IN Parting Out a 1967 Chevy C20 Small Back Window, Long Bed - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 02-23-2012, 11:10 PM

Quote:

Originally Posted by MadnessBigBlock

paypal payment sent. Thanks, Brett

Received, I should have the parts sent out tomorrow. Thanks

Quote:

Originally Posted by nplocoman

Pm with address sent.

Received, I should have the parts sent out tomorrow. Thanks

**Todd68Chevy** · 02-24-2012, 01:54 PM

Quote:

Originally Posted by nplocoman

Paypal sent, thanks.

Quote:

Originally Posted by MadnessBigBlock

paypal payment sent. Thanks, Brett

Parts are in the mail. Let me know if there is any issues. Thanks

tac106842 · 02-25-2012, 12:29 PM

Do you still have the rear bumper brackets? What kind of shape are they in? I have a 68 c10 with coil springs and would like to get oem if possible. I am interested in them if they are original and not all rusted through. If you have time post some pics of them. My zip is 43402 for shipping. Thanks!

**Todd68Chevy** · 02-25-2012, 10:48 PM

Quote:

Originally Posted by tac106842

Do you still have the rear bumper brackets? What kind of shape are they in? I have a 68 c10 with coil springs and would like to get oem if possible. I am interested in them if they are original and not all rusted through. If you have time post some pics of them. My zip is 43402 for shipping. Thanks!

This truck had some really rusted homemade looking brackets on it. Sorry Are you wanting them for a step bumper or sport bumper?

tac106842 · 02-26-2012, 09:38 AM

I am going to put a sport bumper on my truck.
Posted via Mobile Device

**Todd68Chevy** · 02-27-2012, 09:22 AM

Quote:

Originally Posted by timzrides

I'll take steering wheel. PM me payment info. PO money order would work best.

thanks,

tim

Just wanted to let you know, if you sent out payment I have not received anything yet. Not a big deal but I just wanted you to know so you did not think I was holding your parts.

Quote:

Originally Posted by daves71k5

Todd that would be great, I would like everything to match if possible. thanks Dave

Quote:

Originally Posted by Todd68Chevy

The outer bezel on the switch has some damage. Key is worn but the key code number is even still there. I do have the door locks also. I would take $10.00 for both door lock cylinders, levers and retainers. The shipping would be $8.75. That would be a total of $48.75 for all of it. Thanks

**** The electrical switch looks good but I do not know that it is good ****

Are you still interested? I have not seen where you have responded and I wanted to make sure I did not miss something.

Quote:

Originally Posted by tac106842

I am going to put a sport bumper on my truck.
Posted via Mobile Device

I do not have any trucks with a sport style rear bumper at this time. Sorry

**Todd68Chevy** · 02-29-2012, 09:37 PM

Quote:

Originally Posted by 1967chevyswb

Do you have door panels left. If so how much for the panels with shipping to 67401. Thank you

Are you still looking for door panels? I have these that I am asking $50.00 for the pair plus shipping ($16.00 Parcel Post or $26.00 Priority Mail) Thanks

**Todd68Chevy** · 02-29-2012, 09:39 PM

More door panel pictures.

REEDS 72 · 02-29-2012, 10:34 PM

Hi is the right side front inner fender any good I did not read all of this thred so maby you allredy talked about it ok just wondering thanks.

**Todd68Chevy** · 03-01-2012, 01:22 PM

Quote:

Originally Posted by REEDS 72

Hi is the right side front inner fender any good I did not read all of this thred so maby you allredy talked about it ok just wondering thanks.

The right inner fender does have some rust but better than most in this area. I am trying to sell the front end complete but I have not heard back from a local guy that was interested. If he does not buy it I will list it on here. I have had one guy ask about it on here already. If I part it out I will check with you and see if your interested but I am sure the shipping will be high so it might not be worth it. Thanks

**Todd68Chevy** · 03-05-2012, 07:34 AM

TTT

If I have missed anyone or have not got prices on something I was supposed to, PLEASE let me know.

I have had a couple guys say they wanted stuff and then I have not heard back from them so if you do or do not want those items please let me know.

Thanks.

SuperHerk · 03-05-2012, 01:04 PM

price on hood hinge springs shipped to 72076?

**Todd68Chevy** · 03-05-2012, 08:34 PM

Quote:

Originally Posted by SuperHerk

price on hood hinge springs shipped to 72076?

I have this pair. $10.00 and shipping would be $10.00 so a total of $20.00 shipped. Thanks

SuperHerk · 03-06-2012, 12:11 AM

Ill take em. Pm me your payment info.
Posted via Mobile Device

**Todd68Chevy** · 03-06-2012, 07:36 AM

Quote:

Originally Posted by SuperHerk

Ill take em. Pm me your payment info.
Posted via Mobile Device

PM sent, Thanks

tlandon67 · 03-06-2012, 02:38 PM

What would you take for the glovebox door and the floor vent handles? Thanks!

**Todd68Chevy** · 03-06-2012, 10:05 PM

Here are some close up pictures. If you want more just let me know. I would take $35.00 plus shipping for the glove box door and both vent handles. Let me know a zip code and I can figure shipping. Thanks

**Todd68Chevy** · 03-06-2012, 10:06 PM

couple more pictures.

tlandon67 · 03-07-2012, 02:01 PM

I'll take the vent handles for sure. On the glove box door, are any of the scratches or marks on the black textured part deep, or could they be cleaned and hit with a light coat of paint? I tried to restore my original door and I cant get the texture paint from Eastwood to look like I want. Shipping would be to 73142. Thanks for your reply and good find on that truck.

