Where can I find seats? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AU Doc · 01-18-2024, 11:51 AM

I'm looking for a bench seat for a '68, and I'm wondering what others are doing if they need to replace a seat completely? I have a frame that I could probably make work with a little fabrication, but that is going to take time that I could spend on something else to get it on the road.

Are there aftermarket seats available for a reasonable price?

LMC has some aftermarket seats, but they are black. I was hoping to go back with the original light blue, and I would actually prefer a stock seat.

IIGW · 01-18-2024, 12:08 PM

Quote:

Originally Posted by AU Doc

Are there aftermarket seats available for a reasonable price?.

I have used TMI on several of the builds throughout the years.
GREAT PRODUCTS

https://www.tmiproducts.com/

You get what you pay for, check their entire site, some initial prices will burn the retinas

AU Doc · 01-18-2024, 04:35 PM

Quote:

Originally Posted by IIGW

I have used TMI on several of the builds throughout the years.
GREAT PRODUCTS

https://www.tmiproducts.com/

You get what you pay for, check their entire site, some initial prices will burn the retinas

I have looked at their stuff before, but like you said, it's pricey! Not saying it's not worth it, but I'm putting it in the context of looking for a stock replacement rather than wanting an updated aftermarket piece.

I suppose the counter argument is most stock seats are going to require recovering and new padding, which is pushes the price on up there, too. Assuming I could even find a factory seat frame in good enough condition.

**HO455** · 01-18-2024, 04:49 PM

You could look here for ideas?

http://67-72chevytrucks.com/vboard/s...d.php?t=613744

Lots of OE swaps.

Seat frames are good projects to build up fabrication skills and you can make custom modifications to give your interior a one of a kind look. Although those usually involve custom upholstery over factory seat covers you install for additional cost savings.

Myself · 01-19-2024, 11:21 AM

I gave a pretty decent one away 3 weeks ago!

**Black Diamond Dave** · 01-20-2024, 12:33 PM

Just installed these last night in my 71 short bed K10. Really like them. They're from Qualatex. The center is a jump seat/ storage console. It also has storage under the center seat.

**HWY-STAR** · 01-20-2024, 01:40 PM

I would check out a few swap meets. I read on here there is one coming up in Nashvill. Good luck.

dmack91 · 01-20-2024, 02:08 PM

I put one from a squarebody in mine a couple weeks ago. Used the original brackets ans adapted the seat to them. Fairly easy and there are a lot more squarebody seats out there since they were mad for 15 years instead of 5.

**dmjlambert** · 01-20-2024, 07:24 PM

Quote:

Originally Posted by Black Diamond Dave

Just installed these last night in my 71 short bed K10. Really like them. They're from Qualatex. The center is a jump seat/ storage console. It also has storage under the center seat.

That Qualatex looks quite fantastic. Super duper.

HalfBrit · 01-21-2024, 05:11 AM

Quote:

Originally Posted by Black Diamond Dave

Just installed these last night in my 71 short bed K10. Really like them. They're from Qualatex. The center is a jump seat/ storage console. It also has storage under the center seat.

Did the adapter bracket allow everything to bolt in without modification?

**Black Diamond Dave** · 01-21-2024, 11:36 AM

Yes, with the exception of the jump seat. I had to drill new holes in the bracket to move it forward slightly due to the fact that I still have my tank in the cab.

HalfBrit · 01-21-2024, 01:24 PM

That really does seem to be a nice choice. If you get a chance, can you post some more pics? My '70 is a 4spd and was concerned about interference with the jump seat cushion front. I have the factory bench and thinking about going this route.

**Getter-Done** · 01-21-2024, 01:57 PM

Quote:

Originally Posted by AU Doc

I'm looking for a bench seat for a '68, and I'm wondering what others are doing if they need to replace a seat completely? I have a frame that I could probably make work with a little fabrication, but that is going to take time that I could spend on something else to get it on the road.

Are there aftermarket seats available for a reasonable price?

LMC has some aftermarket seats, but they are black. I was hoping to go back with the original light blue, and I would actually prefer a stock seat.

Quote:

Originally Posted by HWY-STAR

I would check out a few swap meets. I read on here there is one coming up in Nashville. Good luck.

There are 2 Swap Meet's coming up.

