How is this removed? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

79wagon · 11-08-2010, 10:34 PM

Im wondering how to remove the lower panel that holds the barn door latches on a 69 panel. Mine is completely rotted out, but i found one at a scrap yard, the only problem is its a upullit only yard and no torches are allowed. The panel in question goes where the yellow box is in the photo below. Any help would be appreciated

*sharpie1972* · 11-08-2010, 11:37 PM

They are "basically" an unbolt item, but it's quite a bit of work. Cutting the plywood floor on the donor vehicle helps. The hard part is getting the panel out once everything is unbolted. You really need to either lift the body off the frame or cut the rear frame rails so you can drop this piece straight down. I'll post a few pics of one removed so you have an idea of what you are dealing with. Sharpie

*sharpie1972* · 11-08-2010, 11:42 PM

Mine is from a clam shell, but yours should be the same, less hinges. Sharpie

79wagon · 11-09-2010, 09:16 AM

Thanks sharpie. I cant do either (lift or Cut the frame) due to the restrictions on jacks and torches. But under the taillights its pretty rusted, so i might knock that rust out and try to work it out. Im just glad its not a welded part. lol. Again, thanks

71gmcburb · 11-09-2010, 05:55 PM

what about a battery powered saws-all? i have a yard near me that has the same restrictions but they allow batt powered tools. if you can at yours you can just cut the rear panels on the donor out and just lift it out

79wagon · 11-09-2010, 09:31 PM

I dont have a battery one though, or thatd be my plan. Ima see if anyone i know has one or knows someone with one. I hope they do, because the panel on mine is gone, literally gone. if a fly landed on it it would crumble. lol

11-08-2010, 10:34 PM	#1
79wagon Registered User Join Date: Oct 2010 Location: Austintown, OH Posts: 9	How is this removed? Im wondering how to remove the lower panel that holds the barn door latches on a 69 panel. Mine is completely rotted out, but i found one at a scrap yard, the only problem is its a upullit only yard and no torches are allowed. The panel in question goes where the yellow box is in the photo below. Any help would be appreciated __________________ 1969 Chevy C-10 Panel truck 350 3OTT 1979 Chevy Malibu wagon 200 Auto 1985 Honda Accord SOHC Auto 1987 Jeep Comanche 2.5L 4spd 1991 Dodge Dakota 3.9L Auto

11-08-2010, 11:37 PM	#2
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: How is this removed? They are "basically" an unbolt item, but it's quite a bit of work. Cutting the plywood floor on the donor vehicle helps. The hard part is getting the panel out once everything is unbolted. You really need to either lift the body off the frame or cut the rear frame rails so you can drop this piece straight down. I'll post a few pics of one removed so you have an idea of what you are dealing with. Sharpie

11-08-2010, 11:42 PM	#3
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: How is this removed? Mine is from a clam shell, but yours should be the same, less hinges. Sharpie Attached Images

11-09-2010, 09:16 AM	#4
79wagon Registered User Join Date: Oct 2010 Location: Austintown, OH Posts: 9	Re: How is this removed? Thanks sharpie. I cant do either (lift or Cut the frame) due to the restrictions on jacks and torches. But under the taillights its pretty rusted, so i might knock that rust out and try to work it out. Im just glad its not a welded part. lol. Again, thanks __________________ 1969 Chevy C-10 Panel truck 350 3OTT 1979 Chevy Malibu wagon 200 Auto 1985 Honda Accord SOHC Auto 1987 Jeep Comanche 2.5L 4spd 1991 Dodge Dakota 3.9L Auto

11-09-2010, 05:55 PM	#5
71gmcburb Registered User Join Date: Oct 2010 Location: everett washington Posts: 382	Re: How is this removed? what about a battery powered saws-all? i have a yard near me that has the same restrictions but they allow batt powered tools. if you can at yours you can just cut the rear panels on the donor out and just lift it out __________________ a wise man once said "There are only two real rules to life... 1 - Don't sweat the small stuff 2 - Everything is small stuff

11-09-2010, 09:31 PM	#6
79wagon Registered User Join Date: Oct 2010 Location: Austintown, OH Posts: 9	Re: How is this removed? I dont have a battery one though, or thatd be my plan. Ima see if anyone i know has one or knows someone with one. I hope they do, because the panel on mine is gone, literally gone. if a fly landed on it it would crumble. lol __________________ 1969 Chevy C-10 Panel truck 350 3OTT 1979 Chevy Malibu wagon 200 Auto 1985 Honda Accord SOHC Auto 1987 Jeep Comanche 2.5L 4spd 1991 Dodge Dakota 3.9L Auto



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.