C20 New to Me - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vespaholic · 01-20-2018, 08:50 PM

Well I started out looking for a '67-'72 then I stumbled across this listed in the "Trucks For Sale" section of this forum.

1979 C20 Longbed
454 / Auto
Mostly Original Paint
Runs and Drives nice.
Needs a couple of odds and ends but nothing too drastic.

Interestingly enough, I had this same color combo (in and out) on my 1979 Blazer.

I'd like to find out the history of this truck.
I bought it from a forum member in WV who bought it from another forum member in OR.
Unfortunately he does not remember the guy's name.

Does anyone know the prior owner of this truck?
Thanks

**mongocanfly** · 01-20-2018, 10:02 PM

don't know em.... but you got a nice truck...

**Joesjunk** · 01-20-2018, 10:45 PM

Have you got the truck yet? It is a good looking truck

vespaholic · 01-21-2018, 12:18 AM

@mongocanfly: Thanks

@Joesjunk: Yes, this morning.Thanks

vespaholic · 02-03-2018, 06:20 PM

I've been doing some work to my new acquisition.
I'm also still looking for the prior owner in OR.
First I wanted to tidy up under the hood a little.
I got rid of the chrome air cleaner and breather cap and put back the original air cleaner.
The engine now vents through the air cleaner.
(I took the before pictures after I already installed the heat riser tube.)
I stumbled across a factory fresh air intake tube on Craigslist for $10, so I put that on.
I also removed the unnecessary and ugly heat shielding from the fuel lines.
Unfortunately, I need to leave the fuel regulator because the PO put on an Edelbrock carb and it does not like too much fuel.
I'll find something less conspicuous later.
Here are before and after pictures.

vespaholic · 02-03-2018, 06:34 PM

I also added a semi-old school snap tonneau cover.
The snaps are on a rail that clamps to the bed so no drilling.
I then gave the truck back its original "Camper Mirrors"; fitting as it is a Camper Special.
I threw in a 1/2" thick rubber bed mat.
Lastly, the truck came with 2 brand new tires on the front and 2 really bad ones on the rear.
I bought and installed the exact same new tires for the rear.
Here are some pics:

**IllinoisK30** · 02-03-2018, 08:05 PM

Truck and engine compartment look great! Nice attention to detail.

GM72K10 · 02-03-2018, 10:38 PM

Nice

Wwes · 02-03-2018, 11:13 PM

Looks great, I don't like that Chrome air cleaner either. Glad you fixed it back to stock.

Are you going to get rid of that edelbrock, the FPR, and get back to a quadrajet with stock fuel lines. That will make it look even better.

Nice work and looking forward to the updates.

**Joesjunk** · 02-03-2018, 11:33 PM

The truck looks great, I like the camper mirrors too

vespaholic · 02-04-2018, 12:26 AM

Thanks guys.
I really dig the stock look on all my cars/trucks.

@Wwes: I'm not sure what I'm going to do about the carb at this point.
While not factory, it really runs great.
But, I know that not having the original will most likely drive me nuts.

I'm looking forward to spring and warm weather so I can detail the engine compartment.

@Joesjunk: The camper mirrors were a lucky find. $25 each at a junk yard.

I also got a spare tire holder and spare rim/tire which I will be working on this week (time permitting).

I'm also waiting on a rebuilt factory AM/FM radio with a hidden AUX plug under the dash.

Stay Tuned....................

GM72K10 · 02-04-2018, 07:56 AM

and would that rim have come from beautiful down town Line Lexington by chance?

Katrina/10 · 02-04-2018, 09:05 AM

Nice work and a nice truck.

vespaholic · 02-04-2018, 09:08 AM

@GM72K10: Yes, it did!
Thanks Gerry!

GM72K10 · 02-04-2018, 09:17 AM

Quote:

Originally Posted by vespaholic

@GM72K10: Yes, it did!
Thanks Gerry!

Cool, nice truck!

vespaholic · 02-04-2018, 02:04 PM

Trial fit the spare under the truck this morning.
I mounted the tire on the wheel by hand but did not put air in it yet as I have no valve, so it's a little loose and too close to the exhaust.
I just wanted to make sure it fit with the after market hitch.
It does, perfectly.

vespaholic · 02-09-2018, 04:07 PM

I had a little time today so I installed my newly acquired jack and associated stuff.
Fortunately, the patina matched my trucks patina.
Looks like it's been there all along.
Before & After Shots are below.
I also put a valve in the spare, inflated it and mounted it again.

