1970 Chevy C10 pickup - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OLDYELLOW · 09-03-2016, 07:04 PM

Quote:

Originally Posted by rsgt

what brand of door bottoms did you use? How was the fit? Thanks

We purchased them from Ecklers. On one of the bottoms where the door skin folds over on the side was trimmed a little short, so I had to weld a piece on. Like most reproductions, you have to make them fit.

oldyellowssun · 09-04-2016, 06:17 PM

While I stripped down the driver side quarter panel, my old man did the body work on the passenger side quarter panel.

flashed · 09-04-2016, 06:38 PM

It's looking good .

oldyellowssun · 09-18-2016, 01:02 PM

Over the past 2 weeks, we finished up the body work on the passenger side quarter panel and got it primed. The hood hinges were cleaned and painted.

In The Ten Ring · 09-18-2016, 02:02 PM

Quote:

Originally Posted by oldyellowssun

I also started to clean parts. We are using electrolysis to clean the hood hinge.

YES! Finally! A member after my own heart!!!!

I use a combination of electrolysis and Evaporust soak. First the former, followed by the latter. Much more effective over the other alone.

A sand blaster would be more efficient and effective, but I have no room for one.

OLDYELLOW · 09-18-2016, 04:46 PM

Quote:

Originally Posted by In The Ten Ring

YES! Finally! A member after my own heart!!!!

I use a combination of electrolysis and Evaporust soak. First the former, followed by the latter. Much more effective over the other alone.

A sand blaster would be more efficient and effective, but I have no room for one.

Sand blasting has its place, but on parts like hinges, latches and window cranks I like to use electrolysis. There is nothing worse than opening a hood or rolling up a window and hearing that gritty grind.

oldyellowssun · 09-18-2016, 06:28 PM

My pops fitted the lower pillar patch & cut out the passenger side floor board

oldyellowssun · 10-02-2016, 07:55 PM

Typical Reproductions

oldyellowssun · 10-02-2016, 07:58 PM

Floor board and rocker welded in on passenger side.

**IronCanine** · 10-02-2016, 09:09 PM

Looking good. I like how you let the Grand Dorito photo bomb the hinge pics. Keep the Ford pics to a minimum please. This is a GM site.

OLDYELLOW · 10-03-2016, 09:24 AM

Quote:

Originally Posted by IronCanine

Looking good. I like how you let the Grand Dorito photo bomb the hinge pics. Keep the Ford pics to a minimum please. This is a GM site.

I apologize, maybe I'll get done with the Grand Dorito soon and replace it with some GM metal.

oldyellowssun · 10-16-2016, 06:53 PM

This weekend we finished up the floor and got it painted. I also cut bolts out of the bed so that we can get it ready to take off.

**IronCanine** · 10-16-2016, 09:04 PM

Looking great. Can't see the ground anymore!

mcbassin · 10-17-2016, 04:10 PM

Very nice looking project. You have done a great job repairing the rust. Keep up the good work. Subscribed....

oldyellowssun · 10-18-2016, 08:20 PM

Quote:

Originally Posted by IronCanine

Looking great. Can't see the ground anymore!

Quote:

Originally Posted by mcbassin

Very nice looking project. You have done a great job repairing the rust. Keep up the good work. Subscribed....

Thanks!

oldyellowssun · 10-22-2016, 06:24 PM

Today we built a frame for the bed of the truck to go on. After, we took the bed off.

**IronCanine** · 10-22-2016, 07:40 PM

I recognize those blocks!

oldyellowssun · 10-23-2016, 02:30 PM

Forgot to post this yesterday. Here's a picture of the bed on the frame we built

Dad's72 · 10-23-2016, 03:23 PM

Good idea. Got any measurements on the bed roller frame

OLDYELLOW · 10-23-2016, 07:27 PM

Quote:

Originally Posted by Dad's72

Good idea. Got any measurements on the bed roller frame

6' long x 5' wide x 32" high. We bought eight 2x4x8 studs and had nothing left but a little saw dust. Found the 10" wheels at harbor freight for $4 a piece.

oldyellowssun · 10-23-2016, 08:10 PM

Quote:

Originally Posted by OLDYELLOW

6' long x 5' wide x 32" high. We bought eight 2x4x8 studs and had nothing left but a little saw dust. Found the 10" wheels at harbor freight for $4 a piece.

Dad, I hope these are the measurements that are correct after you made it 7 inches too long. We had to go back and cut off seven inches

oldyellowssun · 10-23-2016, 08:16 PM

Since we got the bed off we were able to work on the cab corner today.

Dad's72 · 10-23-2016, 11:35 PM

Quote:

Originally Posted by OLDYELLOW

6' long x 5' wide x 32" high. We bought eight 2x4x8 studs and had nothing left but a little saw dust. Found the 10" wheels at harbor freight for $4 a piece.

Thank you. Gona do this. I will have to adjust the length for my long bed. Did you just bolt it down to the 2x4?

