The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-30-2017, 02:53 AM   #1
wazzabie
Registered User
 
Join Date: Dec 2011
Location: WA
Posts: 24
front floor support brace can this be welded?

I'm replacing the rockers and inner rockers on a k5 blazer. Part of my front floor support was rusted so I cut it out. I'm trying to patch the floor support. I've welded in a small patch as show in the photo and have a larger piece to complete it. I'm debating if I should try to save this or go with a new front floor support. My concern is getting into the joint and getting things misaligned. Your thoughts? Is patching this floor support going to work? Also if I decide to take the front floor support brace out what is the best way to remove it?

wazzabie is offline   Reply With Quote
Old 09-12-2017, 11:24 PM   #2
Ddkeeler
Registered User
 
Join Date: Apr 2017
Location: Bellevue
Posts: 3
Re: front floor support brace can this be welded?

So the part in the picture you cut off is the cab support, they make replacement full supports or they make slip over cover braces for them. In your case I would get those slip overs, they are cheap and fit right over the others. Just drills some holes and plug weld them to the other brace and the floor. As far as the upper brace. You will have to drill out a number of spot welds, which can be done from inside the cab and underneath the firewall in the engine bay. Just make a cut across the support where you want to remove it at and drill all spot welds above your cut. If it were me while you are replacing all that, I'd get a new brace and full support jack up the cab and replace them. And new body mounts wouldn't be a bad thing at that time.
Ddkeeler is offline   Reply With Quote
Old 09-13-2017, 12:34 PM   #3
daddyjeep
Registered User
 
daddyjeep's Avatar
 
Join Date: Nov 2015
Location: Smethport, PA
Posts: 773
Re: front floor support brace can this be welded?

yep... what he said. Slip on is the way to go since what you have left is in good shape.
__________________
85 K30 crew cab dually - Project http://67-72chevytrucks.com/vboard/s...d.php?t=694939
87 Wrangler Rock Crawler - Reason for the project http://www.wranglerforum.com/f330/da...ld-122601.html
daddyjeep is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:40 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com