MO Parting 71 C30 dually - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**cst204x4** · 04-18-2018, 11:13 AM

Sounds good I’ll take blower motor and hardware sending paypal

BAWAlex · 04-18-2018, 11:37 AM

I will take the set of single groove water pump pulley and single groove crankshaft pulley, matched set of pulleys. $20.00 shipped for the set. Paypal on the way and sending PM with address. Thanks!!

**zicc1835** · 04-18-2018, 12:14 PM

Quote:

Originally Posted by specialtyretail

I already have one of those removed and bagged up. $10.00 shipped if you need it. Thanks, Fred.

i should have known

thanks PP on its way

**specialtyretail** · 04-18-2018, 01:11 PM

Quote:

Originally Posted by cst204x4

Sounds good I’ll take blower motor and hardware sending patpal

I will get it pulled and ready to go. Thanks, Fred.

**specialtyretail** · 04-18-2018, 02:36 PM

Quote:

Originally Posted by BAWAlex

I will take the set of single groove water pump pulley and single groove crankshaft pulley, matched set of pulleys. $20.00 shipped for the set. Paypal on the way and sending PM with address. Thanks!!

I will get them ready to go. Thanks, Fred.

**jaybatta** · 04-18-2018, 02:41 PM

Quote:

Originally Posted by specialtyretail

Curt,, the wiring has deteriorated to rust. Let me see if the boot and ring will come of without destroying it. Thanks, Fred.

Hey Fred, if Curt is going to pass on cab clearance light wiring, I might be interested. I'm looking to get an original harness to make a pattern from. Is there enough there to do that?

Thanks

Joe

**specialtyretail** · 04-18-2018, 03:27 PM

Quote:

Originally Posted by zicc1835

i should have known

thanks PP on its way

I should be able to ship them Thursday. Thanks, Fred.

**zicc1835** · 04-18-2018, 09:03 PM

Quote:

Originally Posted by zicc1835

i should have known

thanks PP on its way

sent ....thanks

**Curtb1971** · 04-18-2018, 09:29 PM

Quote:

Originally Posted by specialtyretail

Curt,, the wiring has deteriorated to rust. Let me see if the boot and ring will come of without destroying it. Thanks, Fred.

Thanks man, mine is pretty toast. Rust never sleeps

Quote:

Originally Posted by jaybatta

Hey Fred, if Curt is going to pass on cab clearance light wiring, I might be interested. I'm looking to get an original harness to make a pattern from. Is there enough there to do that?

Thanks

Joe

It's all yours if Fred can help you out

Danny Bost · 04-19-2018, 10:26 AM

How much for the complete clutch linkage from pedal to. Shift fork shipped to 87415?
Thanks Danny

**specialtyretail** · 04-19-2018, 10:37 AM

Quote:

Originally Posted by Danny Bost

How much for the complete clutch linkage from pedal to. Shift fork shipped to 87415?
Thanks Danny

Hey Danny;. Let me get it pulled and show what all I have. It will be Saturday before I can get to that. Real job and life gets in the way sometimes. Thanks, Fred.

jessemthompson · 04-19-2018, 10:38 AM

I’m looking for a bolt for the driver side inner fenderwell. It’s the inner bolt with a large washer that bolts to the frame.

**specialtyretail** · 04-19-2018, 10:42 AM

Quote:

Originally Posted by jessemthompson

I’m looking for a bolt for the driver side inner fenderwell. It’s the inner bolt with a large washer that bolts to the frame.

I have that, off and ready to go. How about $6.00. That will cover shipping and give me money to buy a soda. Thanks, Fred.

jessemthompson · 04-19-2018, 11:15 AM

Quote:

Originally Posted by specialtyretail

I have that, off and ready to go. How about $6.00. That will cover shipping and give me money to buy a soda. Thanks, Fred.

Sent! Tyvm

**specialtyretail** · 04-19-2018, 12:44 PM

Quote:

Originally Posted by jessemthompson

Sent! Tyvm

It should go out Friday. Thanks, Fred

**specialtyretail** · 04-19-2018, 12:48 PM

Quote:

Originally Posted by med.bronze

If it helps on the shipping for the exhaust manifolds I’m actually only needing the passenger side. Mirrors look good, I’ll definitely take those. Thanks-Ryan

Hey Ryan, if you just need the passenger side exhaust, I can work with that. It is gonna run about $20.00 to ship it, close to the same for the mirrors because of the distance and size of them. $100.00 shipped for those parts if you still need them. Thanks, Fred.

