AZ 1960 Chevy truck part out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ndgcdg · 06-06-2019, 08:36 PM

Going to keep adding pictures to this post as more parts come off. All came off a 1960 truck.

Grill support (60-62): 300
Radiator support (60-62): 115
Inner fenders (60-66): 125 each
Battery tray (60-66): 45
Lower steering column cover (60-66): $35

Located in Arizona and can ship. Everything is for sale here, on our website, and Facebook/Instagram so parts may sell off forum without notice.

ndgcdg · 06-06-2019, 08:40 PM

1960 Chevy truck grill: 400 complete. Some damage to one bezel
1960 high low beam switch plate: 75

ndgcdg · 06-07-2019, 08:03 PM

Complete deluxe heater setup (should fit 60 - 63). Engine compartment box, heater core, nice 4 lever controls, defrost vents, harnesses, and bolts. Asking $500 for whole setup.

6 lug 3 clip 15 inch rims. Have 4 available. Asking $340 for the set.

1960 hood emblem: $100

1960 / 1961 hood latch, good working condition: $75

1960 directional bezels: $175 pair

Front bumper brackets (60-66) : $45 pair

Brad54 · 06-07-2019, 10:00 PM

How solid is the core support?
Might have to made a change to the shipping quote on the hood brace!
-Brad

ndgcdg · 06-08-2019, 12:09 AM

Quote:

Originally Posted by Brad54

How solid is the core support?
Might have to made a change to the shipping quote on the hood brace!
-Brad

The core support is in nice shape. No rust on it and straight. Shipping them together UPS would probably cost an arm and a leg. Hood brace is long and skinny and core support will add some width and weight. Is there any other parts you are looking for? Could load them all up on a pallet and ship fastenal or freight

**macs61** · 06-08-2019, 07:08 PM

Do you have hood latch parts l have a 61 c10 l believe they changed in 62

ndgcdg · 06-09-2019, 12:06 AM

Quote:

Originally Posted by macs61

Do you have hood latch parts l have a 61 c10 l believe they changed in 62

I have the hood side part in good working condition. Asking $75 plus shipping.

doobiebro · 06-12-2019, 05:36 PM

How much to ship inner fender D/S to NM 88081? Any rot on the ends? Hard to see on the drivers side/left side. Thanx.

ndgcdg · 06-12-2019, 06:45 PM

Quote:

Originally Posted by doobiebro

How much to ship inner fender D/S to NM 88081? Any rot on the ends? Hard to see on the drivers side/left side. Thanx.

Shipping came up $52 ups. No rot on the driver side, real nice inner

doobiebro · 06-13-2019, 04:11 PM

Quote:

Originally Posted by ndgcdg

Shipping came up $52 ups. No rot on the driver side, real nice inner

I will pm you. Thanks

doobiebro · 06-20-2019, 03:53 PM

Received the inner fender (d/s) as describe...Perfect. I was afraid when I heard it was coming from UPS because of 3 prior packages I received were damaged. Packaged very well for added protection and I thank you ndgcdg. I will be doing more business with you my friend.

Deathwish · 08-07-2019, 02:44 PM

Do you happen to have a drivers door?

What about the 60 hood?

ndgcdg · 08-21-2019, 06:08 PM

Quote:

Originally Posted by Deathwish

Do you happen to have a drivers door?

What about the 60 hood?

I dont have any great doors right now. This is my only 60 hood
https://www.aspenautoaz.com/store/p8...ose-chevy.html

gnuhaus · 08-26-2019, 08:14 PM

Is the grill still available? Shipping to 36330?

nhtc33d · 09-02-2019, 05:24 PM

Do you have any rust free portions of a 60-63 cab.
It would be the upper section (inner and outer) above windshield including a portion of both A pillars.

**61ChevyPanel** · 10-08-2019, 03:09 AM

Is the high/low beam switch plate cover still available? Shipping to 91301? Thanks.

Leroy-B1 · 10-10-2019, 11:53 AM

rear bumper or tailgate?

