What did you do to your truck today? Chapter II - Page 125 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Econman · 01-04-2016, 05:14 PM

Dropped mine off for rust & metal repair before heading to media blaster. Getting blasted after the inner cowl and rockers come off, then primed..

88fordf150 · 01-04-2016, 06:14 PM

New pins, bronze bushings and powder coating for my door hinges.

Possmguts · 01-04-2016, 07:16 PM

Quote:

Originally Posted by 88fordf150

New pins, bronze bushings and powder coating for my door hinges.

I need to be doing this but I have to replace the uppers... the door stops are missing...

72c105speed · 01-04-2016, 07:24 PM

Econman do you have a build thread?

Trying to figure out where that rust is and how you go about fixing the windshield frame

Gonepostal · 01-04-2016, 07:35 PM

Found a real problem

88fordf150 · 01-04-2016, 07:37 PM

Quote:

Originally Posted by Possmguts

I need to be doing this but I have to replace the uppers... the door stops are missing...

Nope, they are on.

88fordf150 · 01-04-2016, 07:40 PM

Quote:

Originally Posted by Possmguts

I need to be doing this but I have to replace the uppers... the door stops are missing...

Oh, you meant yours are missing. Classic Parts sells a door stop rebuild kit.

74baggedbug · 01-05-2016, 02:59 PM

Added a usb charging port behind my seat so I can charge my phone if need be

73737373 · 01-05-2016, 05:15 PM

More cleaning....before and after. Seat is next project.

JMD · 01-07-2016, 09:18 PM

Got the cab sand blasted and dropped it off to get sealed. Dreading the bodywork already.

GTSideSwipe · 01-07-2016, 09:33 PM

Quote:

Originally Posted by Possmguts

You can buy the colored film to get that tach to match the other gauges...

Thanks for the tip! Where could I get some and what would you recommend?

88fordf150 · 01-08-2016, 07:45 PM

Quote:

Originally Posted by JMD

Got the cab sand blasted and dropped it off to get sealed. Dreading the bodywork already.

I see your tags are on the passenger side pillar?? Mine are on the drivers side. Did the factory change the location?

In The Ten Ring · 01-08-2016, 07:51 PM

Quote:

Originally Posted by JMD

Got the cab sand blasted and dropped it off to get sealed. Dreading the bodywork already.

We should call our trucks "BOAT's" as in BUST OUT ANOTHER THOUSAND.

I received my newly polished headlight surrounds from the metal polisher today. Even my mom was impressed and she hates my truck! (Dad loved them though).

Possmguts · 01-08-2016, 08:04 PM

Quote:

Originally Posted by 88fordf150

I see your tags are on the passenger side pillar?? Mine are on the drivers side. Did the factory change the location?

the pic is flipped lol

88fordf150 · 01-08-2016, 08:18 PM

Quote:

Originally Posted by Possmguts

the pic is flipped lol

After I posted I noticed it was a right hand steer. lol

Possmguts · 01-08-2016, 10:12 PM

Quote:

Originally Posted by 88fordf150

After I posted I noticed it was a right hand steer. lol

I was about to comment on it being right hand drive and then I saw the poster in the background lol

CST10 · 01-08-2016, 10:59 PM

I changed the blower fan motor, fan switch and the fan circuit switch behind the glovebox on ol Goldilocks today. Getting ready for a morning biscuit run.

JMD · 01-09-2016, 12:58 AM

Quote:

Originally Posted by Possmguts

the pic is flipped lol

Just noticed that myself! I'm not sure why my phone did that...

Another set back on the new brake lines and rear disk swap. Tried to install the braided line on the rear axle only to find out the line runs directly into the leaf springs

colgad · 01-09-2016, 01:09 AM

Quote:

Originally Posted by JMD

Just noticed that myself! I'm not sure why my phone did that...

Another set back on the new brake lines and rear disk swap. Tried to install the braided line on the rear axle only to find out the line runs directly into the leaf springs

You just need a 90 adapter, all done!
http://www.ebay.com/itm/Fragola-4981...-/390612526505

JMD · 01-09-2016, 01:23 AM

Quote:

Originally Posted by colgad

You just need a 90 adapter, all done!
http://www.ebay.com/itm/Fragola-4981...-/390612526505

Yup! I have a pair on order to be picked up on Monday. I was just hoping to done with the brake lines this weekend.

colgad · 01-09-2016, 01:28 AM

Quote:

Originally Posted by JMD

Yup! I have a pair on order to be picked up on Monday. I was just hoping to done with the brake lines this weekend.

I understand, not having the right parts when you need them is a pain. I have a company here in Tampa that has any and all things for hose repair and replacement. AN fittings, adapters you name it. Amazon Hose, they are the best people to work with. There moto is we are not here to sell you hose, we are here to fix your problem.