**med.bronze** · 04-19-2018, 01:12 PM

Quote:

Originally Posted by specialtyretail

Hey Ryan, if you just need the passenger side exhaust, I can work with that. It is gonna run about $20.00 to ship it, close to the same for the mirrors because of the distance and size of them. $100.00 shipped for those parts if you still need them. Thanks, Fred.

Sounds good Fred. PayPal payment coming your way....

kv63 · 04-19-2018, 01:33 PM

Hey Fred. Are the front bumper brackets the same as a 1972 Blazer? If so how much shipped to 90713?

**specialtyretail** · 04-19-2018, 02:38 PM

Quote:

Originally Posted by kv63

Hey Fred. Are the front bumper brackets the same as a 1972 Blazer? If so how much shipped to 90713?

I cannot answer that question. Is your Blazer two wheel drive or four wheel drive. These are pretty tweaked up as well. Thanks, Fred.

kv63 · 04-19-2018, 02:49 PM

It’s 4x4. Any chance you can take a picture of the driver side front bumper bracket?

**specialtyretail** · 04-19-2018, 03:06 PM

Quote:

Originally Posted by kv63

It’s 4x4. Any chance you can take a picture of the driver side front bumper bracket?

they are different, 2wd and 4wd. Thanks, Fred.

kv63 · 04-19-2018, 03:45 PM

Thank you for the reply.

**specialtyretail** · 04-20-2018, 10:41 AM

Quote:

Originally Posted by kv63

Thank you for the reply.

Not a problem. Thanks, Fred.

**jaybatta** · 04-25-2018, 03:43 PM

Hey Fred, any luck on the cab clearance light harness? Enough to make a pattern?

Thanks

Joe

projectking · 04-25-2018, 07:43 PM

I need the back 18” of frame rail shipped to 60462

04-18-2018, 11:13 AM	#26
cst204x4 Registered User Join Date: Jan 2012 Location: corunna michigan Posts: 1,999	Re: Parting 71 C30 dually Sounds good I’ll take blower motor and hardware sending paypal __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles Last edited by cst204x4; 04-18-2018 at 10:00 PM.

04-18-2018, 11:37 AM	#27
BAWAlex Registered User Join Date: Oct 2013 Location: Fritch, TX Posts: 56	Re: Parting 71 C30 dually I will take the set of single groove water pump pulley and single groove crankshaft pulley, matched set of pulleys. $20.00 shipped for the set. Paypal on the way and sending PM with address. Thanks!! __________________ 1966 C10 Long Stepside (1978-3rd Owner) 1971 Custom/10 LWB (2016-3rd Owner) 2011 Camaro LT (2014-2nd Owner) ================================ "I did it, and I can't undo it." Louise

04-19-2018, 10:26 AM	#35
Danny Bost Registered User Join Date: Dec 2009 Location: Aztec NM Posts: 229	Re: Parting 71 C30 dually How much for the complete clutch linkage from pedal to. Shift fork shipped to 87415? Thanks Danny __________________ Danny 71 SWB

04-19-2018, 10:38 AM	#37
jessemthompson Registered User Join Date: Nov 2011 Location: Williamsburg, VA Posts: 955	Re: Parting 71 C30 dually I’m looking for a bolt for the driver side inner fenderwell. It’s the inner bolt with a large washer that bolts to the frame.

04-19-2018, 01:33 PM	#43
kv63 Registered User Join Date: Nov 2017 Location: Lakewood, Ca Posts: 143	Re: Parting 71 C30 dually Hey Fred. Are the front bumper brackets the same as a 1972 Blazer? If so how much shipped to 90713?

04-19-2018, 02:49 PM	#45
kv63 Registered User Join Date: Nov 2017 Location: Lakewood, Ca Posts: 143	Re: Parting 71 C30 dually It’s 4x4. Any chance you can take a picture of the driver side front bumper bracket?

04-19-2018, 03:45 PM	#47
kv63 Registered User Join Date: Nov 2017 Location: Lakewood, Ca Posts: 143	Re: Parting 71 C30 dually Thank you for the reply.

04-25-2018, 03:43 PM	#49
jaybatta Senior Member Join Date: Apr 2014 Location: Livingston, MT Posts: 834	Re: Parting 71 C30 dually Hey Fred, any luck on the cab clearance light harness? Enough to make a pattern? Thanks Joe __________________ Joe 1968 K20 1970 K20 Semper Fi

04-25-2018, 07:43 PM	#50
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Parting 71 C30 dually I need the back 18” of frame rail shipped to 60462 __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.