**Todd68Chevy** · 03-07-2012, 08:53 PM

Quote:

Originally Posted by tlandon67

I'll take the vent handles for sure. On the glove box door, are any of the scratches or marks on the black textured part deep, or could they be cleaned and hit with a light coat of paint? I tried to restore my original door and I cant get the texture paint from Eastwood to look like I want. Shipping would be to 73142. Thanks for your reply and good find on that truck.

I do not see any scratches. I tried to get some more pictures but the lighting did not work very good. The shipping for both would be $15.45. Thanks

**Todd68Chevy** · 03-07-2012, 08:55 PM

Quote:

Originally Posted by SuperHerk

Ill take em. Pm me your payment info.
Posted via Mobile Device

They are in the mail. Let me know if there is any issues. Thanks

tlandon67 · 03-08-2012, 01:41 PM

Thanks for the additional Pictures. It looks good to me. Price and shipping works for me as well. Pm me with payment info. Thanks!

MadnessBigBlock · 03-08-2012, 02:16 PM

do you still have the rear glass? If you do is it soft ray? If it is how much shipped to 58265 Thanks, Brett.
Posted via Mobile Device

**Todd68Chevy** · 03-08-2012, 09:05 PM

Quote:

Originally Posted by MadnessBigBlock

do you still have the rear glass? If you do is it soft ray? If it is how much shipped to 58265 Thanks, Brett.
Posted via Mobile Device

Yes I cut the back of the cab off incase some one wanted to repair a small window or wanted to make a large window a small window cab. I looked at the glass but the emblem in the right lower corner is hard to read. I think it reads "Safety Plate L O F Solid Tempered M52" I do not see where it says Soft Ray anywhere. Would it be somewhere else?

**Todd68Chevy** · 03-09-2012, 11:55 PM

Quote:

Originally Posted by timzrides

I'll take steering wheel. PM me payment info. PO money order would work best.

thanks,

tim

Quote:

Originally Posted by daves71k5

Looks good, P.M. me your payment info and I will get $ sent to you. thanks Dave

I have not heard from either of these members or seen payment so the steering wheel, ignition lock assy. and door locks are back up for sale.

02-25-2012, 12:29 PM	#78
tac106842 Registered User Join Date: Mar 2010 Location: Van Buren, ohio Posts: 69	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed Do you still have the rear bumper brackets? What kind of shape are they in? I have a 68 c10 with coil springs and would like to get oem if possible. I am interested in them if they are original and not all rusted through. If you have time post some pics of them. My zip is 43402 for shipping. Thanks!

02-26-2012, 09:38 AM	#80
tac106842 Registered User Join Date: Mar 2010 Location: Van Buren, ohio Posts: 69	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed I am going to put a sport bumper on my truck. Posted via Mobile Device

02-29-2012, 09:39 PM	#83
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed More door panel pictures. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

02-29-2012, 10:34 PM	#84
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed Hi is the right side front inner fender any good I did not read all of this thred so maby you allredy talked about it ok just wondering thanks.

03-05-2012, 07:34 AM	#86
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed TTT If I have missed anyone or have not got prices on something I was supposed to, PLEASE let me know. I have had a couple guys say they wanted stuff and then I have not heard back from them so if you do or do not want those items please let me know. Thanks. __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

03-05-2012, 01:04 PM	#87
SuperHerk Registered User Join Date: Aug 2011 Location: Little Rock, AR Posts: 28	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed price on hood hinge springs shipped to 72076?

03-06-2012, 12:11 AM	#89
SuperHerk Registered User Join Date: Aug 2011 Location: Little Rock, AR Posts: 28	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed Ill take em. Pm me your payment info. Posted via Mobile Device

03-06-2012, 02:38 PM	#91
tlandon67 Registered User Join Date: Feb 2012 Location: Tecumseh, Oklahoma Posts: 12	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed What would you take for the glovebox door and the floor vent handles? Thanks!

03-06-2012, 10:05 PM	#92
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed Here are some close up pictures. If you want more just let me know. I would take $35.00 plus shipping for the glove box door and both vent handles. Let me know a zip code and I can figure shipping. Thanks Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

03-06-2012, 10:06 PM	#93
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed couple more pictures. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

03-07-2012, 02:01 PM	#94
tlandon67 Registered User Join Date: Feb 2012 Location: Tecumseh, Oklahoma Posts: 12	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed I'll take the vent handles for sure. On the glove box door, are any of the scratches or marks on the black textured part deep, or could they be cleaned and hit with a light coat of paint? I tried to restore my original door and I cant get the texture paint from Eastwood to look like I want. Shipping would be to 73142. Thanks for your reply and good find on that truck.

03-08-2012, 01:41 PM	#97
tlandon67 Registered User Join Date: Feb 2012 Location: Tecumseh, Oklahoma Posts: 12	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed Thanks for the additional Pictures. It looks good to me. Price and shipping works for me as well. Pm me with payment info. Thanks!

03-08-2012, 02:16 PM	#98
MadnessBigBlock Registered User Join Date: May 2008 Location: Neche, North Dakota/Winnipeg, Manitoba Posts: 605	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed do you still have the rear glass? If you do is it soft ray? If it is how much shipped to 58265 Thanks, Brett. Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.