Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
10-17-2017, 01:57 PM | #1 |
Senior Member
Join Date: Feb 2010
Location: Falls City, Nebraska "100 Miles From Nowhere"
Posts: 2,219
|
Rams Horn Manifold Flared Flange
Does anybody know where to order the 2-1/4" down pipe flare connector flange? Here's a pic,
__________________
Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American" |
10-17-2017, 02:26 PM | #2 |
Senior Member
Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,794
|
Re: Rams Horn Manifold Flared Flange
Mine are 2 1/2, but I ordered them from Speedway.
__________________
I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson |
10-17-2017, 02:41 PM | #3 |
Senior Member
Join Date: Feb 2010
Location: Falls City, Nebraska "100 Miles From Nowhere"
Posts: 2,219
|
Re: Rams Horn Manifold Flared Flange
Cool, Thanks Truckster I'll go to their website now. These are for the standard 2" rams horns and if I'm not mistaken the 72 C/10 350 factory downpipes were 2-1/4" with the three flange holes/stud centers at 2-3/4"...These things are proving too be scarce as hens teeth! Classic Industries has them 1957 Belair but I'm afraid they're the smaller 2" versions...Thanks again man, I'll keep you updated...
__________________
Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American" |
10-30-2017, 08:46 PM | #4 |
Senior Member
Join Date: Feb 2010
Location: Falls City, Nebraska "100 Miles From Nowhere"
Posts: 2,219
|
Re: Rams Horn Manifold Flared Flange
Well it all boiled down to my being mistaken on the factory exhaust size. It's 2" instead of 2-1/4"...So with that being said and not wanting to trash the 2-1/4" pipe I've already had bent and flared, I opted for these...They fit the 2" manifolds w/2-3/4" stud centers, yet allow for the use of 2-1/4" OD flared pipe. $16 shipped...So now the 67 C/10 350/M22 will have 2-1/4" downpipes into 2-1/2" turbo mufflers...
__________________
Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American" |
Bookmarks |
|
|