question about rear end on a 65 c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

corvettejim1968 · 12-19-2014, 08:33 PM

so a couple days ago i blew up my rear end on my 1965 c10 it has 3:73 gears. and the same day my hot water heater started leaking. bad day to say the least. does anybody here know from what year to year rear end will fit my truck. i have coil over springs.

**LostMy65** · 12-19-2014, 08:37 PM

edit....

I misspoke

66Submarine · 12-19-2014, 08:38 PM

I think '65 to early '70 is what you're after. '63-'64 used a different panhard bar mount, later '70 was slightly wider, and '71-'72 are 5 lug (and the slightly wider width that they went to in late '70).

All IIRC/AFAIK, of course.

**Captainfab** · 12-20-2014, 12:50 AM

This is correct.......

Quote:

Originally Posted by 66Submarine

I think '65 to early '70 is what you're after. '63-'64 used a different panhard bar mount, later '70 was slightly wider, and '71-'72 are 5 lug (and the slightly wider width that they went to in late '70).

All IIRC/AFAIK, of course.

Grandpa54 · 12-21-2014, 12:10 AM

Quote:

Originally Posted by corvettejim1968

so a couple days ago i blew up my rear end on my 1965 c10 it has 3:73 gears. And the same day my hot water heater started leaking. Bad day to say the least. Does anybody here know from what year to year rear end will fit my truck. I have coil over springs.

i have a 65 3.73 rear end out oh a panel if you are interested

corvettejim1968 · 01-02-2015, 08:16 AM

does anybody have a 65-69 or early 70 c10 rear end in the greater Phoenix area?

azjim1 · 01-03-2015, 01:17 PM

If you can't easily find one you might want to talk to AZ differential specialists, on Grand ave between McDowell and Thomas. I haven't personally used them but a guy I know did and was happy with them. They are almost across the road from where I work and they do lots of nice hot rods, etc.

corvettejim1968 · 01-04-2015, 11:50 AM

thanks i did give them a call. they dont have anything that old. but Dino63 hooked me up with a guy so i got one for $175

thank you

12-19-2014, 08:33 PM	#1
corvettejim1968 Registered User Join Date: Jun 2011 Location: Phoenix,AZ Posts: 946	question about rear end on a 65 c10 so a couple days ago i blew up my rear end on my 1965 c10 it has 3:73 gears. and the same day my hot water heater started leaking. bad day to say the least. does anybody here know from what year to year rear end will fit my truck. i have coil over springs. __________________ Hand Made Factory reproduction A/C vents text or call 602-361-6421 Website for A/C vents https://coolc10.com/ Last edited by corvettejim1968; 12-19-2014 at 08:34 PM. Reason: add

12-19-2014, 08:37 PM	#2
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,468	Re: question about rear end on a 65 c10 edit.... I misspoke __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

12-19-2014, 08:38 PM	#3
66Submarine Registered User Join Date: Sep 2012 Location: Dallas, GA Posts: 1,497	Re: question about rear end on a 65 c10 I think '65 to early '70 is what you're after. '63-'64 used a different panhard bar mount, later '70 was slightly wider, and '71-'72 are 5 lug (and the slightly wider width that they went to in late '70). All IIRC/AFAIK, of course. __________________ 1965 C30 pickup 350/SM420/4.10's (daily driver) thread 1968 Impala 4 door sedan (future driver project) thread

01-02-2015, 08:16 AM	#6
corvettejim1968 Registered User Join Date: Jun 2011 Location: Phoenix,AZ Posts: 946	Re: question about rear end on a 65 c10 does anybody have a 65-69 or early 70 c10 rear end in the greater Phoenix area? __________________ Hand Made Factory reproduction A/C vents text or call 602-361-6421 Website for A/C vents https://coolc10.com/ Last edited by corvettejim1968; 01-02-2015 at 08:26 AM. Reason: add

01-03-2015, 01:17 PM	#7
azjim1 Registered User Join Date: Nov 2012 Location: Phoenix, AZ Posts: 9	Re: question about rear end on a 65 c10 If you can't easily find one you might want to talk to AZ differential specialists, on Grand ave between McDowell and Thomas. I haven't personally used them but a guy I know did and was happy with them. They are almost across the road from where I work and they do lots of nice hot rods, etc.

01-04-2015, 11:50 AM	#8
corvettejim1968 Registered User Join Date: Jun 2011 Location: Phoenix,AZ Posts: 946	Re: question about rear end on a 65 c10 thanks i did give them a call. they dont have anything that old. but Dino63 hooked me up with a guy so i got one for $175 thank you __________________ Hand Made Factory reproduction A/C vents text or call 602-361-6421 Website for A/C vents https://coolc10.com/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.