1974 Blazer doors? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RetroSBK · 01-13-2007, 01:21 AM

FNG here, did a seach, but nothing came up indoer replacement door, etc etc...

Does anyone know of a company that is making a door that will fit the demolished one on my 74 Blazer?

Everywhere I look Im told to buy the Truck door and cut the frame off...

Is that it? Seems like SOMEONE woudl make a door for this thing!!!

gmcman7202 · 01-13-2007, 01:41 AM

i take it you got the full removeable top ? caus otherwise the regular door would work. just cut off the truck door, but then add a plate inside for the support.

ItsNotABlazer · 01-13-2007, 01:42 AM

If you look at the factory door they basically did the same thing.....cut off the top of it. I was planning on doing that on my 74 when it comes time to replace the doors. I do not believe I have ever seen any aftermarket companies advertising these doors so your best bet would be to cut some yourself.

ItsNotABlazer · 01-13-2007, 01:43 AM

Oh and btw....welcome to the board from TX!!

**Zoomad75** · 01-13-2007, 01:49 AM

I hate to say it, but even LMC doesn't have doors for 73-75 K5's. If LMC don't have it, it's probably not being repoped... So unless you happen to come across an actual NOS door, your stuck getting one from a later Blazer or truck (they are the same) and cutting the frame.

If the door isn't smashed to bad, you might be able to get away with just putting a skin on.

Still Cutting full doors down isn't that difficult. Salvage the rubber cap off of the top of the a-pillar, the fiberglass cap for the rear and the tin support under it off of your old doors. You'll need them to put back on the cut doors. Follow the write up on CK5.com for the details of how to cut the doors.

My doors aren't caved in, but the bottoms are rusty. I'll probably have to fix the lower sections before long..

bagged74 · 01-14-2007, 12:11 PM

Even if you order a door from GM it is a truck door with a template to use for the cutting. The doors are the same. just put the little support bracket back inside the door at the rear when you cut the top off of it.

**Captkaos** · 01-16-2007, 07:01 PM

Ditto on what everyone else has said. There isn't a door availible that is already cut. You will have to cut it to make it work.

Jonboy · 01-17-2007, 01:10 PM

When GM offered a replacement door for the 73-75 Blazer, it was a truck door, a template, a filler, and instructions. BTW, if you were going to add power windows, this would be the time to upgrade to the 77-up doors.

AKNeal · 07-11-2012, 02:19 PM

I don't mean to bring up such an old post but I have a 1973 K5 that I need to get new doors for. I'll probably grab some 80's model doors with electric windows and what not. I am just curious where I can get the template to cut them. I also want to know where to place that bace on the back of the door. I did a google search and this forum was pretty much the only thing that came up. Is there a how-to somewhere out there that can assist me further. I think the current doors are replaements and they weren't done right. The windows do not roll up if they are left down too long. They come off the track. So I want to make sure I do it right this time. Also, does anyone know a good place to get fiberglass replacement doors? (off topic, I know) Thanks!!

Ford Assassin · 07-16-2012, 09:16 PM

http://coloradok5.com/full-convertible-conversion.shtml

closer9 · 07-21-2012, 01:18 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

AKNeal · 07-22-2012, 06:51 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

windwalker · 03-03-2015, 08:33 AM

looking for templates to cut doors for 1975K5 full convertible don't want to make any
mistakes on this can any of you folks help out.

Eyegore · 03-03-2015, 09:25 AM

Windwalker see the post above from FordAssain with the link to Colorado K5

01-13-2007, 01:21 AM	#1
RetroSBK Registered User Join Date: Jan 2007 Location: Camarillo, CA Posts: 64	1974 Blazer doors? FNG here, did a seach, but nothing came up indoer replacement door, etc etc... Does anyone know of a company that is making a door that will fit the demolished one on my 74 Blazer? Everywhere I look Im told to buy the Truck door and cut the frame off... Is that it? Seems like SOMEONE woudl make a door for this thing!!!

01-13-2007, 01:41 AM	#2
gmcman7202 Active Member Join Date: Oct 2006 Location: wi Posts: 190	Re: 1974 Blazer doors? i take it you got the full removeable top ? caus otherwise the regular door would work. just cut off the truck door, but then add a plate inside for the support.

