power windows - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mothertrucker424 · 01-18-2008, 09:22 PM

anyone ever put power door and power windows into there manul lock and window trucks??

i can't see it being to too crazy

djracer · 01-26-2008, 02:46 PM

I did an 03 truck for a buddy! I used stock replacement motor/regulators and used a 3 switch aftermarket switch kit. I prefer nicer Dei door lock actuators and just a keyless entry for the locks!

mothertrucker424 · 01-26-2008, 09:08 PM

was it pre wired? for locks and windows could i swap in factory locks too

djracer · 01-26-2008, 09:13 PM

no it is not prewired. What year truck is it?

slug · 01-26-2008, 10:09 PM

a guy i worked with did this on a 04 chevy, he said it was relativaly strait forward, he said he had to run 3 wires to the driver side door and then from there all the way to the pass side door........... oh yea, he said it was one of those kits that had a box that fit over the manual crank shaft.

mothertrucker424 · 01-27-2008, 10:07 AM

mine is 2000 and i want factory look too

01-18-2008, 09:22 PM	#1
mothertrucker424 Registered User Join Date: Sep 2006 Location: st pete Posts: 404	power windows anyone ever put power door and power windows into there manul lock and window trucks?? i can't see it being to too crazy __________________ _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- 1972 K10 4"lift 33"tires (soon to be bigger and better) 2000 silverado 1500 2wd 2"coil spacers3" BL 285/75/16's

01-26-2008, 02:46 PM	#2
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: power windows I did an 03 truck for a buddy! I used stock replacement motor/regulators and used a 3 switch aftermarket switch kit. I prefer nicer Dei door lock actuators and just a keyless entry for the locks! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-26-2008, 09:08 PM	#3
mothertrucker424 Registered User Join Date: Sep 2006 Location: st pete Posts: 404	Re: power windows was it pre wired? for locks and windows could i swap in factory locks too __________________ _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- 1972 K10 4"lift 33"tires (soon to be bigger and better) 2000 silverado 1500 2wd 2"coil spacers3" BL 285/75/16's

01-26-2008, 09:13 PM	#4
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: power windows no it is not prewired. What year truck is it? __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-26-2008, 10:09 PM	#5
slug Registered User Join Date: Jan 2008 Location: Groves,TX Posts: 483	Re: power windows a guy i worked with did this on a 04 chevy, he said it was relativaly strait forward, he said he had to run 3 wires to the driver side door and then from there all the way to the pass side door........... oh yea, he said it was one of those kits that had a box that fit over the manual crank shaft.

01-27-2008, 10:07 AM	#6
mothertrucker424 Registered User Join Date: Sep 2006 Location: st pete Posts: 404	Re: power windows mine is 2000 and i want factory look too __________________ _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- 1972 K10 4"lift 33"tires (soon to be bigger and better) 2000 silverado 1500 2wd 2"coil spacers3" BL 285/75/16's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.