64 c10 build - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mjminino · 02-17-2015, 07:40 PM

Yeah I still need to dick around with my rockers. dreading it, would rather pay someone who knows what they are doing. it is literally the only thing stopping my build from moving on.

NevEno · 02-20-2015, 05:59 PM

Undercoating done!

ol_skool_chevy · 02-20-2015, 06:03 PM

Very nice...

Mjminino · 02-20-2015, 06:36 PM

Sexy

NevEno · 02-20-2015, 06:39 PM

Thanks guys!

NevEno · 02-22-2015, 11:20 PM

I cut my dash.. Well I'm fixing the PO radio cut out.

Before

NevEno · 02-22-2015, 11:23 PM

I still have a few spots to touch up.

After

Mjminino · 02-22-2015, 11:34 PM

Nice welding. What technique are you using?

NevEno · 02-23-2015, 12:52 AM

Thanks Mjminino! I kept my spot welds spaced out and cooled each weld with water, sanded the welds with a angle die grinder with 2" 36 grit pads.

rickoner · 02-23-2015, 08:55 AM

You're moving right along and doing great work to boot!

Don't know if I missed it, but what product did you use as undercoating?

msg · 02-23-2015, 10:02 AM

Killer progress on your truck! Love the color too and that it has a family connection for you. I've got a lot of the same body work to do soon. Subscribed.

62 Barnfind · 02-24-2015, 11:54 AM

Nice job on the radio repair!

NevEno · 02-24-2015, 02:12 PM

Quote:

Originally Posted by rickoner

You're moving right along and doing great work to boot!

Don't know if I missed it, but what product did you use as undercoating?

Thanks! I used linex. They did the bed on my 09 silverado in color match and my rancher racks an I've been really happy with'em. They cut me a deal..

Quote:

Originally Posted by msg

Killer progress on your truck! Love the color too and that it has a family connection for you. I've got a lot of the same body work to do soon. Subscribed.

Thank you. The build has been fun but fixing somebody else's cover up's suk. I wouldn't be surprised if my grandpa's truck is on here. The last place I seen it was in Perris, Ca.

Quote:

Originally Posted by 62 Barnfind

Nice job on the radio repair!

Thank you. I'm real happy with the outcome.

ol_skool_chevy · 02-24-2015, 05:13 PM

What undercoating did you use?

NevEno · 02-24-2015, 05:35 PM

Line-X

NevEno · 03-01-2015, 08:38 PM

I bought these on eBay Friday!! I haven't got'em yet, but they seem to be in really good shape.. I know I'll have to repaint them witch is cool cause
I have to paint my bumpers and grille!!

Mjminino · 03-01-2015, 08:45 PM

What did those run you? They look brand new

Evoracer · 03-02-2015, 12:17 AM

Quote:

Originally Posted by NevEno

My new primed bumper came in yesterday from TB. It took less than a week. The chrome bumper was ok but I think it will look a lot better with a painted one.

TB?

I've looking for some non-chrome bumpers for my '63.

Evoracer · 03-02-2015, 12:27 AM

Top Banana... got it!

Mjminino · 03-02-2015, 06:32 AM

NevEno · 03-09-2015, 05:49 PM

Small update!! Little more rust repair.. I got the hubcaps, 3 of the 4 look good!

rwade · 03-09-2015, 06:11 PM

Who made the lisence plate sitting on your cowl? Looks like it was cut with a water jet.

Wade

NevEno · 03-09-2015, 07:02 PM

I had a local company make it on their CNC plasma cutter.

Modges'66 · 03-09-2015, 07:52 PM

The plate looks laser-cut to me...
I like te chrome caps better. Ya gotta have something chrome on this thing! Or do you want it to look like a dirt-cheap base model?
All kidding aside, I don't know what styling cues that you are looking for...

NevEno · 04-13-2015, 04:27 PM

I’ve decided to paint the truck. I figure I’ve went this far I might as well finish it, I can’t leave well enough alone. Here is some pics of the rust repair.

02-17-2015, 07:40 PM	#76
Mjminino Registered User Join Date: Nov 2014 Location: Omaha Posts: 558	Re: 64 c10 build Yeah I still need to dick around with my rockers. dreading it, would rather pay someone who knows what they are doing. it is literally the only thing stopping my build from moving on.

