arkansas Posts: 351	Re: 1972 chevy LS-1 swap Ask Hemi43 questions he has a lot of answers!!!

10-27-2016, 08:20 PM	#58
twp1 Registered User Join Date: Aug 2014 Location: Arkansas Posts: 351	Re: 1972 chevy LS-1 swap Compliment!! You did a very nice LS build!!!!

10-28-2016, 06:27 AM	#60
68c10airstream Registered User Join Date: Mar 2013 Location: Marquette michigan Posts: 828	Re: 1972 chevy LS-1 swap GM man, i did the ls1 nova cluster in my 68c10 ls swap and one of my favorite items to blend old with new. The factory dash since i had my first 69 c20 in high school was a favorite. Remember that the ls spins higher than the 5,000 stock tach can handle and you need this 8,000 rpm tach conversion kit in hand BEFORE you start the ls1nova cluster job because the lens for the 8K tach has to be modified for new speedo numbers. You most likely will have an issue with the tach working correctly being driven from your pcm. My gm pcm #411 got sent to a member here under the avatar name of "CRITTER". He runs lone star dyno in texas and was fantastic to deal with this issue.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.