$999 for a Dropmember

[GMBowtie79]

Originally Posted by porterbuilt

Somebody's been doing their research! Thanks for the help... you obviously type faster than I do!

Also, I had another member/future Dropmember owner find another good deal on a rack and pinion unit from Summit.

Summit part# SUM-770603 it runs $195.95.

http://store.summitracing.com/partde...5&autoview=sku

You also might want to look at Speedway Motors they have a steel braded power steering hose kit that works on a 82 88 T-bird/Mustang II rack with a GM pump P/N 617-4835 for about $120 for those who are looking for that little extra bling. www.speedwaymotors.com

[PBFAB.COM]

Originally Posted by GMBowtie79

You also might want to look at Speedway Motors they have a steel braded power steering hose kit that works on a 82 88 T-bird/Mustang II rack with a GM pump P/N 617-4835 for about $120 for those who are looking for that little extra bling. www.speedwaymotors.com

I haven't used any line kits from Speedway, and would recommend making a phone call to verify it will work... and has ALL the fittings. I know the T-bird rack differs from the Mustang... not sure if the threads for the lines would be different (it would make sense for them to be the same, but...)

I have used a few different line kits from a few different companies. Borgeson is the preferred choice. Their kits have ALL the necessary fittings, and are very affordable. They offer the rubber lines or the braided stainless.

[FnLow69]

Originally Posted by GMBowtie79

You also might want to look at Speedway Motors they have a steel braded power steering hose kit that works on a 82 88 T-bird/Mustang II rack with a GM pump P/N 617-4835 for about $120 for those who are looking for that little extra bling. www.speedwaymotors.com

I've tried one from fatman fabrication and the hose itself was plastic and trying to put the fittings on was a big pain. Not sure what speedways hoses are made of but just for fyi i tought it was not worth the money...