06-06-2019, 08:36 PM	#1
ndgcdg Registered User Join Date: Jun 2011 Location: fountain hills arizona Posts: 359	1960 Chevy truck part out Going to keep adding pictures to this post as more parts come off. All came off a 1960 truck. Grill support (60-62): 300 Radiator support (60-62): 115 Inner fenders (60-66): 125 each Battery tray (60-66): 45 Lower steering column cover (60-66): $35 Located in Arizona and can ship. Everything is for sale here, on our website, and Facebook/Instagram so parts may sell off forum without notice. Attached Images __________________ Facebook Aspen Auto Instagram @aspenautoaz

06-06-2019, 08:40 PM	#2
ndgcdg Registered User Join Date: Jun 2011 Location: fountain hills arizona Posts: 359	Re: 1960 Chevy truck part out 1960 Chevy truck grill: 400 complete. Some damage to one bezel 1960 high low beam switch plate: 75 Attached Images __________________ Facebook Aspen Auto Instagram @aspenautoaz

06-07-2019, 08:03 PM	#3
ndgcdg Registered User Join Date: Jun 2011 Location: fountain hills arizona Posts: 359	Re: 1960 Chevy truck part out Complete deluxe heater setup (should fit 60 - 63). Engine compartment box, heater core, nice 4 lever controls, defrost vents, harnesses, and bolts. Asking $500 for whole setup. 6 lug 3 clip 15 inch rims. Have 4 available. Asking $340 for the set. 1960 hood emblem: $100 1960 / 1961 hood latch, good working condition: $75 1960 directional bezels: $175 pair Front bumper brackets (60-66) : $45 pair Attached Images __________________ Facebook Aspen Auto Instagram @aspenautoaz

06-07-2019, 10:00 PM	#4
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,456	Re: 1960 Chevy truck part out How solid is the core support? Might have to made a change to the shipping quote on the hood brace! -Brad __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School

06-08-2019, 07:08 PM	#6
macs61 Junior Member Join Date: Jun 2018 Location: pleasanton. ca Posts: 77	Re: 1960 Chevy truck part out Do you have hood latch parts l have a 61 c10 l believe they changed in 62

06-12-2019, 05:36 PM	#8
doobiebro Registered User Join Date: Nov 2011 Location: Chaparral NM Posts: 688	Re: 1960 Chevy truck part out How much to ship inner fender D/S to NM 88081? Any rot on the ends? Hard to see on the drivers side/left side. Thanx. __________________ CURRENT & PAST CHEVY TRUCKS 60 C-10 Apache short step side 62 C-10 short step side 66 GMC Long bed fleet side 305 V-6 77 C-20 Custom Deluxe (Blue Goose)

06-20-2019, 03:53 PM	#11
doobiebro Registered User Join Date: Nov 2011 Location: Chaparral NM Posts: 688	Re: 1960 Chevy truck part out Received the inner fender (d/s) as describe...Perfect. I was afraid when I heard it was coming from UPS because of 3 prior packages I received were damaged. Packaged very well for added protection and I thank you ndgcdg. I will be doing more business with you my friend. __________________ CURRENT & PAST CHEVY TRUCKS 60 C-10 Apache short step side 62 C-10 short step side 66 GMC Long bed fleet side 305 V-6 77 C-20 Custom Deluxe (Blue Goose)

08-07-2019, 02:44 PM	#12
Deathwish Registered User Join Date: May 2019 Location: Daphne, Al Posts: 8	Re: 1960 Chevy truck part out Do you happen to have a drivers door? What about the 60 hood?

08-26-2019, 08:14 PM	#14
gnuhaus Registered User Join Date: Aug 2019 Location: Enterprise, AL Posts: 1	Re: 1960 Chevy truck part out Is the grill still available? Shipping to 36330?

09-02-2019, 05:24 PM	#15
nhtc33d Registered User Join Date: Dec 2007 Location: PA Posts: 326	Re: 1960 Chevy truck part out Do you have any rust free portions of a 60-63 cab. It would be the upper section (inner and outer) above windshield including a portion of both A pillars. __________________ My build link.. http://67-72chevytrucks.com/vboard/s...d.php?t=285353

10-08-2019, 03:09 AM	#16
61ChevyPanel Active Member Join Date: Nov 2011 Location: Los Angeles, CA Posts: 107	Re: 1960 Chevy truck part out Is the high/low beam switch plate cover still available? Shipping to 91301? Thanks.

10-10-2019, 11:53 AM	#17
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: 1960 Chevy truck part out rear bumper or tailgate?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.