1972 2wd Blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hvacfatboy · 10-11-2011, 09:48 PM

Hi I am new to this forum but I have purchased a 1972 2wd Blazer that is going to need quite a few replacement panels. I have already purchased the fenders, rocker panels, inner rocker panel, the rocker boxes, rocker box end plates and support. What I am going to need is to find floor pan other than patch panels for the front, and a bed floor, from what I have seen the shortbed truck bed floor is to long any ideas or suggestions will be greatly appreciated. Thanks will download pix soon.

99-LS1-SS · 10-12-2011, 08:44 AM

I don't know of anyone that sells a Blazer floor pan. I bought a truck floor pan from GMC Paul's and I can use about 85% of it.

Here's the page that the floor pan is on. It's the 6th item down on the list.
http://www.gmcpauls.com/Patch_Panels.htm

jaros44sr · 10-12-2011, 10:01 AM

If you go with a full floor pan, which would a good choice, make sure you get one with the forward seat brace. The one pictured doesnt have one

Welcome to the boards

99-LS1-SS · 10-12-2011, 10:10 AM

Who sells full Blazer floor pans?

hvacfatboy · 10-15-2011, 09:46 PM

Hey thanks for the info. Would like to know if i should weld in support braces in the door openings and across the bed to keep things in place when i start the replacement of the rocker boxes and floor pan patch panels. Also looking at using a rotissereie that a friend has to do this work will this help everything stay inline? thanks for everyones input on this

99-LS1-SS · 10-16-2011, 08:55 AM

If you want to be safe I would brace the tub. If you are going to use a rotisserie, I would brace it for sure.

PHAT TONY · 12-03-2011, 10:55 PM

What's going on here? Progress pictures?

**Nobby** · 12-07-2011, 09:16 PM

Hey hvac,I replaced my front floor with a cab floor and the bed part with a rust free short bed floor.I can dig up some pics if it will help.

hvacfatboy · 12-07-2011, 10:30 PM

Quote:

Originally Posted by Nobby

Hey hvac,I replaced my front floor with a cab floor and the bed part with a rust free short bed floor.I can dig up some pics if it will help.

Hey nobby thanks for the info if you have any pix that would be very helpful. Thanks for any info/help

**Nobby** · 12-07-2011, 10:47 PM

I actually used some of the truck floor and two new floor pans. I cut the bad part off the back of the blazer and measured the truck floor and cut and welded. O yea it's easier with the quarters off.

**Nobby** · 12-07-2011, 10:50 PM

a couple more

tubbedII · 01-13-2012, 05:21 PM

3 months and the only pics of this project are from another ride?...What's going on here?! Haha...let us see what ya got hvac...any progress?

VA72C10 · 01-16-2012, 09:00 PM

in "if" this build takes place

YBNORML · 01-17-2012, 12:08 AM

I'm in too, I love seeing these puppies come back from the dead!

10-11-2011, 09:48 PM	#1
hvacfatboy Registered User Join Date: Oct 2011 Location: Timberlake NC Posts: 397	1972 2wd Blazer Hi I am new to this forum but I have purchased a 1972 2wd Blazer that is going to need quite a few replacement panels. I have already purchased the fenders, rocker panels, inner rocker panel, the rocker boxes, rocker box end plates and support. What I am going to need is to find floor pan other than patch panels for the front, and a bed floor, from what I have seen the shortbed truck bed floor is to long any ideas or suggestions will be greatly appreciated. Thanks will download pix soon.

10-12-2011, 08:44 AM	#2
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: 1972 2wd Blazer I don't know of anyone that sells a Blazer floor pan. I bought a truck floor pan from GMC Paul's and I can use about 85% of it. Here's the page that the floor pan is on. It's the 6th item down on the list. http://www.gmcpauls.com/Patch_Panels.htm

10-12-2011, 10:01 AM	#3
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: 1972 2wd Blazer If you go with a full floor pan, which would a good choice, make sure you get one with the forward seat brace. The one pictured doesnt have one Welcome to the boards __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

10-12-2011, 10:10 AM	#4
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: 1972 2wd Blazer Who sells full Blazer floor pans?

10-15-2011, 09:46 PM	#5
hvacfatboy Registered User Join Date: Oct 2011 Location: Timberlake NC Posts: 397	Re: 1972 2wd Blazer Hey thanks for the info. Would like to know if i should weld in support braces in the door openings and across the bed to keep things in place when i start the replacement of the rocker boxes and floor pan patch panels. Also looking at using a rotissereie that a friend has to do this work will this help everything stay inline? thanks for everyones input on this

10-16-2011, 08:55 AM	#6
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: 1972 2wd Blazer If you want to be safe I would brace the tub. If you are going to use a rotisserie, I would brace it for sure.

12-03-2011, 10:55 PM	#7
PHAT TONY Registered User Join Date: Aug 2008 Location: Red Deer ab canada Posts: 1,250	Re: 1972 2wd Blazer What's going on here? Progress pictures? __________________ 1972 factory 2 Wheel Drive Blazer-Sold 1972 K10 4X4-Sold 1971 Chevrolet Cheyenne/10-Sold 1970 Chevrolet C/10-Sold 1968 GMC 4X4-Project 1968 Chevrolet C/10 Pro Street 1970 GMC 3/4 Ton-Parts 1997 2WD 2DR Yukon-Sweet http://67-72chevytrucks.com/vboard/s...d.php?t=335664

12-07-2011, 09:16 PM	#8
Nobby Senior Member Join Date: Feb 2005 Location: St. Amant Louisiana Posts: 840	Re: 1972 2wd Blazer Hey hvac,I replaced my front floor with a cab floor and the bed part with a rust free short bed floor.I can dig up some pics if it will help.

12-07-2011, 10:47 PM	#10
Nobby Senior Member Join Date: Feb 2005 Location: St. Amant Louisiana Posts: 840	Re: 1972 2wd Blazer I actually used some of the truck floor and two new floor pans. I cut the bad part off the back of the blazer and measured the truck floor and cut and welded. O yea it's easier with the quarters off. Attached Images

12-07-2011, 10:50 PM	#11
Nobby Senior Member Join Date: Feb 2005 Location: St. Amant Louisiana Posts: 840	Re: 1972 2wd Blazer a couple more Attached Images

01-13-2012, 05:21 PM	#12
tubbedII needs more $$$ Join Date: Mar 2004 Location: Sacramento Posts: 1,936	Re: 1972 2wd Blazer 3 months and the only pics of this project are from another ride?...What's going on here?! Haha...let us see what ya got hvac...any progress? __________________ 1970 2wd Blazer

01-16-2012, 09:00 PM	#13
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1972 2wd Blazer in "if" this build takes place __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-17-2012, 12:08 AM	#14
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,847	Re: 1972 2wd Blazer I'm in too, I love seeing these puppies come back from the dead! __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.