67 k20 brake line frustration

[Mts67C10K20]

Good day all
I am currently getting ready to swap out my axles for a set of 1976 d44 and a corp 14 .
The problem I am having is locating a set of pre bent stainless lines for a 67 k20 w/power brakes either stock or setup for the disks
The rear axle lines I have found for the corp 14 but nothing for the front
Any info on vendors would be appreciated
Thanks in advance

Fyi stock height

[B. W.]

You could use lines for a 71 or 72 with factory disc brakes, should drop right in. I'm not sure if the front brake hoses are in the same location on the frame so that may require some mods.

I purchased a complete set of lines from Inline tube, the front lines were the only ones that fit properly. (FWIW)

[Mts67C10K20]

Originally Posted by B. W.

You could use lines for a 71 or 72 with factory disc brakes, should drop right in. I'm not sure if the front brake hoses are in the same location on the frame so that may require some mods.

I purchased a complete set of lines from Inline tube, the front lines were the only ones that fit properly. (FWIW)

Did you order the 2wd front set I did not see one for a 3/4 4wd
Thanks

[Doug's68SS]

Get on the phone and give them a call, they seem to have all the lines you would ever need.

[B. W.]

I ordered P/N CTB7144 (fitment for 71 3/4 ton, power disc brakes, 4x4, long bed)

[Mts67C10K20]

BW
Thank you for your assistance an information
Since Inline and the other vendors of brake lines that i called
do not offer a set for a 67 K20 and are reluctant to suggest a different set not specific
To an application
Your help was exactly what was needed
Everyone I've delt with on this board rocks

68ss thanks for the Texas insight

[B. W.]

Your welcome. Your right, great members & great moderators here! Keep us posted with pics please.

[Mts67C10K20]

I have all the parts collected including new brake lines
So here we go
A few picks from beginning to now in process