CA 1967 Suburban take offs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gearboxx70 · 02-10-2019, 04:10 PM

Trying to get rid of some stuff I hate to throw away if someone can use it for a restoration...

I have a complete heater box (inner and outer, with fan and new gasket kit that may or may not be complete). The inner box has one rusted corner that looks to be an easy repair. No control panel, but it comes with control cables. $20 plus shipping?

Mostly complete wire harness. I know there's some guys that want these to restore the fuse block, or grab the factory connectors from. Includes the fuse block and factory bulhead connector. $10 bucks plus shipping? SOLD!

Factory drum/drum booster/master cyl. Comes with mounting bracket, push rod, proportion block. $30 plus shipping?

Factory gauge panel. This one is basic... speedo, fuel gauge, generator and oil pressure lights, and turn signals. Everything worked when I pulled it out. This one has the hole for the choke cable. $30 plus shipping?

Rear door guides. These are from a barn door burb, but I think they are the same guides used for the hatch on tailgate burbs, and maybe even the Blazers. $10 plus shipping. EDIT: I've just been informed these will NOT fit Blazer hatches. Now I'm also skeptical about the Suburban hatches.

Complete parking brake setup, from dash handle to drum levers. My burb is a trailing arm truck, and used the pull handle under the column. This worked great in the truck. It is totally restorable. $30 plus shipping.

I also have one each glove box liner ... One for non-a/c (Brand new), and one for a/c (used, but was newly installed just before I bought my truck). $5 each plus shipping.

Manual steering gear box. Its greasy, and leaks a bit, but has very little play. Comes with old, raggety rag joint and pitman arm. $20 plus shipping.

Still trying to figure out the whole picture thing here, but if you PM me a phone number or email, I'll be more than happy to send pictures.

I'm not about making money here. I just want to get rid of stuff someone may be able to use, and show the better half I "sold" my spare parts.

**Getter-Done** · 02-10-2019, 04:47 PM

I will take the wiring harness.

carryall · 02-10-2019, 05:18 PM

I'll take door guides and gauge cluster if no cracks. I would li,e to see pics. 304-712-5781 . Thanks

**Getter-Done** · 02-10-2019, 05:29 PM

Money sent for harness.
Thanks

.

**1968k20** · 02-11-2019, 07:47 AM

Do you still have the barn doors?

gearboxx70 · 02-11-2019, 10:29 AM

1968k20, I do still have the barn doors, but they aren't for sale. I'm just selling original parts I've replaced with aftermarket ones.

gearboxx70 · 02-11-2019, 11:56 PM

Getter-Done, I just sent you a PM with a tracking number for your package.

Everyone else... Gauge cluster and door guides are still available. (Cluster needs to go in a pretty big box to protect it from shipping damage, so shipping cost is around $50.)

**1rippen6** · 02-12-2019, 01:15 AM

Can I get a picture of the door guides to 717-372-1830

HIGHWAY BY THE SEA · 02-12-2019, 06:21 PM

Picture of the heater boxes?

gearboxx70 · 02-12-2019, 09:31 PM

Quote:

Originally Posted by HIGHWAY BY THE SEA

Picture of the heater boxes?

Highway by the Sea, can you send me a PM with an email address or phone number I can text pictures to? I'm a bit of a neanderthal when it comes to getting pictures from my phone to this forum.

**Getter-Done** · 02-19-2019, 12:37 AM

Got the harness Today.
Thanks for sharing.
Great Deal.
Thanks for the Complete harness it will
help a lot.

**michael bustamante** · 03-22-2019, 02:49 PM

how much t ship the non AC glove box liner?

gearboxx70 · 03-23-2019, 01:29 PM

Quote:

Originally Posted by michael bustamante

how much t ship the non AC glove box liner?

I don't have it right in front of me, but due to size, probably about $15.

