MO Parting 71 C30 dually - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 04-15-2018, 07:34 PM

TRUCK IS GONE,,,, THANKS.... Finally getting around to this one. The Pate Swap Meet is next week in Dallas and I would like to have some more operating capital and have this one out of here before we leave. All prices are shipped, and we CANNOT-WILL NOT ship larger parts. First, the set of single groove water pump pulley and single groove crankshaft pulley, matched set of pulleys. $20.00 SOLD shipped for the set. Used, oem HEI distributor, $35.00 shipped. Passenger outer door handle, driver/shop truck quality, $15.00 shipped. What do you need, I am willing to work with you if at all possible. Thanks, Fred.

1auctiondad · 04-15-2018, 07:49 PM

How much for the clutch arm that goes through the firewall?

**Cash3481** · 04-15-2018, 09:23 PM

Fred,
I’ll take the kickdown cable/throttle holder/carb mount shipped to 67110. Let me know the total please and I’ll get you paid.

**Cash3481** · 04-15-2018, 09:27 PM

Fred,
I guess the pedal and throttle cable as well.

**med.bronze** · 04-15-2018, 09:30 PM

Hey Fred, interested in the mirrors and the exhaust manifolds. Shipping is 59044. Thanks- Ryan

**Curtb1971** · 04-15-2018, 09:51 PM

Hey Fred, I'm in for the cab clearance light harness and pads. Also the shifter boot and hardware. Thanks, Curt

**cst204x4** · 04-15-2018, 10:01 PM

price on heater blower motor and screws shipped to 48817

**Longhorn 69** · 04-16-2018, 08:19 AM

Fred, If it has a 2 piece drive shaft, I am looking for the frame cross member that supports the carrier bearing under the back of the cab. I would like some good pictures, how much shipped to 61061? Thanks

NJKelly · 04-16-2018, 10:54 AM

My 71 Blazer needs hardware to hold stick shift in place. It's a 4 speed. Not sure what part names are, or if yours would be compatible. If you need more info from me to determine please let me know, thanks.

**jaybatta** · 04-16-2018, 11:15 AM

2nd in line on cab clearance light harness

Joe

**specialtyretail** · 04-16-2018, 07:53 PM

Quote:

Originally Posted by 1auctiondad

How much for the clutch arm that goes through the firewall?

I am wanting to keep the clutch stuff intact as a set. Thanks, Fred.

**specialtyretail** · 04-16-2018, 07:55 PM

Quote:

Originally Posted by Cash3481

Fred,
I’ll take the kickdown cable/throttle holder/carb mount shipped to 67110. Let me know the total please and I’ll get you paid.

Hey Mike. I just got in from work. Let me get everything pulled and we will go from there. Thanks, Fred.

**specialtyretail** · 04-16-2018, 08:06 PM

Quote:

Originally Posted by med.bronze

Hey Fred, interested in the mirrors and the exhaust manifolds. Shipping is 59044. Thanks- Ryan

Hey Ryan. Let me see if I can get them pulled Tuesday evening. Thanks, Fred.

**Cash3481** · 04-16-2018, 08:06 PM

Quote:

Originally Posted by specialtyretail

Hey Mike. I just got in from work. Let me get everything pulled and we will go from there. Thanks, Fred.

No rush... just get it off when you can and shoot me a total and I’ll get you paid.

**med.bronze** · 04-16-2018, 08:16 PM

Quote:

Originally Posted by specialtyretail

Hey Ryan. Let me see if I can get them pulled Tuesday evening. Thanks, Fred.

Sounds good Fred, thanks!

**specialtyretail** · 04-17-2018, 07:47 PM

Quote:

Originally Posted by Cash3481

Fred,
I guess the pedal and throttle cable as well.

SOLD,,,, THANKS.... Hey Mike, finally got them pulled. How about $48.00 shipped for all of it. Thanks, Fred.

**specialtyretail** · 04-17-2018, 07:48 PM

Quote:

Originally Posted by med.bronze

Hey Fred, interested in the mirrors and the exhaust manifolds. Shipping is 59044. Thanks- Ryan

SOLD,,,, THANKS.... Hey Ryan. Got them pulled, will get you some pics in the morning. Manifolds are heavy, be expensive to ship. Thanks, Fred.

**med.bronze** · 04-17-2018, 08:02 PM

If it helps on the shipping for the exhaust manifolds I’m actually only needing the passenger side. Mirrors look good, I’ll definitely take those. Thanks-Ryan

**specialtyretail** · 04-18-2018, 08:41 AM

Quote:

Originally Posted by Longhorn 69

Fred, If it has a 2 piece drive shaft, I am looking for the frame cross member that supports the carrier bearing under the back of the cab. I would like some good pictures, how much shipped to 61061? Thanks

I can get you all kinds of pics, but cannot ship it. Thanks, Fred.

**specialtyretail** · 04-18-2018, 08:43 AM

Quote:

Originally Posted by cst204x4

price on heater blower motor and screws shipped to 48817

$20.00 shipped. Thanks, Fred.

