Headers for a 572... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PowerdbyChevy79** · 09-29-2015, 09:50 PM

Whats up guys...im in need of some advice/help...im looking for some headers for this 572 on a 70 c/10..frame is boxed in so i know that poses an issue.....looking for something i can bolt on..any help is much appreciated..

*Fitz* · 09-29-2015, 10:25 PM

Quote:

Originally Posted by PowerdbyChevy79

Whats up guys...im in need of some advice/help...im looking for some headers for this 572 on a 70 c/10..frame is boxed in so i know that poses an issue.....looking for something i can bolt on..any help is much appreciated..

SANDERSONS! A boxed frame makes no never mind and they are LONG TUBE HEADERS!

**PowerdbyChevy79** · 09-29-2015, 11:44 PM

Quote:

Originally Posted by Fitz

SANDERSONS! A boxed frame makes no never mind and they are LONG TUBE HEADERS!

Do you have a part #

*Fitz* · 09-30-2015, 11:36 AM

Quote:

Originally Posted by PowerdbyChevy79

Do you have a part #

When I bought mine in 2006 they were BB4's but they have changed the part number to C6. The website says they fit the 502 but the 502 and 572 share the same exhaust port spacing and shape so the 502 headers will fit. Good idea to call first, though. You will need to relocate your oil filter. Once the headers are on there is no way to remove it to change the filter without removing the drivers side header. Since I mounted a Derale remote oil cooler on the drivers side of the core support the filter is just back from there.

rharp · 09-30-2015, 11:43 AM

I'll trade you your 572 for my 350 with a pair of headers. Problem solved!

*Fitz* · 09-30-2015, 12:25 PM

Quote:

Originally Posted by rharp

I'll trade you your 572 for my 350 with a pair of headers. Problem solved!

Hold your breath while you wait for it to arrive, Dude!

68Gold/white · 09-30-2015, 02:39 PM

Is a 572 a tall deck engine???
Just wondering, a 502 is a standard deck engine.
Hooker used to make 2-1/8" primary tube headers for these pickups.

68is4me · 09-30-2015, 02:58 PM

I am running the sanders bb8, not sure how they would work on the 572 but should be close to the same fitment.

Twisted78SS · 09-30-2015, 03:01 PM

You can go for the big ticket one's very nice and designed around our trucks.

long thread here with info

http://67-72chevytrucks.com/vboard/s...d.php?t=314836

67 chevelle · 09-30-2015, 03:22 PM

572 is a tall deck
502 is standard

*Fitz* · 09-30-2015, 08:56 PM

Quote:

Originally Posted by 68Gold/white

Is a 572 a tall deck engine???
Just wondering, a 502 is a standard deck engine.
Hooker used to make 2-1/8" primary tube headers for these pickups.

Deck height for the 502 is 9.8 inches. The 572 is 10.2 inches. They share the same cylinder head design so the only fitment issur for headers is clearance with the frame. Sanderson long tubes fit the 572 on big block frame stands and clear the frame with no problems.

**PowerdbyChevy79** · 10-01-2015, 12:40 PM

Quote:

Originally Posted by Fitz

Deck height for the 502 is 9.8 inches. The 572 is 10.2 inches. They share the same cylinder head design so the only fitment issur for headers is clearance with the frame. Sanderson long tubes fit the 572 on big block frame stands and clear the frame with no problems.

What pulley kit are you using...

*Fitz* · 10-01-2015, 06:31 PM

Quote:

Originally Posted by PowerdbyChevy79

What pulley kit are you using...

GM PN 19172805 Serpentine accessory drive. When you get it on the street let me know what you think. Mine is a heart attack with 335 M&H's on the rear!! You'll have noise and smoke coming out of everywhere.

09-29-2015, 09:50 PM	#1
PowerdbyChevy79 Senior Member Join Date: Apr 2013 Location: Houston,Tx Posts: 738	Headers for a 572... Whats up guys...im in need of some advice/help...im looking for some headers for this 572 on a 70 c/10..frame is boxed in so i know that poses an issue.....looking for something i can bolt on..any help is much appreciated.. Attached Images __________________ 1966 C10 "Mary" 1972 C10 Cheyenne "Betty" https://67-72chevytrucks.com/vboard/...d.php?t=847364 1976 C35 Sierra Grande "Mr. Harvey" 1979 C10 Silverado "The BIG TEN" https://67-72chevytrucks.com/vboard/...d.php?t=841339 1982 C10 Silverado "Lucy" C10 Club Texas -HMIC

09-30-2015, 11:43 AM	#5
rharp Registered User Join Date: Mar 2015 Location: Wichita, KS Posts: 106	Re: Headers for a 572... I'll trade you your 572 for my 350 with a pair of headers. Problem solved! __________________ 1969 Chevy CST/10 396, PS, PB, A/C

09-30-2015, 02:39 PM	#7
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,285	Re: Headers for a 572... Is a 572 a tall deck engine??? Just wondering, a 502 is a standard deck engine. Hooker used to make 2-1/8" primary tube headers for these pickups.

09-30-2015, 02:58 PM	#8
68is4me Registered User Join Date: Jun 2014 Location: lakefield,mn Posts: 566	Re: Headers for a 572... I am running the sanders bb8, not sure how they would work on the 572 but should be close to the same fitment. Attached Images __________________ 68 c10 swb stepper 68 c10 swb stepper 67 c10 lwb 06 gmc duramax

09-30-2015, 03:01 PM	#9
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Headers for a 572... You can go for the big ticket one's very nice and designed around our trucks. long thread here with info http://67-72chevytrucks.com/vboard/s...d.php?t=314836 __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

09-30-2015, 03:22 PM	#10
67 chevelle Registered User Join Date: May 2013 Location: WEST PALM FLORIDA Posts: 1,174	Re: Headers for a 572... 572 is a tall deck 502 is standard __________________ 68 Long Fleet , ly6 , turbo 350 , 3-5 drop , original paint , front discs 67 Small window , 7 foot bed , tweaked 6.0 LSX 2004R Medium Olive 58 Apache fleet , 235 , offy intake , dual exhaust , 4 on the floor , red/white 69 Long Fleet , Custom , 6.0, 4l60 , AC , Medium Olive



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.