02-16-2018, 06:57 PM | #1 |
Registered User
Join Date: Jun 2002
Location: new market, alabama
Posts: 1,330
|
Help--turn signals
1968 chevy== all my lites,brakes,turn signals were working.i put l.e.ds. In them all and now the turn signals dont work. It was two new flashers to use with the kit i replace the one in the fuse box.where does the other one go ? Thanks,buddy
|
02-17-2018, 09:43 AM | #2 |
Registered User
Join Date: Apr 2017
Location: Norfolk,Va.
Posts: 31
|
Re: Help--turn signals
I know nothing about a 68 electrical system,do you have emergency flashers in your 68? If so that is where the second one goes. Do you have a wiring diagram of your truck if so look at that or see if one is available on this site. Just some thoughts.
|
02-17-2018, 11:32 AM | #3 |
Registered User
Join Date: Feb 2014
Location: Sunnyvale, CA
Posts: 605
|
Re: Help--turn signals
swap the wires on the turn signal flasher and try that. Had the same issue on my build with new harness though. also other flasher could be 4 ways, depending on how wired.
__________________
1950 3100 5 window |
02-19-2018, 01:54 PM | #4 |
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,190
|
Re: Help--turn signals
Put a jumper wire in the 2 terms were the flasher plugs in. The turn signals should work this way except not flash. Make sure both flashers are plugged in at the fuse panel. You may just have the 4 way plugged in.
George |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|