New 64 Stepper Project - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**The Rocknrod** · 02-07-2018, 06:24 PM

Anyway here is the back-side of the frame where the power steering gear box is mounted. Before the powdercoating I had a hole or two welded up. I used grade 8 bolts and extra heavy washers as well as blue locktite and lock washers.

zachiatrist · 02-07-2018, 07:10 PM

Dang, just saw this. Really clean build going on here. Looks like every little nook and cranny is buffed to perfection. Superb work!

**The Rocknrod** · 02-07-2018, 07:44 PM

Quote:

Originally Posted by zachiatrist

Dang, just saw this. Really clean build going on here. Looks like every little nook and cranny is buffed to perfection. Superb work!

Thanks but I have much cleaning to do before it's ready for prime time.

**The Rocknrod** · 02-10-2018, 07:42 PM

Okay finished the brake bleeding front and rear. Then operated the electric parking brake unit to adjust the rear brake travel. Since one sides cable is longer than the other I had to make sure they travel the same, so now they do.

**The Rocknrod** · 03-25-2018, 05:51 PM

Worked on re-fitting the radiator and side baffles. I had previously made the top front baffle so I installed the rubber and re-fit it all together to see (post paint) how it looked. What do you think so far?

**Joe Pass** · 03-25-2018, 08:06 PM

Man that sure looks good.....Hope the hood spring mod works for you....
Joe

**Captainfab** · 03-25-2018, 11:42 PM

Looks good to me

**The Rocknrod** · 03-26-2018, 11:35 AM

So here is a closeup of the top radiator seal I was talking about. I plan on using the hood anti rattle rubber that comes with three pieces in the kit, since I have one for the side I need another for the other side of the radiator if anyone has a spare.

Instead of the folded over rubber, I will Plastic-dip the end.

**Palf70Step** · 03-27-2018, 07:36 AM

That looks good!

**The Rocknrod** · 03-27-2018, 08:39 AM

Quote:

Originally Posted by Joe Pass

Man that sure looks good.....Hope the hood spring mod works for you....Joe

Thanks

Quote:

Originally Posted by Captainfab

Looks good to me

Cool.

Quote:

Originally Posted by Palf70Step

That looks good!

Thank you.

**The Rocknrod** · 04-10-2018, 12:20 PM

Installed the lower radiator seal and then stapled it all in. Actually used super weatherstrip adhesive (3M) and wire and patience but it looks okay.

**The Rocknrod** · 04-10-2018, 12:21 PM

Then I put together the grill and headlight brackets getting ready to put the grille together and wire it in.

Pinchecharlie · 04-10-2018, 07:29 PM

Wow looks great! You mind telling me your solution to having the proportion valve hanging off the master? Did you build a bracket for it on the frame rail? I am not to happy with the lines all cluttered in the engine bay and yours look perfect.

**The Rocknrod** · 04-10-2018, 08:32 PM

Quote:

Originally Posted by Pinchecharlie

Wow looks great! You mind telling me your solution to having the proportion valve hanging off the master? Did you build a bracket for it on the frame rail? I am not to happy with the lines all cluttered in the engine bay and yours look perfect.

Thank you.
Starting on page #7 at post #171 I explain it. http://67-72chevytrucks.com/vboard/s...=666226&page=7

**The Rocknrod** · 04-17-2018, 04:20 PM

I've been wiring up my truck and also installed the wiper motor and wiper transmissions. I had to wire wheel the trans paint them lube them etc. They run perfect after I got the switch dialed in, they even park.

**The Rocknrod** · 04-28-2018, 04:49 PM

Started wiring the truck, not finished but you get the idea:

**Joe Pass** · 04-28-2018, 10:00 PM

Very clean work.....

**pdxhall** · 04-29-2018, 01:07 AM

Your wiring looks great. I'm just a little behind you. I've got the fuse panel mounted and I spent about 3 hrs. today untangling wires. This nice work gives me motivation.

**The Rocknrod** · 04-29-2018, 09:39 AM

Thanks guys, ya those wires are a mess when you get them I never thought I'd get this far. I had to buy some terminals for the fuse panel and replace a couple wires I thought were too small and remove a couple I wasn't using. That gave me the opportunity to clean it up. In case you want to know - http://www.repairconnector.com/produ...52d14-AWG.html

**The Rocknrod** · 04-30-2018, 05:32 PM

I was trying to make sure I bought the right speedo cable so I took an extra piece of 3/16" tube and ran a 63" length from the gauges to the trans are where the planned 200R4 threaded connection will be. So I am sure that it will work.
I know that the ATP Y-804 Speedo cable is 5/8"-18 gauge end and 7/8"-18 Trans end at 63" long.

**Joe Pass** · 04-30-2018, 07:27 PM

I'll be interested in how the 200r4 works for you.....considered that myself since its a direct replacement for my T350......

**The Rocknrod** · 04-30-2018, 09:31 PM

Sent you a PM Joe.

**The Rocknrod** · 05-03-2018, 03:53 PM

Quote:

Originally Posted by Pinchecharlie

Wow looks great! You mind telling me your solution to having the proportion valve hanging off the master? Did you build a bracket for it on the frame rail? I am not to happy with the lines all cluttered in the engine bay and yours look perfect.