**Joesjunk** · 02-09-2018, 04:09 PM

Glad that truck is working out for you. I like it

vespaholic · 02-09-2018, 04:10 PM

Thanks Joe.
I am having fun with it.
Plus, it's very useful when I need it.

vespaholic · 02-13-2018, 12:06 AM

I finished installing my "new" radio tonight.
I was lucky and found the 3 factory wires neatly cut and taped off behind the dash.
This will hopefully be my only one of two deviations from the way this truck came from the factory.
This truck originally came with an AM radio with a single speaker in the dash.
I installed a refurbished AM/FM factory radio.
I put two 3.5" speakers in the original dash 4"x10" speaker hole and 2 small box speaker behind the seat.
The box speakers fit perfectly in the rear cardboard tray with no drilling or screws.
The guy who refurbished the radio also installed an 1/4" AUX plug for connecting my phone, MP3 or whatever.
I ran that to the glove compartment.
He also provided all 3 factory connectors and an original bracket so everything is done right.
If anyone in interested in a rebuilt radio the guy that did mine is a great resource.
His name is Frank and I found him on eBay; his user name is "arctic63".
Sounds great!

vespaholic · 02-13-2018, 09:06 AM

I also swapped out the ugly plastic wipers for something more correct.

**jocko** · 02-13-2018, 10:35 AM

Hey! Nice tuck! Love this paint combo on squares. Like how you’re getting all the odds and ends to make it look even more original. Looks great.

**Palf70Step** · 02-13-2018, 10:52 AM

Nice looking truck and really like that color combo

**Joesjunk** · 02-13-2018, 11:56 AM

I love the attention to detail

tucsonjwt · 02-13-2018, 04:50 PM

Not sure, but I think that is a 1/2 ton jack. I have the same one for my 83 C20 since my C20 jack froze up. I think it will lift your truck fine but if you have it loaded to max cap then maybe not. I carry a bottle jack behind the seat anyway.

01-20-2018, 08:50 PM	#1
vespaholic Registered User Join Date: Jan 2018 Location: Radnor, PA Posts: 109	C20 New to Me Well I started out looking for a '67-'72 then I stumbled across this listed in the "Trucks For Sale" section of this forum. 1979 C20 Longbed 454 / Auto Mostly Original Paint Runs and Drives nice. Needs a couple of odds and ends but nothing too drastic. Interestingly enough, I had this same color combo (in and out) on my 1979 Blazer. I'd like to find out the history of this truck. I bought it from a forum member in WV who bought it from another forum member in OR. Unfortunately he does not remember the guy's name. Does anyone know the prior owner of this truck? Thanks Attached Images

01-20-2018, 10:02 PM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,578	Re: C20 New to Me don't know em.... but you got a nice truck... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

01-20-2018, 10:45 PM	#3
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Re: C20 New to Me Have you got the truck yet? It is a good looking truck __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

01-21-2018, 12:18 AM	#4
vespaholic Registered User Join Date: Jan 2018 Location: Radnor, PA Posts: 109	Re: C20 New to Me @mongocanfly: Thanks @Joesjunk: Yes, this morning.Thanks

02-03-2018, 06:20 PM	#5
vespaholic Registered User Join Date: Jan 2018 Location: Radnor, PA Posts: 109	Re: C20 New to Me I've been doing some work to my new acquisition. I'm also still looking for the prior owner in OR. First I wanted to tidy up under the hood a little. I got rid of the chrome air cleaner and breather cap and put back the original air cleaner. The engine now vents through the air cleaner. (I took the before pictures after I already installed the heat riser tube.) I stumbled across a factory fresh air intake tube on Craigslist for $10, so I put that on. I also removed the unnecessary and ugly heat shielding from the fuel lines. Unfortunately, I need to leave the fuel regulator because the PO put on an Edelbrock carb and it does not like too much fuel. I'll find something less conspicuous later. Here are before and after pictures. Attached Images Last edited by vespaholic; 02-03-2018 at 06:45 PM.

02-03-2018, 06:34 PM	#6
vespaholic Registered User Join Date: Jan 2018 Location: Radnor, PA Posts: 109	Re: C20 New to Me I also added a semi-old school snap tonneau cover. The snaps are on a rail that clamps to the bed so no drilling. I then gave the truck back its original "Camper Mirrors"; fitting as it is a Camper Special. I threw in a 1/2" thick rubber bed mat. Lastly, the truck came with 2 brand new tires on the front and 2 really bad ones on the rear. I bought and installed the exact same new tires for the rear. Here are some pics: Attached Images Last edited by vespaholic; 02-03-2018 at 06:46 PM.

02-03-2018, 08:05 PM	#7
IllinoisK30 Active Member Join Date: Oct 2017 Location: Northern Illinois Posts: 168	Re: C20 New to Me Truck and engine compartment look great! Nice attention to detail.

02-03-2018, 10:38 PM	#8
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,477	Re: C20 New to Me Nice __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck

02-03-2018, 11:13 PM	#9
Wwes Registered User Join Date: Apr 2017 Location: FL Posts: 144	Re: C20 New to Me Looks great, I don't like that Chrome air cleaner either. Glad you fixed it back to stock. Are you going to get rid of that edelbrock, the FPR, and get back to a quadrajet with stock fuel lines. That will make it look even better. Nice work and looking forward to the updates.

