|
06-29-2017, 10:05 AM
|
#1 |
|
Registered User
Join Date: Jun 2017
Location: Powder Springs, Ga
Posts: 50
|
Diamond plate
Thinking about Diamond plate in the bed of my 63 step-side. Any help with the install would be appreciated. Working on the cab now before pulling it off the frame. Bed is apart and ready to clean and paint. Thanks in advance. This is my first attempt at a frame up restoration.
|
|
|
|
06-29-2017, 04:20 PM
|
#2 |
|
Registered User
Join Date: Jan 2009
Location: Burbank, CA
Posts: 3,584
|
Re: Diamond plate
I don't think they sell sheets big enough so you will have a seam. Unless your truck is a step side, but even then it will only reach to the edge of the rails that are welded to the bed sides.
|
|
|
|
|
06-29-2017, 06:08 PM
|
#3 |
|
But Found Her 25yrs Later!
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,497
|
Re: Diamond plate
Somebody put a full sheet of diamond plate in mine. There are no seams.
__________________
I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035 |
|
|
|
|
06-29-2017, 06:15 PM
|
#4 |
|
Registered User
Join Date: Jan 2009
Location: Burbank, CA
Posts: 3,584
|
Re: Diamond plate
wow does it go under the rails?
|
|
|
|
|
06-29-2017, 08:32 PM
|
#5 |
|
Registered User
Join Date: Jun 2017
Location: Powder Springs, Ga
Posts: 50
|
Re: Diamond plate
My biggest question is how to take up the void left when the wood is removed. I am using .250 plate and there will be a gap on each end and over the cross members. I think it will be wavy if its not supported.
|
|
|
|
|
06-29-2017, 08:39 PM
|
#6 | ||
|
But Found Her 25yrs Later!
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,497
|
Re: Diamond plate
Quote:
Quote:
__________________
I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035 |
||
|
|
|
|
06-29-2017, 11:54 PM
|
#7 |
|
60-66 Nut
 Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
|
Re: Diamond plate
That .250" diamond plate is way overkill and way more weight and money than you need to spend. I would go with 14ga or no more than 1/8". Then make up the thickness different by building a framework from some 5/8" square tubing.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
06-30-2017, 08:57 PM
|
#8 |
|
Registered User
Join Date: Jun 2017
Location: Powder Springs, Ga
Posts: 50
|
Re: Diamond plate
Thanks for the info. Will work on that and post pics of my progress.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