02-20-2015, 05:59 PM	#77
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: 64 c10 build Undercoating done! Attached Images __________________ You can find me on Instagram @neveno_cten

02-20-2015, 06:03 PM	#78
ol_skool_chevy Registered User Join Date: May 2010 Location: Hillsboro, Oregon 97123 Posts: 1,300	Re: 64 c10 build Very nice... __________________ Measure with a yard stick Mark with Chalk Cut with a torch Built it yourself, don't count on others to to do it for you or with you. It will never get done

02-20-2015, 06:36 PM	#79
Mjminino Registered User Join Date: Nov 2014 Location: Omaha Posts: 558	Re: 64 c10 build Sexy

02-20-2015, 06:39 PM	#80
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: 64 c10 build Thanks guys! __________________ You can find me on Instagram @neveno_cten

02-22-2015, 11:20 PM	#81
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: 64 c10 build I cut my dash.. Well I'm fixing the PO radio cut out. Before Attached Images __________________ You can find me on Instagram @neveno_cten

02-22-2015, 11:23 PM	#82
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: 64 c10 build I still have a few spots to touch up. After Attached Images __________________ You can find me on Instagram @neveno_cten

02-22-2015, 11:34 PM	#83
Mjminino Registered User Join Date: Nov 2014 Location: Omaha Posts: 558	Re: 64 c10 build Nice welding. What technique are you using?

02-23-2015, 12:52 AM	#84
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: 64 c10 build Thanks Mjminino! I kept my spot welds spaced out and cooled each weld with water, sanded the welds with a angle die grinder with 2" 36 grit pads. __________________ You can find me on Instagram @neveno_cten

02-23-2015, 08:55 AM	#85
rickoner Registered User Join Date: Apr 2014 Location: pittsburgh, pa Posts: 258	Re: 64 c10 build You're moving right along and doing great work to boot! Don't know if I missed it, but what product did you use as undercoating?

02-23-2015, 10:02 AM	#86
msg Registered User Join Date: Feb 2013 Location: GA Posts: 1,313	Re: 64 c10 build Killer progress on your truck! Love the color too and that it has a family connection for you. I've got a lot of the same body work to do soon. Subscribed.

02-24-2015, 11:54 AM	#87
62 Barnfind Registered User Join Date: Jan 2012 Location: Killeen, Tx Posts: 1,348	Re: 64 c10 build Nice job on the radio repair! __________________ John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513

02-24-2015, 05:13 PM	#89
ol_skool_chevy Registered User Join Date: May 2010 Location: Hillsboro, Oregon 97123 Posts: 1,300	Re: 64 c10 build What undercoating did you use? __________________ Measure with a yard stick Mark with Chalk Cut with a torch Built it yourself, don't count on others to to do it for you or with you. It will never get done

02-24-2015, 05:35 PM	#90
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: 64 c10 build Line-X __________________ You can find me on Instagram @neveno_cten

03-01-2015, 08:38 PM	#91
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: 64 c10 build I bought these on eBay Friday!! I haven't got'em yet, but they seem to be in really good shape.. I know I'll have to repaint them witch is cool cause I have to paint my bumpers and grille!! Attached Images __________________ You can find me on Instagram @neveno_cten



Register or Log In To remove these advertisements.

03-01-2015, 08:45 PM	#92
Mjminino Registered User Join Date: Nov 2014 Location: Omaha Posts: 558	Re: 64 c10 build What did those run you? They look brand new

03-02-2015, 12:27 AM	#94
Evoracer Registered User Join Date: Jan 2015 Location: Anaheim, ca Posts: 120	Re: 64 c10 build Top Banana... got it!

03-02-2015, 06:32 AM	#95
Mjminino Registered User Join Date: Nov 2014 Location: Omaha Posts: 558	Re: 64 c10 build

03-09-2015, 05:49 PM	#96
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: 64 c10 build Small update!! Little more rust repair.. I got the hubcaps, 3 of the 4 look good! Attached Images __________________ You can find me on Instagram @neveno_cten

03-09-2015, 06:11 PM	#97
rwade Registered User Join Date: Apr 2010 Location: Louisiana Posts: 970	Re: 64 c10 build Who made the lisence plate sitting on your cowl? Looks like it was cut with a water jet. Wade

03-09-2015, 07:02 PM	#98
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: 64 c10 build I had a local company make it on their CNC plasma cutter. __________________ You can find me on Instagram @neveno_cten

03-09-2015, 07:52 PM	#99
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: 64 c10 build The plate looks laser-cut to me... I like te chrome caps better. Ya gotta have something chrome on this thing! Or do you want it to look like a dirt-cheap base model? All kidding aside, I don't know what styling cues that you are looking for... __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

04-13-2015, 04:27 PM	#100
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: 64 c10 build I’ve decided to paint the truck. I figure I’ve went this far I might as well finish it, I can’t leave well enough alone. Here is some pics of the rust repair. Attached Images __________________ You can find me on Instagram @neveno_cten

Register or Log In To remove these advertisements.