1st one at the Nashville Fairground's on Feb. 4th. link below.
Link: http://www.test.nashvilleexpocenter....toSwapMeet.asp

2nd one is March 2nd at the Lebanon Fairground's
Link: https://www.facebook.com/photo/?fbid...60744164200258

Name: sm.jpg
Views: 220
Size: 73.5 KB

**ghackett1** · 01-21-2024, 02:31 PM

Quote:

Originally Posted by AU Doc

I'm looking for a bench seat for a '68, and I'm wondering what others are doing if they need to replace a seat completely? I have a frame that I could probably make work with a little fabrication, but that is going to take time that I could spend on something else to get it on the road.

Are there aftermarket seats available for a reasonable price?

LMC has some aftermarket seats, but they are black. I was hoping to go back with the original light blue, and I would actually prefer a stock seat.

I found an original bench seat on Craigslist 3 hours away from me a couple of years ago. You should find an original eventually. Mine was complete and in great shape but I had it recovered.

**Black Diamond Dave** · 01-22-2024, 12:58 PM

Shifter just clears all but reverse

Reverse works but it is not fully engaged unless I lift the seat back. I will live with it until I relocate the gas tank.[IMG]file:///media/fuse/drivefs-7d8167c7d065c67ff635bb191b06d2d0/root/1971%20K10/Resized%20pictures%20-%201%20(1)[/IMG]

**Black Diamond Dave** · 01-22-2024, 01:12 PM

Quote:

Originally Posted by HalfBrit

That really does seem to be a nice choice. If you get a chance, can you post some more pics? My '70 is a 4spd and was concerned about interference with the jump seat cushion front. I have the factory bench and thinking about going this route.

Shifter just clears all but reverse

Reverse works but it is not fully engaged unless I lift the seat back. I will live with it until I relocate the gas tank.

Pic is 4th gear.

**425HP409** · 01-22-2024, 03:30 PM

Too bad you aren't closer tome as I have an original out of a 67 for free, needs covering.

MARKDTN · 01-22-2024, 05:53 PM

Quote:

Originally Posted by Getter-Done

There are 2 Swap Meet's coming up.

1st one at the Nashville Fairground's on Feb. 4th. link below.
Link: http://www.test.nashvilleexpocenter....toSwapMeet.asp

...

The AACA one in February usually has a great selection of stuff and usually lots of 67-72 parts.

If you don't care about stock, the 88-99 OBS trucks have pretty nice seats that are a bit thinner to get more belly room. I sometimes see decent ones in the pick-a-part here. I have one in a square body, but I hear they fit pretty well in these.

TotallyHucked · 01-23-2024, 03:38 PM

Another option would be SloshTubz, he has a Buddy Bucket setup with a nice fold down armrest/storage bin and has a lower storage bin as well. He sells the frame and foam, would just need the foam shaped and upholstery done

LS short box · 01-23-2024, 10:49 PM

Don't know if this works for you but on my 68 C10 I used 2012 VW GTI seats.
Recline and height adjustment.
They were $350 at a local salvage yard.
They were kind of a dark gray with plaid inserts. Wasn't digging the gray so I sprayed the fabric paint to black. I think they turned out great.
Pic.

01-18-2024, 11:51 AM	#1
AU Doc Registered User Join Date: Nov 2019 Location: LA - Lower Alabama Posts: 57	Where can I find seats? I'm looking for a bench seat for a '68, and I'm wondering what others are doing if they need to replace a seat completely? I have a frame that I could probably make work with a little fabrication, but that is going to take time that I could spend on something else to get it on the road. Are there aftermarket seats available for a reasonable price? LMC has some aftermarket seats, but they are black. I was hoping to go back with the original light blue, and I would actually prefer a stock seat.

01-18-2024, 04:49 PM	#4
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 10,808	Re: Where can I find seats? You could look here for ideas? http://67-72chevytrucks.com/vboard/s...d.php?t=613744 Lots of OE swaps. Seat frames are good projects to build up fabrication skills and you can make custom modifications to give your interior a one of a kind look. Although those usually involve custom upholstery over factory seat covers you install for additional cost savings. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban the WMB,1991 S(stink)-10 Blazer,1969 GTO, 1970 Javelin, 1952 F2 Ford 4X4, 29 Model A, 72 Firebird. 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

01-19-2024, 11:21 AM	#5
Myself Registered User Join Date: Oct 2005 Location: Northern Arkansas Posts: 1,127	Re: Where can I find seats? I gave a pretty decent one away 3 weeks ago!

