58-59 fleetside shortbox - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fine 67 · 01-21-2018, 04:05 PM

is there someone who wouldn't mind getting one measurement off their box all i need is from the front edge to the seam in the back down the middle of the box thanks mark

66 Burban · 01-22-2018, 08:23 PM

Here ya go:

fine 67 · 01-22-2018, 09:26 PM

thank you so much mark

66 Burban · 01-22-2018, 09:27 PM

Quote:

Originally Posted by fine 67

thank you so much mark

I prob —- glad to help..

fine 67 · 02-19-2018, 11:57 AM

Thank you for the measurements, I have my lines ready to cut. I just want to make sure I'm double positive just to make sure. Could you please send me the same measurements so I know mine are the same before I start hacking away. Thank you, Mark

66 Burban · 02-19-2018, 11:25 PM

Quote:

Originally Posted by fine 67

Thank you for the measurements, I have my lines ready to cut. I just want to make sure I'm double positive just to make sure. Could you please send me the same measurements so I know mine are the same before I start hacking away. Thank you, Mark

Can't get measurements until weekend. Exactly what measurements are you looking for?

fine 67 · 02-24-2018, 01:30 PM

if you could measure the box in the same spot as i did so. i can make sure i have it right the bottom of the front and back of the box thanks mark

01-21-2018, 04:05 PM	#1
fine 67 Junior Member Join Date: Jun 2001 Location: webster,n.y.,usa Posts: 127	58-59 fleetside shortbox is there someone who wouldn't mind getting one measurement off their box all i need is from the front edge to the seam in the back down the middle of the box thanks mark

01-22-2018, 08:23 PM	#2
66 Burban Registered User Join Date: Aug 2011 Location: Green Valley,AZ Posts: 527	Re: 58-59 fleetside shortbox Here ya go: Attached Images __________________ Remember: "When seconds count, the Police are only minutes away". Thx, Billy B.

01-22-2018, 09:26 PM	#3
fine 67 Junior Member Join Date: Jun 2001 Location: webster,n.y.,usa Posts: 127	Re: 58-59 fleetside shortbox thank you so much mark

02-19-2018, 11:57 AM	#5
fine 67 Junior Member Join Date: Jun 2001 Location: webster,n.y.,usa Posts: 127	Re: 58-59 fleetside shortbox Thank you for the measurements, I have my lines ready to cut. I just want to make sure I'm double positive just to make sure. Could you please send me the same measurements so I know mine are the same before I start hacking away. Thank you, Mark Attached Images

02-24-2018, 01:30 PM	#7
fine 67 Junior Member Join Date: Jun 2001 Location: webster,n.y.,usa Posts: 127	Re: 58-59 fleetside shortbox if you could measure the box in the same spot as i did so. i can make sure i have it right the bottom of the front and back of the box thanks mark



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.