Can someone run Desktop dyno numbers for me? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lux hauler · 04-05-2002, 02:49 AM

I don't know what kind of info you need but, here is what I'm thinking about:
350 bored .030 over, flat top pistons, Vortec heads, Edelbrock 600cfm carb (750 if I need to), Edelbrock Performer intake and Crane 266 cam.

------------------

72 LWB; 350/350,PS,PB,Posi,all original........for now.
99 Ranger

GOD BLESS THE U.S.A.!!!
http://communities.msn.com/196772ChevyTrucks
Vermilion, Ohio

lux hauler · 04-05-2002, 10:02 AM

ttt

69 longhorn · 04-05-2002, 10:15 AM

I have seen dyno sheets on that combo,with a comp cams XE 268,& with no bowl work on the heads 380 hp. To go with that much lift, you will need to cut guides,& change springs. You might also think about a slight dish on the piston, to keep compression in line for pump fuel. Good luck.....69 longhorn.

lux hauler · 04-05-2002, 01:45 PM

Thanks for the info hotrod horn.
This may all take place a little sooner than I expected. I have been waiting to do any of this stuff to my truck because I need to get electric run to my garage. The first estimate that I got was $3200....that was upgrading the service to the house to 200A, running to power to the garage and wiring the garage (plus a few other small things). I just got another estimate....to upgrade the service and run the power to the garage....$980. They will also wire the garage for $735 but I'm gunna do that myself.
So, hopefully my motor will be coming out and going to the machine shop in the next month or so.......wooohooo!!!

704x4 · 04-05-2002, 06:13 PM

WHEN I RAN MY DESKTOP I CAME UP WITH

342 HP @5500
362 TQ @4000

THATS WITH 600 CFM CARB
HEADERS WITH MUFFLERS
AND GIVING THE VORTECS THE BENNIFIT OF THE DOUBT BECAUSE I HEARD THAT THEY HAVE GREAT FLOW

lux hauler · 04-05-2002, 06:33 PM

Thanks 704X4......I talked to the machine shop today. They said that I'd have to go with more dish than what I have now to keep the compression where I want it.
Hopefully I can get this started in the next month or so.

Thanks again

bigjimzlll · 04-05-2002, 08:27 PM

980.00 is a great price for a 200 amp service change, im an electrician, id do it for you, but..........

------------------
67 lwb fleetside...first hotrod in 25 years...283..186 bowl ported heads..270h comp cam 600 1405...stealth intake..HEI..th350 with 2500 rpm stall..4:10 POSI
god I love to go fast

lux hauler · 04-05-2002, 09:59 PM

Thanks for the offer bigjimzlll... when do ya want to start....lol.
yeah.....that is a really good price. I had to call the company back to make sure that it was everything I wanted. Everything from the box out to the meter is already set up for the 200 so that saved me a few bucks.

04-05-2002, 02:49 AM	#1
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	Can someone run Desktop dyno numbers for me? I don't know what kind of info you need but, here is what I'm thinking about: 350 bored .030 over, flat top pistons, Vortec heads, Edelbrock 600cfm carb (750 if I need to), Edelbrock Performer intake and Crane 266 cam. ------------------ 72 LWB; 350/350,PS,PB,Posi,all original........for now. 99 Ranger GOD BLESS THE U.S.A.!!! http://communities.msn.com/196772ChevyTrucks Vermilion, Ohio __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian).

04-05-2002, 10:02 AM	#2
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	ttt __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian).

04-05-2002, 10:15 AM	#3
69 longhorn Registered User Join Date: Aug 2001 Location: rock island,il,usa Posts: 5,382	I have seen dyno sheets on that combo,with a comp cams XE 268,& with no bowl work on the heads 380 hp. To go with that much lift, you will need to cut guides,& change springs. You might also think about a slight dish on the piston, to keep compression in line for pump fuel. Good luck.....69 longhorn. __________________ http://community.webshots.com/user/hotrodhorn

04-05-2002, 01:45 PM	#4
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	Thanks for the info hotrod horn. This may all take place a little sooner than I expected. I have been waiting to do any of this stuff to my truck because I need to get electric run to my garage. The first estimate that I got was $3200....that was upgrading the service to the house to 200A, running to power to the garage and wiring the garage (plus a few other small things). I just got another estimate....to upgrade the service and run the power to the garage....$980. They will also wire the garage for $735 but I'm gunna do that myself. So, hopefully my motor will be coming out and going to the machine shop in the next month or so.......wooohooo!!! __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian).

04-05-2002, 06:13 PM	#5
704x4 Registered User Join Date: Feb 2002 Location: Greene, Iowa Posts: 150	WHEN I RAN MY DESKTOP I CAME UP WITH 342 HP @5500 362 TQ @4000 THATS WITH 600 CFM CARB HEADERS WITH MUFFLERS AND GIVING THE VORTECS THE BENNIFIT OF THE DOUBT BECAUSE I HEARD THAT THEY HAVE GREAT FLOW __________________ 70 3/4 ton 4x4 FOR SALE Greene, IA

04-05-2002, 06:33 PM	#6
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	Thanks 704X4......I talked to the machine shop today. They said that I'd have to go with more dish than what I have now to keep the compression where I want it. Hopefully I can get this started in the next month or so. Thanks again __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian).

04-05-2002, 08:27 PM	#7
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	980.00 is a great price for a 200 amp service change, im an electrician, id do it for you, but.......... ------------------ 67 lwb fleetside...first hotrod in 25 years...283..186 bowl ported heads..270h comp cam 600 1405...stealth intake..HEI..th350 with 2500 rpm stall..4:10 POSI god I love to go fast __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

04-05-2002, 09:59 PM	#8
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	Thanks for the offer bigjimzlll... when do ya want to start....lol. yeah.....that is a really good price. I had to call the company back to make sure that it was everything I wanted. Everything from the box out to the meter is already set up for the 200 so that saved me a few bucks. __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian).



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.