02-10-2019, 04:10 PM	#1
gearboxx70 Registered User Join Date: Dec 2012 Location: Grass Valley,CA Posts: 85	1967 Suburban take offs Trying to get rid of some stuff I hate to throw away if someone can use it for a restoration... I have a complete heater box (inner and outer, with fan and new gasket kit that may or may not be complete). The inner box has one rusted corner that looks to be an easy repair. No control panel, but it comes with control cables. $20 plus shipping? Mostly complete wire harness. I know there's some guys that want these to restore the fuse block, or grab the factory connectors from. Includes the fuse block and factory bulhead connector. $10 bucks plus shipping? SOLD! Factory drum/drum booster/master cyl. Comes with mounting bracket, push rod, proportion block. $30 plus shipping? Factory gauge panel. This one is basic... speedo, fuel gauge, generator and oil pressure lights, and turn signals. Everything worked when I pulled it out. This one has the hole for the choke cable. $30 plus shipping? Rear door guides. These are from a barn door burb, but I think they are the same guides used for the hatch on tailgate burbs, and maybe even the Blazers. $10 plus shipping. EDIT: I've just been informed these will NOT fit Blazer hatches. Now I'm also skeptical about the Suburban hatches. Complete parking brake setup, from dash handle to drum levers. My burb is a trailing arm truck, and used the pull handle under the column. This worked great in the truck. It is totally restorable. $30 plus shipping. I also have one each glove box liner ... One for non-a/c (Brand new), and one for a/c (used, but was newly installed just before I bought my truck). $5 each plus shipping. Manual steering gear box. Its greasy, and leaks a bit, but has very little play. Comes with old, raggety rag joint and pitman arm. $20 plus shipping. Still trying to figure out the whole picture thing here, but if you PM me a phone number or email, I'll be more than happy to send pictures. I'm not about making money here. I just want to get rid of stuff someone may be able to use, and show the better half I "sold" my spare parts. Last edited by gearboxx70; 02-12-2019 at 09:28 PM.

02-10-2019, 04:47 PM	#2
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,696	Re: 1967 Suburban take offs I will take the wiring harness. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

02-10-2019, 05:18 PM	#3
carryall Registered User Join Date: Jan 2000 Location: ROMNEY, WV USA Posts: 304	Re: 1967 Suburban take offs I'll take door guides and gauge cluster if no cracks. I would li,e to see pics. 304-712-5781 . Thanks __________________ 1967 Chevy Truck 1969 Chevy Panel Truck work in progress 1971 GMC 1500 all orginal 1972 Chevy Suburban brought from orignal owner 1984 Dodge Rampage 45,000 original miles 1992 Dodge D150 1994 Buick Roadmaster (LT1 Engine) 2000 Chevy Stepside Z71 2008 Honda Element

02-10-2019, 05:29 PM	#4
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,696	Re: 1967 Suburban take offs Money sent for harness. Thanks . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

02-11-2019, 07:47 AM	#5
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,618	Re: 1967 Suburban take offs Do you still have the barn doors? __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

02-11-2019, 10:29 AM	#6
gearboxx70 Registered User Join Date: Dec 2012 Location: Grass Valley,CA Posts: 85	Re: 1967 Suburban take offs 1968k20, I do still have the barn doors, but they aren't for sale. I'm just selling original parts I've replaced with aftermarket ones.

02-11-2019, 11:56 PM	#7
gearboxx70 Registered User Join Date: Dec 2012 Location: Grass Valley,CA Posts: 85	Re: 1967 Suburban take offs Getter-Done, I just sent you a PM with a tracking number for your package. Everyone else... Gauge cluster and door guides are still available. (Cluster needs to go in a pretty big box to protect it from shipping damage, so shipping cost is around $50.)

02-12-2019, 01:15 AM	#8
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,694	Re: 1967 Suburban take offs Can I get a picture of the door guides to 717-372-1830

02-12-2019, 06:21 PM	#9
HIGHWAY BY THE SEA Registered User Join Date: Nov 2012 Location: BY THE CAROLINA SEA Posts: 917	Re: 1967 Suburban take offs Picture of the heater boxes? __________________ FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed http://67-72chevytrucks.com/vboard/s...d.php?t=584617 PROJECT JIGSAW 1967 GMC C3500 GREAT WHITE 1986 Blazer M1009

02-19-2019, 12:37 AM	#11
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,696	Re: 1967 Suburban take offs Got the harness Today. Thanks for sharing. Great Deal. Thanks for the Complete harness it will help a lot. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

03-22-2019, 02:49 PM	#12
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	Re: 1967 Suburban take offs how much t ship the non AC glove box liner? __________________ 1967custom

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.