The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Info Center > FAQ Truck Tech > Suspension, Steering and Brakes > Wheels and Tires

Web 67-72chevytrucks.com


Closed Thread
 
Thread Tools Display Modes
Old 03-11-2005, 03:13 PM   #1
krue
Designated A-hole!
 
krue's Avatar
 
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,343
71cadc10's backspacing explanation

backspacing tells you the location of the wheel mounting surface from the inside edge of the wheel.

to measure it, you would take a rim w/o tire and lay it flat with backside facing up. Lay a straight edge across the back. Measure from the straight edge down to the surface that touches the rotor or drum when bolted up. Subtract from this the distance from the edge of the rim to the "bead" or lip where the tire would mount.

So for intance on a 8" wide wheel (8" width is measured from bead to bead), a 4" backspace means the mounting flange is exactly centered.

8" wheel w/ 3" backspace would have a deeper dish look to it from the outside.

8" wheel w/ 6" backspace would have a very shallow look to it (like most front drive cars).

much often used and confused is "offset" also. Offset is simply the difference from the mounting surface to the center of the wheel width.
so using the above examples, a 8" wheel w/ 4" backspace has zero offset

8" wide wheel w/ 3" backspace has 1" negative offset

8" wheel w/ 6" backspace has 2" positive offset
__________________
"If it ain't broke, fix it 'til it is!"
Being stupid ain't illegal.

We're Still Debt Free Except for the House!!!
www.daveramsey.com

70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e
96 S-10 "Pop's Truck"
krue is offline  
Old 05-16-2005, 02:42 PM   #2
Chris H
72 C30 Trailer Queen
 
Chris H's Avatar
 
Join Date: Dec 1999
Location: SE MN, USA
Posts: 794
Here is a good visual explanation of wheel measurements:
http://www.rsracing.com/tech-wheel.html
Chris H is offline  
Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:53 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com