02-03-2018, 11:33 PM	#10
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Re: C20 New to Me The truck looks great, I like the camper mirrors too __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

02-04-2018, 12:26 AM	#11
vespaholic Registered User Join Date: Jan 2018 Location: Radnor, PA Posts: 109	Re: C20 New to Me Thanks guys. I really dig the stock look on all my cars/trucks. @Wwes: I'm not sure what I'm going to do about the carb at this point. While not factory, it really runs great. But, I know that not having the original will most likely drive me nuts. I'm looking forward to spring and warm weather so I can detail the engine compartment. @Joesjunk: The camper mirrors were a lucky find. $25 each at a junk yard. I also got a spare tire holder and spare rim/tire which I will be working on this week (time permitting). I'm also waiting on a rebuilt factory AM/FM radio with a hidden AUX plug under the dash. Stay Tuned....................

02-04-2018, 07:56 AM	#12
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,477	Re: C20 New to Me and would that rim have come from beautiful down town Line Lexington by chance? __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck

02-04-2018, 09:05 AM	#13
Katrina/10 Registered User Join Date: Oct 2010 Location: Ocean Springs, MS Posts: 1,746	Re: C20 New to Me Nice work and a nice truck. __________________ Gary 1971 Chevrolet C/10 1951 GMC 100 1977 GMC C15 1955 Chevrolet 3100

02-04-2018, 09:08 AM	#14
vespaholic Registered User Join Date: Jan 2018 Location: Radnor, PA Posts: 109	Re: C20 New to Me @GM72K10: Yes, it did! Thanks Gerry!

02-04-2018, 02:04 PM	#16
vespaholic Registered User Join Date: Jan 2018 Location: Radnor, PA Posts: 109	Re: C20 New to Me Trial fit the spare under the truck this morning. I mounted the tire on the wheel by hand but did not put air in it yet as I have no valve, so it's a little loose and too close to the exhaust. I just wanted to make sure it fit with the after market hitch. It does, perfectly. Attached Images Last edited by vespaholic; 02-04-2018 at 03:30 PM.



Register or Log In To remove these advertisements.

02-09-2018, 04:07 PM	#17
vespaholic Registered User Join Date: Jan 2018 Location: Radnor, PA Posts: 109	Re: C20 New to Me I had a little time today so I installed my newly acquired jack and associated stuff. Fortunately, the patina matched my trucks patina. Looks like it's been there all along. Before & After Shots are below. I also put a valve in the spare, inflated it and mounted it again. Attached Images

02-09-2018, 04:09 PM	#18
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Re: C20 New to Me Glad that truck is working out for you. I like it __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

02-09-2018, 04:10 PM	#19
vespaholic Registered User Join Date: Jan 2018 Location: Radnor, PA Posts: 109	Re: C20 New to Me Thanks Joe. I am having fun with it. Plus, it's very useful when I need it.

02-13-2018, 12:06 AM	#20
vespaholic Registered User Join Date: Jan 2018 Location: Radnor, PA Posts: 109	Re: C20 New to Me I finished installing my "new" radio tonight. I was lucky and found the 3 factory wires neatly cut and taped off behind the dash. This will hopefully be my only one of two deviations from the way this truck came from the factory. This truck originally came with an AM radio with a single speaker in the dash. I installed a refurbished AM/FM factory radio. I put two 3.5" speakers in the original dash 4"x10" speaker hole and 2 small box speaker behind the seat. The box speakers fit perfectly in the rear cardboard tray with no drilling or screws. The guy who refurbished the radio also installed an 1/4" AUX plug for connecting my phone, MP3 or whatever. I ran that to the glove compartment. He also provided all 3 factory connectors and an original bracket so everything is done right. If anyone in interested in a rebuilt radio the guy that did mine is a great resource. His name is Frank and I found him on eBay; his user name is "arctic63". Sounds great! Attached Images Last edited by vespaholic; 02-13-2018 at 12:13 AM.

02-13-2018, 09:06 AM	#21
vespaholic Registered User Join Date: Jan 2018 Location: Radnor, PA Posts: 109	Re: C20 New to Me I also swapped out the ugly plastic wipers for something more correct. Attached Images

02-13-2018, 10:35 AM	#22
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,930	Re: C20 New to Me Hey! Nice tuck! Love this paint combo on squares. Like how you’re getting all the odds and ends to make it look even more original. Looks great.

02-13-2018, 10:52 AM	#23
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,586	Re: C20 New to Me Nice looking truck and really like that color combo __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

02-13-2018, 11:56 AM	#24
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Re: C20 New to Me I love the attention to detail __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

02-13-2018, 04:50 PM	#25
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,188	Re: C20 New to Me Not sure, but I think that is a 1/2 ton jack. I have the same one for my 83 C20 since my C20 jack froze up. I think it will lift your truck fine but if you have it loaded to max cap then maybe not. I carry a bottle jack behind the seat anyway.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.