Looks like your almost done with the brakes! Looking good.

Possmguts · 01-09-2016, 02:20 AM

Quote:

Originally Posted by 88fordf150

Oh, you meant yours are missing. Classic Parts sells a door stop rebuild kit.

Thanks, Ill look into it.. gotta be cheaper Im sure

tommy3horse · 01-09-2016, 02:12 PM

Hello, got the new Firestone Destination A/T 31x1050's installed...just in time for the first snow. It looks a lil high in back but I think that increases the cool factor..
Also, I have been gathering up all the brackets and clamps to install a factory sway bar, that too should increase the grins per gallon quest.

tommy3horse · 01-09-2016, 02:16 PM

Sway bar stuff ready to go, just waiting on a warm day, might be spring before I can install?

Tom

berch 69GMC · 01-09-2016, 06:50 PM

Put on me new to me torq thrust ST's and 20 in. tires.

01-04-2016, 05:14 PM	#3101
Econman Registered User Join Date: Feb 2011 Location: Knoxville, TN Posts: 362	Re: What did you do to your truck today? Chapter II Dropped mine off for rust & metal repair before heading to media blaster. Getting blasted after the inner cowl and rockers come off, then primed.. Attached Images Last edited by Econman; 01-04-2016 at 05:19 PM.

01-04-2016, 06:14 PM	#3102
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 473	Re: What did you do to your truck today? Chapter II New pins, bronze bushings and powder coating for my door hinges. Attached Images __________________ Brad handshoe

01-04-2016, 07:24 PM	#3104
72c105speed Registered User Join Date: Oct 2015 Location: Kentucky Posts: 172	Re: What did you do to your truck today? Chapter II Econman do you have a build thread? Trying to figure out where that rust is and how you go about fixing the windshield frame

01-04-2016, 07:35 PM	#3105
Gonepostal Registered User Join Date: Jun 2012 Location: Mobile Al Posts: 103	Re: What did you do to your truck today? Chapter II Found a real problem Attached Images __________________ US Army Bomb Squad 83-96 There is no problem that a suitable amount of explosives cannot solve

01-05-2016, 02:59 PM	#3108
74baggedbug Registered User Join Date: Oct 2011 Location: Houston tx Posts: 699	Re: What did you do to your truck today? Chapter II Added a usb charging port behind my seat so I can charge my phone if need be

01-05-2016, 05:15 PM	#3109
73737373 Registered User Join Date: Sep 2005 Location: Oklahoma USA Posts: 1,000	Re: What did you do to your truck today? Chapter II More cleaning....before and after. Seat is next project. Attached Images

01-07-2016, 09:18 PM	#3110
JMD Registered User Join Date: Jun 2013 Location: Grand Rapids Michigan Posts: 291	Re: What did you do to your truck today? Chapter II Got the cab sand blasted and dropped it off to get sealed. Dreading the bodywork already. Attached Images

01-08-2016, 10:59 PM	#3117
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: What did you do to your truck today? Chapter II I changed the blower fan motor, fan switch and the fan circuit switch behind the glovebox on ol Goldilocks today. Getting ready for a morning biscuit run. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

01-09-2016, 02:12 PM	#3123
tommy3horse Registered User Join Date: Feb 2015 Location: St. Clair, Missouri Posts: 120	Re: What did you do to your truck today? Chapter II Hello, got the new Firestone Destination A/T 31x1050's installed...just in time for the first snow. It looks a lil high in back but I think that increases the cool factor.. Also, I have been gathering up all the brackets and clamps to install a factory sway bar, that too should increase the grins per gallon quest. Attached Images __________________ 1972 GMC C1500 350/350 1965 Mustang 2+2 289 4spd, show-car 1965 Mustang Coupe 289 4spd, stoplight racer 1/2 dozen Wheelhorse Tractors

01-09-2016, 02:16 PM	#3124
tommy3horse Registered User Join Date: Feb 2015 Location: St. Clair, Missouri Posts: 120	Re: What did you do to your truck today? Chapter II Sway bar stuff ready to go, just waiting on a warm day, might be spring before I can install? Tom Attached Images __________________ 1972 GMC C1500 350/350 1965 Mustang 2+2 289 4spd, show-car 1965 Mustang Coupe 289 4spd, stoplight racer 1/2 dozen Wheelhorse Tractors

01-09-2016, 06:50 PM	#3125
berch 69GMC Registered User Join Date: Jan 2015 Location: Boynton bch, FL Posts: 187	Re: What did you do to your truck today? Chapter II Put on me new to me torq thrust ST's and 20 in. tires. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.