Questions about tailgate trim pieces - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**KyleSeal** · 03-18-2018, 12:13 AM

So I've got my hands on some original tailgate trim, very good condition as well. But the piece that goes just above the tailgate handle/latch is missing the clip that slips over the stud.
Does anywhere have this clip for me to purchase? I don't want to buy a new piece, this old piece is very nice.

Also. My tailgate has the holes for the upper trim, does that meant it should have the holes for the lower trim as well? I'm looking for them but they maybe covered with bondo, but before I start searching I am curious if having upper trim always means that the lower trim is a given.
Posted via Mobile Device

67_C-30 · 03-18-2018, 12:34 AM

No, a lot of trucks just have upper trim. There was no lower trim in 67-68, and lots of 69-72's have upper trim, but no lower trim on the gate.

As far as those clips, I'd think they were available, but if not, I'm sure someone here on the parts would have them used.

custom10nut · 03-18-2018, 01:28 AM

You can get them at NAPA, they're called Barrel Clips. Just take your trim piece in to make sure you get the right size

03-18-2018, 12:13 AM	#1
KyleSeal Senior Member Join Date: Mar 2014 Location: Toano, VA Posts: 836	Questions about tailgate trim pieces So I've got my hands on some original tailgate trim, very good condition as well. But the piece that goes just above the tailgate handle/latch is missing the clip that slips over the stud. Does anywhere have this clip for me to purchase? I don't want to buy a new piece, this old piece is very nice. Also. My tailgate has the holes for the upper trim, does that meant it should have the holes for the lower trim as well? I'm looking for them but they maybe covered with bondo, but before I start searching I am curious if having upper trim always means that the lower trim is a given. Posted via Mobile Device

03-18-2018, 12:34 AM	#2
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Questions about tailgate trim pieces No, a lot of trucks just have upper trim. There was no lower trim in 67-68, and lots of 69-72's have upper trim, but no lower trim on the gate. As far as those clips, I'd think they were available, but if not, I'm sure someone here on the parts would have them used. __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

03-18-2018, 01:28 AM	#3
custom10nut Registered User Join Date: Apr 2015 Location: East Tn (In the heart of the Smoky Mtns) Posts: 1,846	Re: Questions about tailgate trim pieces You can get them at NAPA, they're called Barrel Clips. Just take your trim piece in to make sure you get the right size



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.