08-05-2018, 08:22 PM | #1 |
Senior Member
Join Date: Feb 2012
Location: chillicothe, illinois
Posts: 688
|
67 cowl hood
Advice on fixing these hood problems. The fenders are more straight and the hood has a arch to it, the hood is lower than the cowl and the hood touches the cowl but is flush with the front of the fenders, i thought about 10 or 12 cut down the side of the hood then pushing the hood down level and weldind the cuts back together, the cowl height problem i thoufht about cutting the rear brace and pushung it up and rewelding the brace and the last i guess i would just cut 1/4 inch off the back of the hood and edge weld it all back together. Any thought or has someone had these same issues and have good advice on the modification?
|
Bookmarks |
|
|