what filler neck to use ?

[blazer2007]

I,m changing my filler neck on a 78 which doesn,t have a door to a donor one with a door but don,t know which filler neck I need for a blazer.Nothing in the junk yards to look at.I don,t how it is supposed to mount inside.

[gclark1]

I am pretty sure that most Chevy necks are pretty generic. I used a neck and door off of a 2006 Silverado, and where the neck mounts to the quarter just bolted on with 3 screws. I did have to change the "tunnel" that is on the inside of the quarter because the angle on the 06 is different, but it was not a huge issue.

[blazer2007]

does the filler neck mount to the inside panel ?

[eighteenninetytwo]

What do you need to get the door and associated parts out of a vehicle at the pick n pull. I want to do this before I get the thing painted. Pick n pull doesn't allow power tools though. bright ideas? What do i take with me, just a big a$$ed chisel and hammer?

[cobra20]

Pick n Pull may actually cut out what you need

[68Timber]

I'll make some pics of my 79 filler door for you this weekend but basically you're going to have to do what gclark did. I don't think anything mounts to the inner panel but will verify.

[KrazyRay]

I have an 87 here with the filler neck and door. I can cut a patch panel around the door and send the whole package...neck, mounting hardware, door, and patch panel if any one is interested.

[eighteenninetytwo]

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

[KrazyRay]

This 87 filler is in good shape, but dirty.

[eighteenninetytwo]

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

[eighteenninetytwo]

What is that extra wee tube off the side of the neck in the last picture? I don't have one of those on my 75 gas filler??

[KrazyRay]

Its a vent tube.

[68Timber]

Originally Posted by eighteenninetytwo

Pm sent re this. I live in the bay area so reeeesonably close.... ish..

I think he was offering to help the op here, did he respond?

[blazer2007]

thanks, now I know what to look for.Looks like 2 screws at the top hold the funnel part of the filler neck on the outside when you open the door

[eighteenninetytwo]

Following up to this thread and thank you to Krazy Ray who sold me the above filler neck cover etc. See picture for current state. As its a square body I'm glad it was a square cap cover. My bodywork chap has done a splendid job thus far.

[gclark1]

Just saw this after I responded to another thread. That's the way to modernize! Looks very nice. Now the hard work starts - bondo and shaping. I'm no expert so it took me a very long time to make it look like it came that way.