01-13-2007, 01:42 AM	#3
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	Re: 1974 Blazer doors? If you look at the factory door they basically did the same thing.....cut off the top of it. I was planning on doing that on my 74 when it comes time to replace the doors. I do not believe I have ever seen any aftermarket companies advertising these doors so your best bet would be to cut some yourself. __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

01-13-2007, 01:43 AM	#4
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	Re: 1974 Blazer doors? Oh and btw....welcome to the board from TX!! __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

01-13-2007, 01:49 AM	#5
Zoomad75 K5Camper Join Date: Mar 2004 Location: Pueblo, CO Posts: 1,513	Re: 1974 Blazer doors? I hate to say it, but even LMC doesn't have doors for 73-75 K5's. If LMC don't have it, it's probably not being repoped... So unless you happen to come across an actual NOS door, your stuck getting one from a later Blazer or truck (they are the same) and cutting the frame. If the door isn't smashed to bad, you might be able to get away with just putting a skin on. Still Cutting full doors down isn't that difficult. Salvage the rubber cap off of the top of the a-pillar, the fiberglass cap for the rear and the tin support under it off of your old doors. You'll need them to put back on the cut doors. Follow the write up on CK5.com for the details of how to cut the doors. My doors aren't caved in, but the bottoms are rusty. I'll probably have to fix the lower sections before long.. __________________ Rob Z. 1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP 1991 K5 8.1L/NV4500/241/D44/14b FWC Camper

01-14-2007, 12:11 PM	#6
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	Re: 1974 Blazer doors? Even if you order a door from GM it is a truck door with a template to use for the cutting. The doors are the same. just put the little support bracket back inside the door at the rear when you cut the top off of it.

01-16-2007, 07:01 PM	#7
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: 1974 Blazer doors? Ditto on what everyone else has said. There isn't a door availible that is already cut. You will have to cut it to make it work. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

01-17-2007, 01:10 PM	#8
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: 1974 Blazer doors? When GM offered a replacement door for the 73-75 Blazer, it was a truck door, a template, a filler, and instructions. BTW, if you were going to add power windows, this would be the time to upgrade to the 77-up doors.

07-11-2012, 02:19 PM	#9
AKNeal Registered User Join Date: Jul 2012 Location: Wichita Falls, TX Posts: 4	Re: 1974 Blazer doors? I don't mean to bring up such an old post but I have a 1973 K5 that I need to get new doors for. I'll probably grab some 80's model doors with electric windows and what not. I am just curious where I can get the template to cut them. I also want to know where to place that bace on the back of the door. I did a google search and this forum was pretty much the only thing that came up. Is there a how-to somewhere out there that can assist me further. I think the current doors are replaements and they weren't done right. The windows do not roll up if they are left down too long. They come off the track. So I want to make sure I do it right this time. Also, does anyone know a good place to get fiberglass replacement doors? (off topic, I know) Thanks!!

07-16-2012, 09:16 PM	#10
Ford Assassin Registered User Join Date: Jun 2008 Location: Jackson, Ca. Posts: 674	Re: 1974 Blazer doors? http://coloradok5.com/full-convertible-conversion.shtml __________________ Cable -K5 Blazer 2wd: 6.0 LQ4, 7875 Turbo, Tick Stage II Turbo Cam, Built 4L80e, RevMax Billet 3600, 9.5" 14 Bolt -Chevy 3+3 Crew Cab Dually: Cummins 12v P-Pump Swap, Compound Turbos, A2W Intercooler, NV4500HD, 4wd conversion, Radius Arms, Coilovers, Crossover Steering, etc Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=803608

07-21-2012, 01:18 PM	#11
closer9 Registered User Join Date: Mar 2008 Location: Pineveille, MO Posts: 92	Re: 1974 Blazer doors? Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by Sillyoldman; 07-22-2012 at 08:46 PM.

07-22-2012, 06:51 PM	#12
AKNeal Registered User Join Date: Jul 2012 Location: Wichita Falls, TX Posts: 4	Re: 1974 Blazer doors? Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by Sillyoldman; 07-22-2012 at 08:45 PM.

03-03-2015, 08:33 AM	#13
windwalker Registered User Join Date: Oct 2014 Location: crooksville ohio Posts: 1	Re: 1974 Blazer doors? looking for templates to cut doors for 1975K5 full convertible don't want to make any mistakes on this can any of you folks help out.

03-03-2015, 09:25 AM	#14
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	Re: 1974 Blazer doors? Windwalker see the post above from FordAssain with the link to Colorado K5 __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.