K5 interior - The 1947 - Present Chevrolet & GMC Truck Message Board Network

driesterer · 09-07-2012, 03:01 PM

Hi all,
I am looking for the interior upholstered side panels for the back of a 78 Chev Blazer 4x4. Anyone know where I can find a set? Does anyong make new replacement sets?
Thanks
D

tvblazer78 · 09-18-2012, 07:15 PM

Quote:

Originally Posted by driesterer

Hi all,
I am looking for the interior upholstered side panels for the back of a 78 Chev Blazer 4x4. Anyone know where I can find a set? Does anyong make new replacement sets?
Thanks
D

Sorry man you will have to make some and cover them, no one makes them..

riz · 09-18-2012, 07:57 PM

Brothers has them but they are stupid expensive. Better off making your own.

RIZ
Posted via Mobile Device

motornut · 10-01-2012, 10:52 PM

i was going to make some for the 78
using thin plywood 1/8th ,the cardboard gets to soft
my 88 conversion burb was like this in the back,material stretched over it,seemed a simple idea
trace out the old one,stain and clear if you like wood

toeb · 10-01-2012, 11:11 PM

Quote:

Originally Posted by motornut

i was going to make some for the 78
using thin plywood 1/8th ,the cardboard gets to soft
my 88 conversion burb was like this in the back,material stretched over it,seemed a simple idea
trace out the old one,stain and clear if you like wood

This is what I did. just made my own and covered them with black automotive carpet. Worked out nice and the black goes great with the gray on my seats and floor carpet.
Posted via Mobile Device

1Bad65GMC · 10-04-2012, 03:46 PM

I'm a little late for this but I have been pulling parts from a Suburban. I pulled the ones fronm the back of it. Measured them out for the back of my Jimmy, trimmed them and used those.

motornut · 10-04-2012, 08:49 PM

Quote:

Originally Posted by 1Bad65GMC

I'm a little late for this but I have been pulling parts from a Suburban. I pulled the ones fronm the back of it. Measured them out for the back of my Jimmy, trimmed them and used those.

Good idea
Posted via Mobile Device

09-07-2012, 03:01 PM	#1
driesterer Registered User Join Date: Sep 2012 Location: Pittsford, VT Posts: 4	K5 interior Hi all, I am looking for the interior upholstered side panels for the back of a 78 Chev Blazer 4x4. Anyone know where I can find a set? Does anyong make new replacement sets? Thanks D

09-18-2012, 07:57 PM	#3
riz Registered User Join Date: Oct 2011 Location: hudson,wi Posts: 805	Re: K5 interior Brothers has them but they are stupid expensive. Better off making your own. RIZ Posted via Mobile Device

10-01-2012, 10:52 PM	#4
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: K5 interior i was going to make some for the 78 using thin plywood 1/8th ,the cardboard gets to soft my 88 conversion burb was like this in the back,material stretched over it,seemed a simple idea trace out the old one,stain and clear if you like wood __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

10-04-2012, 03:46 PM	#6
1Bad65GMC Registered User Join Date: Oct 2011 Location: Sacramento, Calif Posts: 70	Re: K5 interior I'm a little late for this but I have been pulling parts from a Suburban. I pulled the ones fronm the back of it. Measured them out for the back of my Jimmy, trimmed them and used those. __________________ 1998 GMC Suburban 2500 454 4X4 1984 GMC Jimmy - 3/4 ton axles, 5.7TBI 1990 GMC Suburban (Parts Donor) scrapped 1965 Buick Riviera - (Sold) 1999 Mercury Grand Marquis 1965 GMC SBSS (Sold)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.