**specialtyretail** · 04-18-2018, 08:45 AM

Quote:

Originally Posted by Curtb1971

Hey Fred, I'm in for the cab clearance light harness and pads. Also the shifter boot and hardware. Thanks, Curt

Curt,, the wiring has deteriorated to rust. Let me see if the boot and ring will come of without destroying it. Thanks, Fred.

**zicc1835** · 04-18-2018, 08:56 AM

Fred if you take this apart ill take these end of column btween the intermediate thanks
Jess

**Longhorn 69** · 04-18-2018, 09:05 AM

Thanks, If it was the right size and in good shape I wouldn't mind the drive as I have good friends in St. Louis area. Can I PM you.

**specialtyretail** · 04-18-2018, 09:48 AM

Quote:

Originally Posted by Longhorn 69

Thanks, If it was the right size and in good shape I wouldn't mind the drive as I have good friends in St. Louis area. Can I PM you.

Of course you can,,, Thanks, Fred.

**specialtyretail** · 04-18-2018, 09:49 AM

Quote:

Originally Posted by zicc1835

Fred if you take this apart ill take these end of column btween the intermediate thanks
Jess

I already have one of those removed and bagged up. $10.00 shipped if you need it. Thanks, Fred.

04-15-2018, 07:34 PM	#1
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Parting 71 C30 dually TRUCK IS GONE,,,, THANKS.... Finally getting around to this one. The Pate Swap Meet is next week in Dallas and I would like to have some more operating capital and have this one out of here before we leave. All prices are shipped, and we CANNOT-WILL NOT ship larger parts. First, the set of single groove water pump pulley and single groove crankshaft pulley, matched set of pulleys. $20.00 SOLD shipped for the set. Used, oem HEI distributor, $35.00 shipped. Passenger outer door handle, driver/shop truck quality, $15.00 shipped. What do you need, I am willing to work with you if at all possible. Thanks, Fred. Attached Images __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks. Last edited by specialtyretail; 05-20-2018 at 02:56 PM.

04-15-2018, 07:49 PM	#2
1auctiondad Registered User Join Date: Jun 2016 Location: Liberty, Missouri Posts: 107	Re: Parting 71 C30 dually How much for the clutch arm that goes through the firewall?

04-15-2018, 09:23 PM	#3
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting 71 C30 dually Fred, I’ll take the kickdown cable/throttle holder/carb mount shipped to 67110. Let me know the total please and I’ll get you paid. __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

04-15-2018, 09:27 PM	#4
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting 71 C30 dually Fred, I guess the pedal and throttle cable as well. __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

04-15-2018, 09:30 PM	#5
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: Parting 71 C30 dually Hey Fred, interested in the mirrors and the exhaust manifolds. Shipping is 59044. Thanks- Ryan __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

04-15-2018, 09:51 PM	#6
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,007	Re: Parting 71 C30 dually Hey Fred, I'm in for the cab clearance light harness and pads. Also the shifter boot and hardware. Thanks, Curt __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com

04-15-2018, 10:01 PM	#7
cst204x4 Registered User Join Date: Jan 2012 Location: corunna michigan Posts: 1,999	Re: Parting 71 C30 dually price on heater blower motor and screws shipped to 48817 __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles

04-16-2018, 08:19 AM	#8
Longhorn 69 Junior Member Join Date: Oct 2017 Location: Oregon, Ill. Posts: 62	Re: Parting 71 C30 dually Fred, If it has a 2 piece drive shaft, I am looking for the frame cross member that supports the carrier bearing under the back of the cab. I would like some good pictures, how much shipped to 61061? Thanks __________________ Greg 69 Longhorn 396, 4 Speed SM 465, PS, PB, No Air

04-16-2018, 10:54 AM	#9
NJKelly Registered User Join Date: Mar 2018 Location: New Jersey Posts: 377	Re: Parting 71 C30 dually My 71 Blazer needs hardware to hold stick shift in place. It's a 4 speed. Not sure what part names are, or if yours would be compatible. If you need more info from me to determine please let me know, thanks.

04-16-2018, 11:15 AM	#10
jaybatta Senior Member Join Date: Apr 2014 Location: Livingston, MT Posts: 835	Re: Parting 71 C30 dually 2nd in line on cab clearance light harness Joe __________________ Joe 1968 K20 1970 K20 Semper Fi

04-17-2018, 08:02 PM	#18
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: Parting 71 C30 dually If it helps on the shipping for the exhaust manifolds I’m actually only needing the passenger side. Mirrors look good, I’ll definitely take those. Thanks-Ryan __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

04-18-2018, 08:56 AM	#22
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,111	Re: Parting 71 C30 dually Fred if you take this apart ill take these end of column btween the intermediate thanks Jess Attached Images __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

04-18-2018, 09:05 AM	#23
Longhorn 69 Junior Member Join Date: Oct 2017 Location: Oregon, Ill. Posts: 62	Re: Parting 71 C30 dually Thanks, If it was the right size and in good shape I wouldn't mind the drive as I have good friends in St. Louis area. Can I PM you. __________________ Greg 69 Longhorn 396, 4 Speed SM 465, PS, PB, No Air



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.