Another way to skin a cat - I just saw this pic from Clemdaddy's post. See the proportioning valve on the inside of the frame?

**The Rocknrod** · 05-08-2018, 07:01 PM

I started working on the hood lamps. I used an American Autowire grommet for the firewall plug for the hood wires to include a ground wire to the lights, I used some push-mount wire ties in the interior of the hood wiring, they are hard to even notice. The pad isnt installed in the hood on the pic below, hard to see with so much red.

**The Rocknrod** · 05-08-2018, 07:04 PM

I plan to use F6 wire covering for most of the wire but it hasnt arrived yet so I got started anyway. I'll change it out when it arrives.

02-07-2018, 06:24 PM	#176
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Anyway here is the back-side of the frame where the power steering gear box is mounted. Before the powdercoating I had a hole or two welded up. I used grade 8 bolts and extra heavy washers as well as blue locktite and lock washers. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

02-07-2018, 07:10 PM	#177
zachiatrist Registered User Join Date: Nov 2017 Location: Los Angeles Posts: 24	Re: New 64 Stepper Project Dang, just saw this. Really clean build going on here. Looks like every little nook and cranny is buffed to perfection. Superb work! __________________ - 1964 Chevy C10 "Honeydew" http://instagram.com/zachiatrist http://zachiatrist.com

02-10-2018, 07:42 PM	#179
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Okay finished the brake bleeding front and rear. Then operated the electric parking brake unit to adjust the rear brake travel. Since one sides cable is longer than the other I had to make sure they travel the same, so now they do. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

03-25-2018, 05:51 PM	#180
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Worked on re-fitting the radiator and side baffles. I had previously made the top front baffle so I installed the rubber and re-fit it all together to see (post paint) how it looked. What do you think so far? Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

03-25-2018, 08:06 PM	#181
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project Man that sure looks good.....Hope the hood spring mod works for you.... Joe __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

03-25-2018, 11:42 PM	#182
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: New 64 Stepper Project Looks good to me __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-26-2018, 11:35 AM	#183
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project So here is a closeup of the top radiator seal I was talking about. I plan on using the hood anti rattle rubber that comes with three pieces in the kit, since I have one for the side I need another for the other side of the radiator if anyone has a spare. Instead of the folded over rubber, I will Plastic-dip the end. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

03-27-2018, 07:36 AM	#184
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,611	Re: New 64 Stepper Project That looks good! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-10-2018, 12:20 PM	#186
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Installed the lower radiator seal and then stapled it all in. Actually used super weatherstrip adhesive (3M) and wire and patience but it looks okay. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-10-2018, 12:21 PM	#187
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Then I put together the grill and headlight brackets getting ready to put the grille together and wire it in. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-10-2018, 07:29 PM	#188
Pinchecharlie Registered User Join Date: Apr 2017 Location: Bozeman Posts: 219	Re: New 64 Stepper Project Wow looks great! You mind telling me your solution to having the proportion valve hanging off the master? Did you build a bracket for it on the frame rail? I am not to happy with the lines all cluttered in the engine bay and yours look perfect.

04-17-2018, 04:20 PM	#190
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project I've been wiring up my truck and also installed the wiper motor and wiper transmissions. I had to wire wheel the trans paint them lube them etc. They run perfect after I got the switch dialed in, they even park. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-28-2018, 04:49 PM	#191
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Started wiring the truck, not finished but you get the idea: Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-28-2018, 10:00 PM	#192
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project Very clean work..... __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

04-29-2018, 01:07 AM	#193
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,057	Re: New 64 Stepper Project Your wiring looks great. I'm just a little behind you. I've got the fuse panel mounted and I spent about 3 hrs. today untangling wires. This nice work gives me motivation. __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.



Register or Log In To remove these advertisements.

04-29-2018, 09:39 AM	#194
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Thanks guys, ya those wires are a mess when you get them I never thought I'd get this far. I had to buy some terminals for the fuse panel and replace a couple wires I thought were too small and remove a couple I wasn't using. That gave me the opportunity to clean it up. In case you want to know - http://www.repairconnector.com/produ...52d14-AWG.html __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-30-2018, 05:32 PM	#195
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project I was trying to make sure I bought the right speedo cable so I took an extra piece of 3/16" tube and ran a 63" length from the gauges to the trans are where the planned 200R4 threaded connection will be. So I am sure that it will work. I know that the ATP Y-804 Speedo cable is 5/8"-18 gauge end and 7/8"-18 Trans end at 63" long. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-30-2018, 07:27 PM	#196
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project I'll be interested in how the 200r4 works for you.....considered that myself since its a direct replacement for my T350...... __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

04-30-2018, 09:31 PM	#197
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Sent you a PM Joe. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-08-2018, 07:01 PM	#199
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project I started working on the hood lamps. I used an American Autowire grommet for the firewall plug for the hood wires to include a ground wire to the lights, I used some push-mount wire ties in the interior of the hood wiring, they are hard to even notice. The pad isnt installed in the hood on the pic below, hard to see with so much red. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-08-2018, 07:04 PM	#200
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project I plan to use F6 wire covering for most of the wire but it hasnt arrived yet so I got started anyway. I'll change it out when it arrives. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

Register or Log In To remove these advertisements.