The 1947 - Present Chevrolet & GMC Truck Message Board Network

Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board


Thread Tools Display Modes
Old 04-30-2019, 04:47 AM   #1
Registered User
fredscarryall's Avatar
Join Date: Feb 2010
Location: gresham oregon
Posts: 804
Main brake line size

I have a 1990 454 SS truck. I have replaced my back brake lines from the axle tee to both rear disc with stainless steel lines I want to start slowly moving my way forward. I have heard the line that goes from tee rear axle tee to the proportion valve is 1/4 and some say 3/16. Has any rewho had replaced this line know what size it is. I was also needing to know what size inverted double flare for the inlet tee is on the rear axle and also what size double inverted thread the line coming out the rear proportion/combo valve. I removed the abs set up and put the line that was hook up to the abs dump valve directly to the proportion valve. Its been so long since I did this ,I lost the notes I took that told me sizes Of everything. Also heard that the factory put in a union about a foot after the line that comes out of the proportion valve to the rear brakes. See pic
Attached Images

Last edited by fredscarryall; 04-30-2019 at 05:24 AM.
fredscarryall is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 11:21 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013