Bucket seat cab brace? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CG · 03-09-2019, 11:25 AM

I have a cab that's still on the chassis (stored at a friends house), it had buckets originally, but will end up with a bench. Does the seat brace under the cab unbolt, or is it welded in?

chewychevy67 · 03-09-2019, 11:55 AM

It has 3 Phillips screws that hold it in place

CG · 03-09-2019, 12:12 PM

Quote:

Originally Posted by chewychevy67

It has 3 Phillips screws that hold it in place

Thanks!

**derotoreut** · 03-09-2019, 09:57 PM

The bucket seat brace is welded to the floor. I'm in the process of putting one into a truck that did not have buckets originally.

CG · 03-10-2019, 08:20 AM

Ok, thanks ... Now Im wondering what Chewy67 is thinking of. Something Im missing?

**leddzepp** · 03-10-2019, 10:13 AM

Quote:

Originally Posted by CG

Ok, thanks ... Now Im wondering what Chewy67 is thinking of. Something Im missing?

He’s thinking of the cab brace for the back of the middle seat on buddy buckets in 67/68 trucks.

**LockDoc** · 03-10-2019, 10:21 AM

-
Here is what Harold (71 super) said in this Thread:

http://67-72chevytrucks.com/vboard/s...d.php?t=615943

Quote:

Steve, if you look at pics dan posted the long bracket is spot welded in a couple of spots just to the rear of the trans tunnel and between the cab structure supports in the middle of the cab. They will be in line with the standard seat mounting plates that are just outside the center supports. Mine looks rough I. Photo, but it is all undercoating, I did not scrape it off, but it did cut/ trim the support away from the old floor section. You will have a little clean up but nothing like it was.

Here is another thread with some info:

http://67-72chevytrucks.com/vboard/s...d.php?t=770889

LockDoc

CG · 03-10-2019, 12:47 PM

Lots more good info, thanks!

chewychevy67 · 03-10-2019, 11:31 PM

Sorry I must have read it fast. The mounts on the floor are welded but are in the same location as a bench seat for buddy buckets which is what I thought I read. My mistake

CG · 03-11-2019, 09:14 AM

Quote:

Originally Posted by chewychevy67

Sorry I must have read it fast. The mounts on the floor are welded but are in the same location as a bench seat for buddy buckets which is what I thought I read. My mistake

No probs, I learned something from your posts too. After all my years on this board I still manage to learn stuff nearly every day. Now if I could only retain it haha!!!

03-09-2019, 11:25 AM	#1
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,769	Bucket seat cab brace? I have a cab that's still on the chassis (stored at a friends house), it had buckets originally, but will end up with a bench. Does the seat brace under the cab unbolt, or is it welded in?

03-09-2019, 11:55 AM	#2
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,408	Re: Bucket seat cab brace? It has 3 Phillips screws that hold it in place

03-09-2019, 09:57 PM	#4
derotoreut Roto Reuter thats the name... Join Date: Feb 2010 Location: Darien, NY Posts: 1,848	Re: Bucket seat cab brace? The bucket seat brace is welded to the floor. I'm in the process of putting one into a truck that did not have buckets originally. __________________ ~ Dan My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977

03-10-2019, 08:20 AM	#5
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,769	Re: Bucket seat cab brace? Ok, thanks ... Now Im wondering what Chewy67 is thinking of. Something Im missing?

03-10-2019, 12:47 PM	#8
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,769	Re: Bucket seat cab brace? Lots more good info, thanks!

03-10-2019, 11:31 PM	#9
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,408	Re: Bucket seat cab brace? Sorry I must have read it fast. The mounts on the floor are welded but are in the same location as a bench seat for buddy buckets which is what I thought I read. My mistake



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.