OLDYELLOW · 10-24-2016, 07:01 AM

Quote:

Originally Posted by Dad's72

Thank you. Gona do this. I will have to adjust the length for my long bed. Did you just bolt it down to the 2x4?

Yes, so it want slide around when you push it.

mcbassin · 10-24-2016, 08:42 AM

Very nice progress on the bed and cab.

09-04-2016, 06:17 PM	#77
oldyellowssun Registered User Join Date: Apr 2016 Location: Athens Posts: 107	Re: 1970 Chevy C10 pickup While I stripped down the driver side quarter panel, my old man did the body work on the passenger side quarter panel. Attached Images __________________ I must be bright, Daddy called me sun--- http://67-72chevytrucks.com/vboard/s...d.php?t=703733

09-04-2016, 06:38 PM	#78
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,729	Re: 1970 Chevy C10 pickup It's looking good .

09-18-2016, 01:02 PM	#79
oldyellowssun Registered User Join Date: Apr 2016 Location: Athens Posts: 107	Re: 1970 Chevy C10 pickup Over the past 2 weeks, we finished up the body work on the passenger side quarter panel and got it primed. The hood hinges were cleaned and painted. Attached Images __________________ I must be bright, Daddy called me sun--- http://67-72chevytrucks.com/vboard/s...d.php?t=703733

09-18-2016, 06:28 PM	#82
oldyellowssun Registered User Join Date: Apr 2016 Location: Athens Posts: 107	Re: 1970 Chevy C10 pickup My pops fitted the lower pillar patch & cut out the passenger side floor board Attached Images __________________ I must be bright, Daddy called me sun--- http://67-72chevytrucks.com/vboard/s...d.php?t=703733

10-02-2016, 07:55 PM	#83
oldyellowssun Registered User Join Date: Apr 2016 Location: Athens Posts: 107	Re: 1970 Chevy C10 pickup Typical Reproductions Attached Images __________________ I must be bright, Daddy called me sun--- http://67-72chevytrucks.com/vboard/s...d.php?t=703733

10-02-2016, 07:58 PM	#84
oldyellowssun Registered User Join Date: Apr 2016 Location: Athens Posts: 107	Re: 1970 Chevy C10 pickup Floor board and rocker welded in on passenger side. Attached Images __________________ I must be bright, Daddy called me sun--- http://67-72chevytrucks.com/vboard/s...d.php?t=703733

10-02-2016, 09:09 PM	#85
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,535	Re: 1970 Chevy C10 pickup Looking good. I like how you let the Grand Dorito photo bomb the hinge pics. Keep the Ford pics to a minimum please. This is a GM site. __________________ 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

10-16-2016, 06:53 PM	#87
oldyellowssun Registered User Join Date: Apr 2016 Location: Athens Posts: 107	Re: 1970 Chevy C10 pickup This weekend we finished up the floor and got it painted. I also cut bolts out of the bed so that we can get it ready to take off. Attached Images __________________ I must be bright, Daddy called me sun--- http://67-72chevytrucks.com/vboard/s...d.php?t=703733

10-16-2016, 09:04 PM	#88
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,535	Re: 1970 Chevy C10 pickup Looking great. Can't see the ground anymore! __________________ 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

10-17-2016, 04:10 PM	#89
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1970 Chevy C10 pickup Very nice looking project. You have done a great job repairing the rust. Keep up the good work. Subscribed.... __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

10-22-2016, 06:24 PM	#91
oldyellowssun Registered User Join Date: Apr 2016 Location: Athens Posts: 107	Re: 1970 Chevy C10 pickup Today we built a frame for the bed of the truck to go on. After, we took the bed off. Attached Images __________________ I must be bright, Daddy called me sun--- http://67-72chevytrucks.com/vboard/s...d.php?t=703733

10-22-2016, 07:40 PM	#92
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,535	Re: 1970 Chevy C10 pickup I recognize those blocks! __________________ 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

10-23-2016, 02:30 PM	#93
oldyellowssun Registered User Join Date: Apr 2016 Location: Athens Posts: 107	Re: 1970 Chevy C10 pickup Forgot to post this yesterday. Here's a picture of the bed on the frame we built Attached Images __________________ I must be bright, Daddy called me sun--- http://67-72chevytrucks.com/vboard/s...d.php?t=703733

10-23-2016, 03:23 PM	#94
Dad's72 Registered User Join Date: Jan 2015 Location: Austin, Texas Posts: 269	Re: 1970 Chevy C10 pickup Good idea. Got any measurements on the bed roller frame

10-23-2016, 08:16 PM	#97
oldyellowssun Registered User Join Date: Apr 2016 Location: Athens Posts: 107	Re: 1970 Chevy C10 pickup Since we got the bed off we were able to work on the cab corner today. Attached Images __________________ I must be bright, Daddy called me sun--- http://67-72chevytrucks.com/vboard/s...d.php?t=703733



Register or Log In To remove these advertisements.

10-24-2016, 08:42 AM	#100
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1970 Chevy C10 pickup Very nice progress on the bed and cab. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.