01-20-2024, 12:33 PM	#6
Black Diamond Dave New Member Join Date: Oct 2023 Location: Nevada City, California Posts: 7	Re: Where can I find seats? Just installed these last night in my 71 short bed K10. Really like them. They're from Qualatex. The center is a jump seat/ storage console. It also has storage under the center seat. Attached Images

01-20-2024, 01:40 PM	#7
HWY-STAR Senior Member Join Date: Jan 2021 Location: South east Mn. Posts: 253	Re: Where can I find seats? I would check out a few swap meets. I read on here there is one coming up in Nashvill. Good luck. __________________ 72 sierra grande 402/400 72 longhorn 402/400 67 swb fleet side 350/350 buddy buckets tack/vac dash project 71 Cheyenne c20 350/350 all original except seat cover-SOLD 1970 GMC 3500 SRW 350 4 speed-FOR SALE 72 c-30 bb 4 speed dump bed 72 k-20 4x4 350/350 patina rat rod---sold 80 chevy p20 aluminum step van 350/400 12 ft cargo 62 parts car & 63 project nova, 4 door 6 cy 74 Honda cb 360 only 4000 miles

01-20-2024, 02:08 PM	#8
dmack91 Registered User Join Date: Jan 2011 Location: Redmond, OR Posts: 754	Re: Where can I find seats? I put one from a squarebody in mine a couple weeks ago. Used the original brackets ans adapted the seat to them. Fairly easy and there are a lot more squarebody seats out there since they were mad for 15 years instead of 5. __________________ 68 Chev C20- son has it now 83 K20 - bought from son 70 C20 - in progress

01-21-2024, 11:36 AM	#11
Black Diamond Dave New Member Join Date: Oct 2023 Location: Nevada City, California Posts: 7	Re: Where can I find seats? Yes, with the exception of the jump seat. I had to drill new holes in the bracket to move it forward slightly due to the fact that I still have my tank in the cab. __________________ "Patriotism is supporting your country all the time and your government when it deserves it." Mark Twain

01-21-2024, 01:24 PM	#12
HalfBrit Registered User Join Date: Feb 2021 Location: Kernersville, NC Posts: 84	Re: Where can I find seats? That really does seem to be a nice choice. If you get a chance, can you post some more pics? My '70 is a 4spd and was concerned about interference with the jump seat cushion front. I have the factory bench and thinking about going this route.

01-22-2024, 12:58 PM	#15
Black Diamond Dave New Member Join Date: Oct 2023 Location: Nevada City, California Posts: 7	Re: Where can I find seats? Shifter just clears all but reverse Reverse works but it is not fully engaged unless I lift the seat back. I will live with it until I relocate the gas tank.[IMG]file:///media/fuse/drivefs-7d8167c7d065c67ff635bb191b06d2d0/root/1971%20K10/Resized%20pictures%20-%201%20(1)[/IMG] __________________ "Patriotism is supporting your country all the time and your government when it deserves it." Mark Twain

01-22-2024, 03:30 PM	#17
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 834	Re: Where can I find seats? Too bad you aren't closer tome as I have an original out of a 67 for free, needs covering. __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

01-23-2024, 03:38 PM	#19
TotallyHucked Registered User Join Date: Feb 2020 Location: Gainesville, Ga Posts: 96	Re: Where can I find seats? Another option would be SloshTubz, he has a Buddy Bucket setup with a nice fold down armrest/storage bin and has a lower storage bin as well. He sells the frame and foam, would just need the foam shaped and upholstery done __________________ 1985 GMC Sierra Classic Chopped down wrongbed Cammed LH6 5.3/T56/3.90 Walker Tuned 5/8 drop US Mags

01-23-2024, 10:49 PM	#20
LS short box Registered User Join Date: Jun 2015 Location: Carlos MN Posts: 1,924	Re: Where can I find seats? Don't know if this works for you but on my 68 C10 I used 2012 VW GTI seats. Recline and height adjustment. They were $350 at a local salvage yard. They were kind of a dark gray with plaid inserts. Wasn't digging the gray so I sprayed the fabric paint to black. I think they turned out great. Pic. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.