|
08-04-2018, 06:18 PM
|
#1 |
|
Registered User
Join Date: Aug 2018
Location: Taber, AB
Posts: 1
|
47 GMC Front Axle
Currently building a 47 GMC. Truck body and frame is a Two Ton and I am wondering if anyone has used a front axle from a two ton and put 1/2 ton spindles on it. If so was there anything you had to modify or are the king pins the same. Any advice would be good, do not want to change the straight axle out if I do not have to
|
|
|
|
08-04-2018, 06:51 PM
|
#2 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,281
|
Re: 47 GMC Front Axle
The big truck king pins are quite a bit larger .
Scroll down to page 77 and you will find the specs on the front axle and king pins. https://www.gmheritagecenter.com/doc...olet-Truck.pdf Save that link as you will want to go back to it every so often
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
