Rack and Pinion Steering - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NPilot1975 · 08-27-2002, 06:25 AM

I have a 1972 Chevy chassis that I want to add a power rack and pinion set-up to. Does any one know of a cheap way of doing this or a company that produces a kit? Any help would be greatly appreciated.

MarineNav · 08-29-2002, 05:04 PM

I was wondering the same thing. I looked at Flaming River but nothing for us. I've been doing some research and it seems the Ford Thunderbird setup is better than the MustangII. I haven't seen anything about any chevy setups though.

NPilot1975 · 08-29-2002, 11:36 PM

Just for your information, Jim Meyer Racing (www.jimmeyerracing.com) offers a complete front crossmember with rack and pinion steering and disk brakes. It has options like Shock Wave air suspension. I am overseas with the Navy and have not received any replies from e-mails I have sent the company on price and options. Looking at other crossmembers they offer I am guessing it is about $2400-$2500. I think that is out of my price range but they may be able to sell a kit just for the steering. If you find anything gives me a reply and I will do the same.

73GMC · 09-08-2002, 01:48 PM

Hello,

Fat man Fabrications on the east coast has bolt in kits for swapping crossmember and steering/suspension.

www.fatmanfab.com

Good luck!!

jiggs · 09-11-2002, 02:35 PM

Keep in mind tie rod length when you are looking at racks. If the tie rod on the rack is longer of shorter you are going to have some terrible bumpsteer.

DarkFox1 · 09-11-2002, 07:00 PM

I thought about doing tihs.. although my suspension is already setup and ready for a steering gear.. yall think rack and pinion is really nessecary? my f*** has rack and pinion and it has to be one of the things I like the most about its steering.

NPilot1975 · 09-15-2002, 10:30 AM

I am trying to contact Fatman Fabrications with some questions on their bolt in front crossmember for my '72 chassis. Does anyone happen to know an e-mail address for them? I am overseas and cannot use the phone number that is supplied on the website. Any help would be greatly appreciated. Thank You.

73GMC · 09-15-2002, 03:12 PM

aha, overseas, eh? well, I didn't see an email for them unfortunately. This is their info.

Fat Man Fabrications
8621-C Fairview Road, HWY. 218
Charlotte, North Carolina 28227
Phone: 704-545-0369 (Eastern Standard Time)
7am - 6 pm Mon- Thur...7am - 12am Fri

www.fatmanfab.com

After double-checking the site, I guess they haven't setup the email side yet.

08-27-2002, 06:25 AM	#1
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Rack and Pinion Steering I have a 1972 Chevy chassis that I want to add a power rack and pinion set-up to. Does any one know of a cheap way of doing this or a company that produces a kit? Any help would be greatly appreciated.

08-29-2002, 05:04 PM	#2
MarineNav Official Beaver Inspector Join Date: Sep 2001 Location: MCAS Cherry Point, NC Posts: 119	I was wondering the same thing. I looked at Flaming River but nothing for us. I've been doing some research and it seems the Ford Thunderbird setup is better than the MustangII. I haven't seen anything about any chevy setups though. __________________ 70' C-10SWB beater with a heater, one day haulin a$$ with class

09-08-2002, 01:48 PM	#4
73GMC Proud American Join Date: Sep 2002 Location: Great State of Texas, USA Posts: 97	Bolt In Kit Hello, Fat man Fabrications on the east coast has bolt in kits for swapping crossmember and steering/suspension. www.fatmanfab.com Good luck!!

09-11-2002, 02:35 PM	#5
jiggs poker face Join Date: Jul 2002 Location: Saskatoon, Saskatchewan Posts: 218	Keep in mind tie rod length when you are looking at racks. If the tie rod on the rack is longer of shorter you are going to have some terrible bumpsteer. __________________ If you could kick the person in the *ss responsible for most of your trouble, you wouldn't sit for a month.

09-15-2002, 10:30 AM	#7
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Help with E-mail I am trying to contact Fatman Fabrications with some questions on their bolt in front crossmember for my '72 chassis. Does anyone happen to know an e-mail address for them? I am overseas and cannot use the phone number that is supplied on the website. Any help would be greatly appreciated. Thank You.

08-29-2002, 11:36 PM	#3
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Just for your information, Jim Meyer Racing (www.jimmeyerracing.com) offers a complete front crossmember with rack and pinion steering and disk brakes. It has options like Shock Wave air suspension. I am overseas with the Navy and have not received any replies from e-mails I have sent the company on price and options. Looking at other crossmembers they offer I am guessing it is about $2400-$2500. I think that is out of my price range but they may be able to sell a kit just for the steering. If you find anything gives me a reply and I will do the same.

09-11-2002, 07:00 PM	#6
DarkFox1 in WAY over my head Join Date: Sep 2001 Location: Douglasville GA Posts: 923	I thought about doing tihs.. although my suspension is already setup and ready for a steering gear.. yall think rack and pinion is really nessecary? my f*** has rack and pinion and it has to be one of the things I like the most about its steering.

09-15-2002, 03:12 PM	#8
73GMC Proud American Join Date: Sep 2002 Location: Great State of Texas, USA Posts: 97	fat man fab aha, overseas, eh? well, I didn't see an email for them unfortunately. This is their info. Fat Man Fabrications 8621-C Fairview Road, HWY. 218 Charlotte, North Carolina 28227 Phone: 704-545-0369 (Eastern Standard Time) 7am - 6 pm Mon- Thur...7am - 12am Fri www.fatmanfab.com After double-checking the site, I guess they haven't setup the email side yet.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.